内存 的英文翻译(translate 内存 to english)

You can look at the db cfg parms that make this:buffer pools, lock list,package cache, catalog cache and util_heap and check the sum of all these values.

即使是在 32 位世界中拥有十分干净的内存模型的 Solaris 上，用于 DB2 缓冲池的内存也不能超过 3.35 GB；4 GB 内存空间的其余内存必须专用于 DB2 的其它共享内存用途。

If the disk is infected with the virus, the memory is read the first part of the virus program, it has been modified after the control of the size of memory space available in high-end memory think of a region, and moved to the first part of the area, and then read on the disk "bad cluster" in the second part of the first part and to put together, so that all proceedings on the presence of the virus in memory of the high-end, and then modify the interrupt vector INT13H or other interrupt vector to the high-end virus program, then you can read the original boot memory and the control over to it to complete the system startup.

如果是染上病毒的盘，读到内存的是病毒程序的第一部分，它得到控制权后修改内存可用空间的大小，在内存高端辟出一块区域，并把第一部分移至该区，接着读入放在磁盘"坏簇"中的第二部分，并和第一部分拼起来，使病毒程序全部驻留在内存的高端，然后修改INT13H的中断向量或其它中断向量，使其向高端的病毒程序，这时即可把原引导程序读到内存中，并把控制权交给它以完成系统的启动。

Dual Inline Memory Module HYS72V32300GR-7.5-C2, provides a 64-bit data path, and this type of interface to the memory of flapper contacts on both sides of the data interface, this interface model is widely used in the present computer memory , the usually 84-pin, because it is bilateral, so a total of 84 × 2 = 168 line contact, so people often called the 168 line to the memory of this memory, it is known as the 168 line memory.

双列直插式存储模块HYS72V32300GR-7.5-C2，提供了64位的数据通道，而且这种类型接口内存的插板两边都有数据接口触片，这种接口模式的内存广泛应用于现在的计算机中，通常为84针，由于是双边的，所以共有84×2=168线接触，所以人们常把这种内存称为168线内存，故称为168线内存条。

If the number of variables or arrays being added with ADDITIVE plus the number of existing variables exceeds the variable limit, Microsoft Visual FoxPro brings as many variables and arrays as possible into memory from the variable file or memo field.

如果使用 ADDITIVE 时，要添加的内存变量或内存变量数组的数目加上已有内存变量的数目超过了系统对内存变量数目的限制，Visual FoxPro 将从内存变量文件或备注字段中恢复尽可能多的内存变量和内存变量数组。

Any motherboard chipset of DIMM memory slots of the maximum output power is limited, this is the same time, we double-sided multi-use memory and stuck all the memory slots, and a total capacity of memory did not reach the motherboard chipset supported by the upper limit of memory, the computer does not recognize a total capacity of memory, and even can not open one of the major reasons.

任何主板芯片组都对DIMM内存插槽(或是其他形式的内存插槽)的最大输出功率有限制，这也就是我们同时使用多根双面内存将所有内存插槽插满，而内存总容量并没有达到主板芯片组所支持的内存上限时，计算机无法识别内存总容量，甚至是无法开启的一个重要原因。

D. Declaration of nonprimitive types such as String, Vector ans so on allocates memory space for the object.

但是严格来讲此题的答案有待确定，因为只有原始类型的实例变量和类变量的声明在类对象被创建/类被加载时完成内存的自动分配，而原始类型的局部变量必须显式初始化，从这点来看原始类型的局部变量没有被自动分配内存，SL275中只提出了非原始数据类型的变量必须使用new Xxxx完成内存的分配而没有指出原始数据类型的变量是否在声明时即自动进行内存分配，而从局部变量不能在显式初始化前使用这点来看在声明时没有进行内存分配。

Based on the analysis of the embedded system and embedded software development process and memory management, we researched the unitary requirement and particular requirement for memory management module of embedded software development platform. Then the infrastructure of communication industry oriented embedded software development platform had been described, and the design ideas of memory management module of embedded software development platform had been put up: kernel data section management, process stack and data section management , UB section management , high mapping address management and specific implementing code to realize the application, release, protection, leak detection, system information providing of memory.

本文在分析了嵌入式系统及嵌入式软件开发过程及其内存管理的特点的基础上，研究嵌入式软件开发平台的整体需求和对内存管理模块的具体需求；描述了面向通信行业的嵌入式软件开发平台的整体结构，具体提出了嵌入式软件开发平台内存管理模块的设计思想：核心数据区管理+进程堆栈与数据区管理+UB区管理+高端映射地址的管理，和具体实现代码来实现内存申请与释放、内存保护、内存泄漏检查、提供系统内存信息等功能。

The data location includes memory data memorizer and memory map register, which share uniform data and address buses, at the same time occupy independent physical spaces, respectively, both physical and logic addresses separated and independently addressed, respectively, and can multiplex the same logic address.

内存数据存储器和内存映射寄存器共享统一的数据总线和数据地址总线。同时，内存数据存储器和内存映射寄存器各自占有独立的物理空间，物理地址和逻辑地址均分开，各自独立编址，内存数据存储器和内存映射寄存器对同一逻辑地址可以复用。

The data such as current time, memory total amount, available memory, memory swap file size, available memory swap file size, virtual memory size, available virtual memory size, last random seed and random seed provided by application program have been adopted as random number seed. Thus the problem has been solved efficiently. 2. Solve the self-security integrality problem of common data security architecture.

采用软件方式来实现其随机种子的采集，并采用当前时间、内存总数、可用内存、内存交换文件大小、可用内存交换文件大小、虚拟内存大小、可用虚拟内存大小、上次的随机种子、应用程序提供的随机种子等数据作为随机数种子，有效地解决了这一问题。

As the memory management functions self-offered by VxWorks which use first fit algorithm can not satisfy the demands of strict timeliness and efficiency of memory management in the communication applications of software, to solve the problem, a new realizing method of memory management was advanced for the software development platform based on VxWorks using two completely independent memory pool sets—one for process communication, and the other for the applications, with the platform directly managing the ...

因VxWorks自身提供的内存管理函数采用first-fit算法，不能满足通信应用领域软件对内存管理的高实时性和内存利用率的要求，为了解决该问题，基于VxWorks软件开发平台给出新的内存管理实现方法：采用两套完全独立的内存池集——进程通信内存池集和应用内存池集，平台直接管理内存，为整个系统提供高效的动态内存管理机制，使新定义的内存管理模块更适合通信产品应用领域的嵌入式软件开发。