|
Surface Regulation through Dipolar Molecule Boosting the Efficiency of Mixed 2D/3D Perovskite Solar Cell to 24%
Mixed 2D/3D perovskite solar cells (PSCs) show promising performances in efficiency and long-term stability. The functional groups terminated on a large organic molecule used to construct 2D capping layer play a key role in the chemical interaction mechanism and thus influence the device performance. In this study, 4-(trifluoromethyl) benzamidine hydrochloride (TFPhFACl) is adopted to construct 2D capping layer atop 3D perovskite. It is found that there are two mechanisms synergistically contributing to the increase of efficiency: 1) The TFPhFA+ cations form a dipole layer promoting the interfacial charge transport. 2) The suppressed nonradiative recombination of perovskite through the coordination of TFPhFA+ cations with Pb–I octahedron, as well as the recrystallization of 3D perovskite induced by Cl- ions. As a result, the PSC delivers an efficiency of 24.0% with improved open-circuit voltage (VOC) of 1.16 V, short-circuit current density (JSC) of 25.42 mA cm-2, and fill factor of 81.26%. The device shows no decrease in efficiency after 1500 h stored in the air indicating the good stability. The utilization of TFPhFACl not only provides a facile way to optimize the interfacial problems, but also gives a new perspective for rational design of large spacer molecule for constructing efficient 2D/3D PSCs.
|