锐捷 Fat/Fit Ap切换

2023-12-21 20:30| 来源: 网络整理| 查看: 265

工作中要使用锐捷的AP和AC进行组网。记录一下RG-AP220-E配置成瘦AP的方法。

使用console口连接，baudrate rate: 9600, 8n1

瘦AP：console密码是ruijie，enable密码是apdebug

胖AP：console密码是admin，没有默认enable密码。

User Access Verification Password: Ruijie>enable Password: Ruijie#ap-m ? fat Fat mode fit Fit mode Ruijie#ap-m fit apmode will change to FIT. Ruijie#show ap-m current mode: fit Ruijie#show ip ? arp Show IP ARP interface IP interface status and configuration packet IP packet raw-socket Show raw socket ref Show Ruijie Express Forward information route IP routing table sockets Show IPv4 sockets udp Show UDP sockets Ruijie#show ip interface BVI 1 IP interface state is: UP IP interface type is: BROADCAST IP interface MTU is: 1500 IP address is: 192.168.110.1/24 (primary) IP address negotiate is: OFF Forward direct-broadcast is: OFF ICMP mask reply is: ON Send ICMP redirect is: ON Send ICMP unreachable is: ON DHCP relay is: OFF Fast switch is: ON Help address is: Proxy ARP is: OFF ARP packet input number: 0 Request packet : 0 Reply packet : 0 Unknown packet : 0 TTL invalid packet number: 0 ICMP packet input number: 0 Echo request : 0 Echo reply : 0 Unreachable : 0 ＃退出 Ruijie#end # 保存 Ruijie>write

Tony Liu

2017-12-21

【本文地址】

公司简介

联系我们