Controlled Impedance PCB Layer Stackup | 您所在的位置:网站首页 › 如何泡鸭爪才好吃视频 › Controlled Impedance PCB Layer Stackup |
Multilayer high precision PCB's with impedance control JLCPCB can produce High-precision multilayer board with capabilities listed in below table. Min. Trace width/Spacing Min. Via Min. BGA 3.5mil 0.2mm 0.25mmIt is very convenient for customers to conduct an impedance matching design, according to JLCPCB鈥檚 laminated structure and related parameters. The PCB will be strictly produced in accordance with the following stackup. Controlled Impedance PCB Parameters and Stackup 1.Prepreg dielectric constant: Prepreg type Dielectric constant 7628 4.6 3313 4.05 2116 4.252.Solder mask Parameters Solder mask thickness over the laminate Solder mask thickness over traces Solder mask dielectric constant 0.8mil 0.8mil 3.83. Core dielectric constant Core dielectric constant 4.6For your convenience, we have designed an Impedance Calculator to help you calculate the impedance and the trace width you require. 4-Layer Impedance Control Stackup Thickness Outer Copper Weight inner Copper Weight 1) No requirement Stackup Layer Material Type Thickness2) JLC04161H-7628 Stackup Layer Material Type Thickness3) JLC04161H-3313 Stackup Layer Material Type Thickness4) JLC04161H-1080 Stackup Layer Material Type Thickness5) JLC04161H-7628A Stackup Layer Material Type Thickness6) JLC04161H-7628B Stackup Layer Material Type Thickness7) JLC04161H-3313A Stackup Layer Material Type Thickness8) JLC04161H-1080A Stackup Layer Material Type Thickness9) JLC04161H-2116A Stackup Layer Material Type Thickness10) JLC04161H-2116B Stackup Layer Material Type Thickness11) JLC04161H-2116C Stackup Layer Material Type Thickness0.2mm (7.87 mil) is nominal thickness of 7628 prepreg. Use 7.1 mil as the thickness when the controlled impedance tracks are on top/bottom, use 8.1 mil when tracks are inside. 6-Layer Impedance Control Stackup Thickness Outer Copper Weight inner Copper Weight 1) No requirement Stackup Layer Material Type Thickness2) JLC06161H-3313 Stackup Layer Material Type Thickness3) JLC06161H-7628 Stackup Layer Material Type Thickness4) JLC06161H-1080 Stackup Layer Material Type Thickness5) JLC06161H-2116A Stackup Layer Material Type Thickness6) JLC06161H-3313A Stackup Layer Material Type Thickness0.1mm (3.94 mil) is nominal thickness of 3313 prepreg. Use 3.5 mil as the thickness of 3313 prepreg when the controlled impedance tracks are on top/bottom, use 5.5 mil(2116 prepreg) or 8.5mil(7628 prepreg) when tracks are inside. |
CopyRight 2018-2019 实验室设备网 版权所有 |