Fritzbox 7520

2023-04-05 21:00| 来源: 网络整理| 查看: 265

Hi there,

I have installed a Frizbox 7520 with OpenWrt SNAPSHOT r22400-1558bbd116, followed the instructions from the install guide. Basically things are working like WiFi with Mesh and different APs...

But I can't get DSL to work. I have downloaded the firmware, created the symbolic link like described in the install guide.

I also tried various configurations from the ISP configurations. Actually is connected to O2 DSL in Germany.

From a original Fritzbox which is working and the capture from there, I have the information as follows.

ADSL 2+ (ITU G.992.5) Annex J Encapsulation type: RFC 1483 ATM (10) 802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 7

Here the relevant parts from /etc/config/network.

config atm-bridge 'atm' option vpi '1' option vci '32' option encaps 'llc' option payload 'bridged' config dsl 'dsl' option annex 'j' option firmware '/lib/firmware/vdsl.bin' option ds_snr_offset '0' option xfer_mode 'atm' option line_mode 'adsl' config device 'wan_dev' option name 'dsl0' option macaddr 'AB:CD:EF:AB:CD:EF' config interface 'wan' option proto 'pppoe' option password '***' option username 'DSL***@s92.bbi-o2.de' option delegate '0' option ipv6 'auto' option device 'dsl0.7'

I haven't used OpenWRT with DSL before and happy about any hint and help here. Also a bit lost where to look for error messages.

Thanks Thomas

【本文地址】

公司简介

联系我们