FEIT BPA800/RGBW/AG/2(P) Template issues · Issue #6534 · arendst/Tasmota · GitHub

@CWhits - there are multiple bulbs with that part number. We're working on the newer ones where the FCC ID ends in G2

@DSuds, I think you're referring to FCC ID SYW-A19RGBWAGT2 which from my sampling of bulbs carries a model number on the bulb of BPA800/RGBW/AG/2(P). The older bulbs from Costco do not have the "(2)" at the end and have an FCC ID of FCC ID SYW-A19RGBWAGT1. The print is small and it is easy to mistake what you are looking at.

It should also be pointed out that the default for LedTable changed on release 6.5.0.9 and above to default to "On". So I suspect that some of us that started with the older firmware such as 6.5.0 and upgraded saw one result. And those of us who started with newer or did a config reset saw a different result. For me, LedTable 0 made things work as expected.

Currently, I am running Project sonoff Sonoff Version 6.6.0.15(7f2b6c7-sonoff)-2_4_2

Just did these console commands to start over.

Wait for restart

Wait for restart

At this point, all 5 channels appear to be tracking the Dim/Bright slider. After touching the Warm/Cold slider, the RGB LEDs are no longer tracking the Dim/Bright slider. And both sliders have the expected result. For me, 9% brightness appears to be the turn-on point for CWWW.

Additional observations:

Setting Channel1 through Channel3 resets Channel4 & 5 - IMO this is good. However, setting channel4 and channel5 does not reset channels1 through 3.

Regarding RGBW option: The bulb is rated at 9 Watts. The Cold/Warm LED blend draws 9 Watts at full brightness. The RGB LEDs draw 3 Watts at full brightness. The two combined is 12 Watts, exceeding the power rating. The cone base gets pretty hot at 9 Watts. I don't have the original Feit software installed to compare against/reverify; however, I don't think RBG and White combined was an option. I think it was RGB or Warm/Cold. Can anyone confirm this?