什么是驻波比和驻波,请问什么叫驻波比? 您所在的位置:网站首页 啥叫驻波 什么是驻波比和驻波,请问什么叫驻波比?

什么是驻波比和驻波,请问什么叫驻波比?

2024-05-09 07:34| 来源: 网络整理| 查看: 265

什么是驻波比和驻波,请问什么叫驻波比? 综合百科 最后更新:2024-05-09 05:59:10 普羅旺斯的淚 发布:3年前 8万阅读

据绿润百科网站「普羅旺斯的淚」消息,近日,什么是驻波比和驻波,请问什么叫驻波比?引发热议,什么是驻波比和驻波同样引起许多争议,对此众网友各抒己见。但到底是怎么回事呢?绿润百科为您解答。

什么叫驻波比

驻波比全称为电压驻波比,又名VSWR和SWR。指驻波波腹电压与波谷电压幅度之比,又称为驻波系数、驻波比。驻波比等于1时,表示馈线和天线的阻抗完全匹配,此时高频能量全部被天线辐射出去,没有能量的反射损耗,驻波比为无穷大时,表示全反射,能量完全没有辐射出去。

驻波比就是一个数值,用来表示天线和电波发射台是否匹配。如果 SWR 的值等于1,则表示发射传输给天线的电波没有任何反射,全部发射出去,这是最理想的情况。如果SWR 值大于1,则表示有一部分电波被反射回来,最终变成热量,使得馈线升温。被反射的电波在发射台输出口也可产生相当高的电压,有可能损坏发射台。

什么是驻波比和驻波

Q:什么是驻波比和驻波?

A:驻波比指的是在传输线上发生反射时,传输线上反射波与前向波的电压幅度之比,用来描述传输线上信号的反射情况。而驻波是指在传输线上由于反射波和前向波的叠加所形成的电压分布图案。静态的驻波分布图案是由固定端口的信号和传输线媒介的特性所决定的。

Q:为什么驻波比和驻波很重要?

A:驻波比和驻波是无线电通信中非常重要的概念,这涉及到了电磁波在传输线上的传输和反射。当信号在传输线上传输时,会受到反射,并且反射波的强度将会与传输线的阻抗匹配度有关。如果阻抗不匹配,则反射波的幅度会增加,从而导致驻波比和驻波的出现。这会影响信号质量和传输效率,因此必须找到合适的方法来降低驻波比和驻波的存在。

Q:如何降低驻波比和驻波的存在?

A:降低驻波比和驻波的存在可以通过以下方式实现:

1. 选择合适的传输线,使得传输线的特性阻抗匹配度更好。

2. 通过使用同轴电缆,将阻抗匹配电路以及负载电路与发射器匹配。

3. 保证每个连接点都有良好的接触,并且将所有电缆插头紧密地连接在一起,以确保稳定的信号传输。

【英文介绍/For English】:

Standing wave ratio is called voltage standing wave ratio, also known as VSWR and SWR. Refers to the ratio of the standing wave antinode voltage to the valley voltage amplitude, also known as standing wave coefficient and standing wave ratio. When the standing wave ratio is equal to 1, it means that the impedance of the feeder and the antenna are completely matched. At this time, all high-frequency energy is radiated by the antenna, and there is no reflection loss of energy. When the standing wave ratio is infinite, it means total reflection, and no energy is radiated at all.

Standing wave ratio is a numerical value, which is used to indicate whether the antenna and radio wave transmitter match. If the value of SWR is equal to 1, it means that the radio waves transmitted to the antenna are transmitted without any reflection, and all are transmitted, which is the most ideal situation. If the SWR value is greater than 1, it means that a part of the electric wave is reflected back and eventually turns into heat, which makes the feeder heat up. The reflected electric wave can also generate quite high voltage at the output port of the launch pad, which may damage the launch pad.

声明:本站所有文章资源内容,如无特殊说明或标注,均为采集网络资源。如若本站内容侵犯了原著者的合法权益,可联系本站删除。如若转载,请注明出处:https://www.hbgreen.com.cn/news/2765080ae.html

波比 


【本文地址】

公司简介

联系我们

今日新闻

    推荐新闻

    专题文章
      CopyRight 2018-2019 实验室设备网 版权所有