[Device Support Request] Aqara Curtain Driver E1 (lumi.curtain.agl001) 路 Issue #2003 路 zigpy/zha | 您所在的位置:网站首页 › lumi-curtain-hmcn01_mibtCDDF › [Device Support Request] Aqara Curtain Driver E1 (lumi.curtain.agl001) 路 Issue #2003 路 zigpy/zha |
I am trying to control a curtain set with two lumi.curtain.agl001 motors. Not so easy. Just as mentioned above I am missing Entity to reverse opening direction. Battery level sensor. Light level sensor. Correct Power source to battery. Display device firmware version.I can work around the reverse directions for the right curtain, but not around the other issues. But I have another major problem ..... that is the position of the motors. There is a command ^cover.set_cover_position^ and according to info found position has a range from 0 .. 100 where 0 = closed and 100 is open, (https://www.home-assistant.io/integrations/cover.template/) However that is where the problems are starting: because "how to set the open position" and "how to set the closed position" and for the right side curtain it is of cause mirrored and you have to re-calibrate the "open position" and the "closed position" every time the roller slippedI have really no idea how to set those closed and open position reference points using the software And the behavoir when changing the position slider .... is strange .... I do not understand What ever I would be very very very glad with an updated ZHA-driver and perhaps also firmware for this device !!! To work around the positioning issues, I consider to use sensors at the closed and open position at each site ..... That makes the whole thing of course more expensive and far more complex .... but I do not see an other option at the moment. .... And it does not help against other issues like ..... unkown battery level etc ... So, again updates will be highly appreciated |
CopyRight 2018-2019 实验室设备网 版权所有 |