ITE Tech. Inc.

Features (DisplayPort RX)

·   Compliance with DisplayPort Specification V1.1a at 1.62/2.7 Gbps data rate (Low bit rate/High bit rate)

·   Support flexible 1/2 lanes configurations; 5.4 Gbps data rate support (2 lanes at 2.7Gbps)

·   Support DPCD Rev.1.1

·   Support Spread Spectrum Clocking up to 0.5% down-spread to reduce EMI

·   Support Source Connection Detection through AUX channel DC levels

·   Automatic loss of signal detection for Link management

·   Intelligent, programmable power management

·   Embedded Block0 EDID RAM to saving BOM cost

·   Compliance with “DP only” or “DP++” Source device

Features (VGA DACs)

·   Tripe 8-Bit DAC Converters

·   230 MSPS Throughput Rate

·   Embedded Compensated Circuits.

·   Complementary Outputs

·   DAC Output Current Range 2mA to 18.5mA

·   VESA VSIS V1r2 Compliant

Features (Combined)

·   Support up to QXGA(2048x1536), QWXGA(2048x1280 RB), WUXGA(1920X1200 RB) and UXGA(1600x1200) VESA display format

·   Support DP Input deep color depth up to 12bit, and support VGA output color depth to 8bit

·   Embedded MCU and Flash

·   8KV ESD Protection (Human Body Mode) on VGA pins

·   Embedded 3.3V to 1.8V power regulator

·   Embedded Crystal

·   Active mode current consumption at 162 Mhz UXGA resolution is ~245mA.

·   32-pin QFN (4mm x 4mm) package

·   RoHS Compliant ( 100% Green available )