查看SuSE的网卡数量以及速度 | 您所在的位置:网站首页 › 如何查看网卡带宽 › 查看SuSE的网卡数量以及速度 |
jiangshouzhuang:~ # lspci | grep Ethernet 02:00.0 Ethernet controller: ServerEngines Corp. Emulex OneConnect 10Gb NIC (be3) (rev 03) 02:00.1 Ethernet controller: ServerEngines Corp. Emulex OneConnect 10Gb NIC (be3) (rev 03) 04:00.0 Ethernet controller: Emulex Corporation Device e220 (rev 10) 04:00.1 Ethernet controller: Emulex Corporation Device e220 (rev 10) 04:00.2 Ethernet controller: Emulex Corporation Device e220 (rev 10) 04:00.3 Ethernet controller: Emulex Corporation Device e220 (rev 10) 0b:00.0 Ethernet controller: Broadcom Corporation Device 1657 (rev 01) 0b:00.1 Ethernet controller: Broadcom Corporation Device 1657 (rev 01) 0b:00.2 Ethernet controller: Broadcom Corporation Device 1657 (rev 01) 0b:00.3 Ethernet controller: Broadcom Corporation Device 1657 (rev 01)
linux84:~ # ethtool eth6 Settings for eth6: Supported ports: [ ] Supported link modes: Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Speed: 10000Mb/s Duplex: Full Port: Other PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: g Wake-on: g Link detected: yes
注: ethtool是用于查询及设置网卡参数的命令。 概要: ethtool ethX //查询ethX网口基本设置 ethtool –h //显示ethtool的命令帮助(help) ethtool –i ethX //查询ethX网口的相关信息 ethtool –d ethX //查询ethX网口注册性信息 ethtool –r ethX //重置ethX网口到自适应模式 ethtool –S ethX //查询ethX网口收发包统计 ethtool –s ethX [speed 10|100|1000] //设置网口速率10/100/1000M [duplex half|full] //设置网口半/全双工 [autoneg on|off] //设置网口是否自协商 [port tp|aui|bnc|mii] //设置网口类型 [phyad N] [xcvr internal|exteral] [wol p|u|m|b|a|g|s|d...] [sopass xx:yy:zz:aa:bb:cc] [msglvl N] |
CopyRight 2018-2019 实验室设备网 版权所有 |