武汉理工大学机电工程学院欢迎您 | 您所在的位置:网站首页 › 武汉理工大学阎银泉简历图片 › 武汉理工大学机电工程学院欢迎您 |
姓名:高忠梅 性别:女 出生年月:1988年8月 职称:副教授 学历:博士研究生 学位:博士 电话:15927250013
个人简历: 2019.07-至今 武汉理工大学机电工程学院 讲师、副教授 2014.09-2019.06 华中科技大学机械科学与工程学院 工学博士 2017.03-2018.03 美国宾西法尼亚州立大学 联合培养博士 2013.07-2014.07 武昌船舶重工有限责任公司 设计员 2010.09-2013.06 西安交通大学机械工程学院(保送) 工学硕士 2006.09-2010.06 西北农林科技大学机电工程学院 工学学士
主要研究方向: 激光-电弧复合焊接过程数值仿真、焊接工艺智能优化
主持项目: 横向项目:船用钢板激光-电弧复合焊接成形机理及工艺研究,2022.06-2024.06 国家重点实验室项目:磁场辅助不锈钢中厚板激光-电弧复合焊接底部驼峰抑制机制研究,2021.01-2022.12 自主创新研究基金项目:激光-电弧复合焊接中等离子体行为数值模拟,2020.01-2021.10 教研项目:新工科背景下基于MOOC的机械类专业基础课程双语教学模式探究—以国家精品在线课程《互换性与测量技术》为例,2020.07-2022.06 主要成果简述: 目前发表SCI论文10余篇,担任Journal of Intelligent Manufacturing, Frontiers in Mechanical Engineering, Materials, Metals等期刊审稿人,《焊接学报》兼职编辑。代表性论文如下:
1. Crater wear prediction in turning Ti6Al4V considering cutting temperature effect. International Journal of Advanced Manufacturing Technology, 2022, 121(9-10): 6763-6781. 2. Formation mechanism and control of solidification of cracking in laser-welded joints of steel/copper dissimilar metals, Metals, 2022, 12(7): 1147. 3. Numerical analysis of hybrid plasma in fiber laser-arc welding. Journal of Physics D: Applied Physics, 2019, 52(2): 025206. 4. Investigation on the weld bead profile transformation with the keyhole and molten pool dynamic behavior simulation in high power laser welding. International Journal of Heat and Mass Transfer, 2018, 116: 1304-1313. 5. Study on droplet transfer and weld quality in laser-MIG hybrid welding of 316L stainless steel. International Journal of Advanced Manufacturing Technology, 2017, 88: 483-493. 6. Parameters optimization of hybrid fiber laser-arc butt welding on 316L stainless steel using Kriging model and GA. Optics & Laser Technology, 2016, 83: 153-162. 7. Multi-objective optimization of weld geometry in hybrid fiber laser-arc butt welding using Kriging model and NSGA-II. Applied Physics A, 2016, 122: 610.
对研究生的要求: 诚实守信、踏实认真、有良好的团队合作精神。具备良好的数学与英文基础者优先。
|
CopyRight 2018-2019 实验室设备网 版权所有 |