华为交换机S5735S如何堆叠iStack

2024-07-01 23:28| 来源: 网络整理| 查看: 265

环境：

交换机一：华为S5735S-L24T4S-MA Software Version V200R019C10SPC500

交换机二：华为S5735S-L24T4S-A Software Version V200R019C10SPC500

堆叠口：电口

问题描述：

华为交换机S5735S如何堆叠iStack

解决方案：

堆叠前前往华为网站查询是否支持 https://info.support.huawei.com/network/virtual/index?lang=zh

本案例堆叠口：电口

以太网电接口要求 Category 5及以上标准网线 1Gbit/s 用以太网电接口或100/1000BASE-X以太网光接口做堆叠口时，单设备最多支持2个逻辑堆叠口，每个逻辑堆叠口可以包含1个物理成员口，也可以包含多个物理成员口，最多包含8个物理成员口，单设备最大支持16个物理成员口。

1.查看交换机软件版本是否一致

交换机一：

dis ver Huawei Versatile Routing Platform Software VRP (R) software, Version 5.170 (S5735 V200R019C10SPC500) Copyright (C) 2000-2020 HUAWEI TECH Co., Ltd. HUAWEI S5735S-L24T4S-MA Routing Switch uptime is 0 week, 0 day, 0 hour, 8 minutes ES5D2T28S022 0(Master) : uptime is 0 week, 0 day, 0 hour, 7 minutes DDR Memory Size : 1024 M bytes FLASH Total Memory Size : 512 M bytes FLASH Available Memory Size : 306 M bytes Pcb Version : VER.D BootROM(1st) Version : 0000.0121 BootROM(2nd) Version : 0000.0200 BootLoad Version : 0213.0000 CPLD Version : 0107 Software Version : VRP (R) Software, Version 5.170 (V200R019C10SPC500) FLASH Version : 0000.0000

交换机二：

dis ver Huawei Versatile Routing Platform Software VRP (R) software, Version 5.170 (S5735 V200R019C10SPC500) Copyright (C) 2000-2020 HUAWEI TECH Co., Ltd. HUAWEI S5735S-L24T4S-A Routing Switch uptime is 0 week, 0 day, 1 hour, 42 minutes ES5D2T28S022 0(Master) : uptime is 0 week, 0 day, 1 hour, 41 minutes DDR Memory Size : 1024 M bytes FLASH Total Memory Size : 512 M bytes FLASH Available Memory Size : 306 M bytes Pcb Version : VER.B BootROM(1st) Version : 0000.0121 BootROM(2nd) Version : 0000.0200 BootLoad Version : 0213.0000 CPLD Version : 0107 Software Version : VRP (R) Software, Version 5.170 (V200R019C10SPC500) FLASH Version : 0000.0000

2.堆叠配置先把堆叠线缆连接好

交换机一：

sy Enter system view, return user view with Ctrl+Z. [HUAWEI]sysname STSW1 [STSW1] [STSW1]i g0/0/28 [STSW1-GigabitEthernet0/0/28]shutdown [STSW1-GigabitEthernet0/0/28] May 7 2022 01:52:20 STSW1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change number is 7, the change loop count is 0, and the maximum number of records is 4095. [STSW1-GigabitEthernet0/0/28] [STSW1-GigabitEthernet0/0/28]q [STSW1]interface stack-port 0/1 [STSW1-stack-port0/1]port interface GigabitEthernet 0/0/28 enable Warning: Enabling stack function may cause configuration loss on the interface. Continue? [Y/N]:y Info: This operation may take a few seconds. Please wait... [STSW1-stack-port0/1] May 7 2022 01:54:52 STSW1 %%01IFNET/4/IF_DISABLE(l)[0]:Interface GigabitEthernet0/0/28 has been unavailable. May 7 2022 01:54:52 STSW1 %%01IFNET/4/IF_ENABLE(l)[1]:Interface GigabitEthernet0/0/28 has been available. 设置优先级为200 [STSW1]stack slot 0 priority 200 Warning: Do not frequently modify the priority because it will make the stack split. Continue? [Y/N]: Error: Please choose 'YES' or 'NO' first before pressing 'Enter'. [Y/N]:y 保存配置 sa The current configuration will be written to the device. Are you sure to continue?[Y/N]y

交换机二：

sy Enter system view, return user view with Ctrl+Z. [HUAWEI]sysname STSW2 [STSW2]i g0/0/28 [STSW2-GigabitEthernet0/0/28]shutdown [STSW2-GigabitEthernet0/0/28] [STSW2-GigabitEthernet0/0/28]q [STSW2]stack slot 0 renumber 1 [STSW2]q [STSW2]reboot # 默认100，华为是1-255，值越大优先级越高会被推举为Master [SWB]stack slot 0 priority 10 [SWB]interface stack-port 1/2 [STSW2-stack-port1/1]port interface GigabitEthernet 1/0/28 enable Warning: Enabling stack function may cause configuration loss on the interface. Continue? [Y/N]:y Info: This operation may take a few seconds. Please wait... [STSW2-stack-port1/1] Nov 9 2021 04:34:23 STSW2 %%01IFNET/4/IF_DISABLE(l)[0]:Interface GigabitEthernet1/0/28 has been unavailable. Nov 9 2021 04:34:24 STSW2 %%01IFNET/4/IF_ENABLE(l)[1]:Interface GigabitEthernet1/0/28 has been available. 保存配置 sa The current configuration will be written to the device. Are you sure to continue?[Y/N]y

3.查看堆叠完成配置 dis cu 2台堆叠成一台，查看随便一台配置信息都一样

4.堆叠删除成员

[STSW1]interface stack-port 0/1 [STSW1-stack-port0/1]shutdown i g0/0/28 Info: This operation may take a few seconds. Please wait...succeeded. [STSW1-stack-port0/1]undo port interface GigabitEthernet 0/0/28 enable Warning: Deleting member ports may cause stack split and a loss of all configurations on the interface. Continue? [Y/N]:y Info: This operation may take a few seconds. Please wait.... [STSW1-stack-port0/1] May 7 2022 05:42:35 STSW1 %%01IFNET/4/IF_DISABLE(l)[1]:Interface GigabitEthernet0/0/28 has been unavailable. May 7 2022 05:42:35 STSW1 %%01IFNET/4/IF_ENABLE(l)[2]:Interface GigabitEthernet0/0/28 has been available. [STSW1-stack-port0/1]

【本文地址】

公司简介

联系我们