|
Surface and bulk sorption of uranium(VI) onto granite rock
Surface and bulk sorption of U(VI) onto granite rock with different types of surfaces were carried out and the results were compared for the different surfaces such as crushed granite, machined core granite, and core granite with fractured surface. The sorption behavior of U(VI) dependent on surface types was investigated and discussed for contacting time, pH, constituent minerals, and surface area. Results from the sorption experiments were also compared each other in order to analyze the differences in sorption behaviors of U(VI) and to correlate the surface sorption coefficient Ka and the bulk sorption coefficient Kd. The effect of contact time and pH on the sorption of U(VI) onto fractured surfaces was larger than that onto the machined fresh surfaces but smaller than that onto the crushed surfaces. As expected, it was noticed that the surface sorption coefficients of U(VI) for the natural fracture surfaces were greater than those of the machined fresh surfaces due to the higher content of secondary minerals such as calcite and chlorite which acted as stronger sorbents. It is presumed that there are many micro-fractures or micro-pores available for the uranium sorption on the granite surfaces, even on the machined fresh surfaces, and there can be an intrinsic difference between the surface and the bulk sorption due to the different types of surfaces.
|