H3C 交换机配置静态聚合(trunk/access)模式

1.三层核心交换机：S7005e 2.二层交换机：S5120 v2

创建vlan（如果已经存在可跳过此步骤） [H3C]vlan 20 设置名称（Test可自行更改） [H3C-vlan20]name Test 返回系统视图 [H3C-vlan20]qu 进入vlan 20 [H3C]interface vlan 20 修改vlan标签（Test可自行更改） [H3C-Vlan-interface20]description Test vlan添加IP地址（192.168.200.1网关地址可自行修改） （24子网掩码，可自行修改（也可255.255.255.0）） （（192.168.200.1 24）等同（192.168.200.1 255.255.255.0）） [H3C-Vlan-interface20]ip address 192.168.200.1 24 返回系统视图 [H3C-Vlan-interface20]qu 配置聚合组（组ID：20（可自行修改）） [H3C]interface Bridge-Aggregation 20 修改汇聚组标签 [H3C-Bridge-Aggregation20]description Test 修改聚合组端口信息与vlan配置 根据聚合模式选择（trunk/access） [H3C-Bridge-Aggregation20]port link-type access 添加端口到vlan（两种模式只能选择一种不能共存） access模式添加 [H3C-Bridge-Aggregation20]port access vlan 20 trunk模式添加（两种模式只能选择一种不能共存） [H3C-Bridge-Aggregation20]port trunk permit vlan 20 返回系统视图 [H3C-Bridge-Aggregation20]qu #设置需要汇聚的物理端口（只演示一个端口的配置，多个端口请自行复制粘贴） 进入端口视图 [H3C]interface GigabitEthernet 1/0/1 端口模式配置与汇聚端口相同（命令执行是相同） [H3C-GigabitEthernet1/0/1]port link-type access [H3C-GigabitEthernet1/0/1]port access vlan 20 端口加入汇聚组（ID：20） [H3C-GigabitEthernet1/0/1]port link-aggregation group 20 在把需要汇聚的端口都配置好，自此三层核心的交换机就已经完成（汇聚组ID：20）的配置，如需更多的汇聚组请参考此列。

查看全部汇聚组信息 ]display link-aggregation verbose 显示： Loadsharing Type: Shar – Loadsharing, NonS – Non-Loadsharing Port: A – Auto Port Status: S – Selected, U – Unselected, I – Individual Flags: A – LACP_Activity, B – LACP_Timeout, C – Aggregation, D – Synchronization, E – Collecting, F – Distributing, G – Defaulted, H – Expired

GE1/0/1 S 32768 1（S：Static的意思） GE1/0/2 S 32768 1（S：静态模式）

Aggregate Interface: Route-Aggregation1 Aggregation Mode: Static Loadsharing Type: Shar

查看汇聚组20的信息 display interface Bridge-Aggregation 20 以下是配置后的端口信息 Bridge-Aggregation20 Current state: UP IP packet frame type: Ethernet II, hardware address: 1a46-e48a-0100 Description: Test Bandwidth: 2000000 kbps 2Gbps-speed mode, full-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation PVID: 20 Port link-type: Access Tagged VLANs: None Untagged VLANs: 20 Last clearing of counters: Never Last 300 second input: 0 packets/sec 0 bytes/sec 0% Last 300 second output: 0 packets/sec 0 bytes/sec 0% Input (total): 0 packets, 0 bytes 0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses Input (normal): 0 packets, 0 bytes 0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses Input: 0 input errors, 0 runts, 0 giants, 0 throttles 0 CRC, 0 frame, 0 overruns, 0 aborts 0 ignored, 0 parity errors Output (total): 0 packets, 0 bytes 0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses ---- More ----

前言：相对于三层核心的配置，二层交换机就显的简单很多 对于access模式的只需要把对应汇聚组的端口修改到相同的vlan ID，然后创建汇聚组 加入对应的端口，在新的H3C设备种已经不需要在二层设置access模式，默认模式下也可以自动识别，只需要将其他端口加入。

查看汇聚组20的信息 display interface Bridge-Aggregation 20 以下是配置后的端口信息 Bridge-Aggregation20 Current state: UP IP packet frame type: Ethernet II, hardware address: 1a77-315c-0200 Description: Test Bandwidth: 2000000 kbps 2Gbps-speed mode, full-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation PVID: 20 Port link-type: Access Tagged VLANs: None Untagged VLANs: 20 Last clearing of counters: Never Last 300 second input: 0 packets/sec 0 bytes/sec 0% Last 300 second output: 0 packets/sec 0 bytes/sec 0% Input (total): 0 packets, 0 bytes 0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses Input (normal): 0 packets, 0 bytes 0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses Input: 0 input errors, 0 runts, 0 giants, 0 throttles 0 CRC, 0 frame, 0 overruns, 0 aborts 0 ignored, 0 parity errors Output (total): 0 packets, 0 bytes 0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses ---- More ----