基于vivado实现FFT/IFFT | 您所在的位置:网站首页 › vivado快速例化 › 基于vivado实现FFT/IFFT |
文章目录
前言一、基本过程二、vivado配置1.新建工程2.调用DDS的IP核2.调用FFT的IP核
三、编写Verilog程序1.顶层文件fft.v2.仿真文件fft_tb.v
四、运行仿真1. 运行仿真设置2. 仿真波形设置3. 结果分析
前言
使用vivado2018.3实现FFT/IFFT,过程比较详细。 一、基本过程例化一个DDS的IP核和两个FFT的IP核分别用作FFT和IFFT变换,将DDS生成的正交信号输入到FFT,再将FFT的信号输出到IFFT中。 打开vivado,界面如下 点击Open Project,进入如下页面,点击Next 调用DDS的IP核,生成10MHz正弦信号 单击IP Catalog,输入dds,找到IP核后,双击 搜索fft,然后找到Digital Signal Processing->Transforms->FFTs目录下的Fast Fourier Transform,双击进入配置界面。 例化IP核,将三个模块连接起来。 点击Add Sources,弹出右侧窗口,选择Add or create design sources,点击Next 代码如下: `timescale 1ns / 1ps module fft( input aclk, input aresetn, output [7:0] fft_real, output [7:0] fft_imag, output [7:0] ifft_real, output [7:0] ifft_imag ); //DDS core wire [15:0] dds_m_data_tdata; wire fft_s_data_tready; wire dds_m_data_tvalid; wire dds_m_data_tlast; dds_compiler_0 dds_MHz ( .aclk(aclk), .aresetn(aresetn), .m_axis_data_tdata(dds_m_data_tdata), .m_axis_data_tready(fft_s_data_tready), .m_axis_data_tvalid(dds_m_data_tvalid) ); //FFT core wire [7:0] fft_s_config_tdata;//[0:0]FWD_INV_0 wire fft_s_config_tready; wire fft_s_config_tvalid; wire [7:0] fft_m_status_tdata; wire fft_m_status_tready; wire fft_m_status_tvalid; wire [15:0] fft_m_data_tdata; wire fft_m_data_tlast; wire ifft_s_data_tready; wire [23:0] fft_m_data_tuser;//[11:0]XK_INDEX wire fft_m_data_tvalid; wire fft_event_frame_started; wire fft_event_tlast_unexpected; wire fft_event_tlast_missing; wire fft_event_status_channel_halt; wire fft_event_data_in_channel_halt; wire fft_event_data_out_channel_halt; wire [11:0] xk_index; assign xk_index = fft_m_data_tuser[11:0]; assign fft_s_config_tdata = 8'd1;//定义FFT模块配置信息(第0位为1表示用FFT,为0表示用IFFT) assign fft_s_config_tvalid = 1'd1;//FFT模块配置使能,从一开始就拉高,表示已经准备好要传入的配置数据了 xfft_0 usr_fft( .aclk(aclk),//Rising-edge clock .aresetn(aresetn),//(低有效)Active-Low synchronous clear (optional, always take priority over aclken); A minimum aresetn active pulse of two cycles is required //S_AXIS_DATA .s_axis_data_tdata(dds_m_data_tdata),//IN Carries the unprocessed sample data: XN_RE and XN_IM .s_axis_data_tlast(dds_m_data_tlast),//IN Asserted by the external master on the last sample of the frame .s_axis_data_tready(fft_s_data_tready),//OUT Used by the core to signal that it is ready to accept data .s_axis_data_tvalid(dds_m_data_tvalid),//IN Used by the external master to signal that it is able to provide data //S_AXIS_CONFIG .s_axis_config_tdata(fft_s_config_tdata),//IN Carries the configuration information .s_axis_config_tready(fft_s_config_tready),//OUT Asserted by the core to signal that it is ready to accept data .s_axis_config_tvalid(fft_s_config_tvalid),//IN Asserted by the external master to signal that it is able to provide data //M_AXIS_STATUS .m_axis_status_tdata(fft_m_status_tdata), .m_axis_status_tready(fft_m_status_tready), .m_axis_status_tvalid(fft_m_status_tvalid), //M_AXIS_DATA .m_axis_data_tdata(fft_m_data_tdata),//OUT Carries the processed sample data XK_RE and XK_IM .m_axis_data_tlast(fft_m_data_tlast),//OUT Asserted by the core on the last sample of the frame .m_axis_data_tready(ifft_s_data_tready),//IN Asserted by the external slave to signal that it is ready to accept data. Only present in Non-Realtime mode .m_axis_data_tuser(fft_m_data_tuser),//OUT Carries additional per-sample information: XK_INDEX, OVFLO and BLK_EXP .m_axis_data_tvalid(fft_m_data_tvalid),//OUT Asserted by the core to signal that it is able to provide status data //EVENTS .event_frame_started(fft_event_frame_started),//Asserted when the core starts to process a new frame .event_tlast_unexpected(fft_event_tlast_unexpected),//Asserted when the core sees s_axis_data_tlast High on a data sample that is not the last one in a frame .event_tlast_missing(fft_event_tlast_missing),//Asserted when s_axis_data_tlast is Low on the last data sample of a frame .event_status_channel_halt(fft_event_status_channel_halt),//Asserted when the core tries to write data to the Status channel and it is unable to do so .event_data_in_channel_halt(fft_event_data_in_channel_halt),//Asserted when the core requests data from the Data Input channel and none is available .event_data_out_channel_halt(fft_event_data_out_channel_halt)//Asserted when the core tries to write data to the Data Output channel and it is unable to do so ); //IFFT core wire [7:0] ifft_s_config_tdata;//[0:0]FWD_INV_0 wire ifft_s_config_tready; wire ifft_s_config_tvalid; wire [7:0] ifft_m_status_tdata; wire ifft_m_status_tready; wire ifft_m_status_tvalid; wire [15:0] ifft_m_data_tdata; wire ifft_m_data_tlast; wire ifft_m_data_tready; wire [23:0] ifft_m_data_tuser;//[11:0]XK_INDEX wire ifft_m_data_tvalid; wire ifft_event_frame_started; wire ifft_event_tlast_unexpected; wire ifft_event_tlast_missing; wire ifft_event_status_channel_halt; wire ifft_event_data_in_channel_halt; wire ifft_event_data_out_channel_halt; wire [11:0] ixk_index; assign ixk_index = ifft_m_data_tuser[11:0]; assign ifft_s_config_tdata = 8'd0;//定义FFT模块配置信息(第0位为1表示用FFT) assign ifft_s_config_tvalid = 1'd1;//FFT模块配置使能,从一开始就拉高,表示已经准备好要传入的配置数据了 assign ifft_m_data_tready = 1'd1;//从一开始就拉高,表示已经准备好接收IFFT模块输出的数据 xfft_0 usr_ifft( .aclk(aclk),//Rising-edge clock .aresetn(aresetn),//(低有效)Active-Low synchronous clear (optional, always take priority over aclken); A minimum aresetn active pulse of two cycles is required //S_AXIS_DATA .s_axis_data_tdata(fft_m_data_tdata),//IN Carries the unprocessed sample data: XN_RE and XN_IM .s_axis_data_tlast(fft_m_data_tlast),//IN Asserted by the external master on the last sample of the frame .s_axis_data_tready(ifft_s_data_tready),//OUT Used by the core to signal that it is ready to accept data .s_axis_data_tvalid(fft_m_data_tvalid),//IN Used by the external master to signal that it is able to provide data //S_AXIS_CONFIG .s_axis_config_tdata(ifft_s_config_tdata),//IN Carries the configuration information .s_axis_config_tready(ifft_s_config_tready),//OUT Asserted by the core to signal that it is ready to accept data .s_axis_config_tvalid(ifft_s_config_tvalid),//IN Asserted by the external master to signal that it is able to provide data //M_AXIS_STATUS .m_axis_status_tdata(ifft_m_status_tdata), .m_axis_status_tready(ifft_m_status_tready), .m_axis_status_tvalid(ifft_m_status_tvalid), //M_AXIS_DATA .m_axis_data_tdata(ifft_m_data_tdata),//OUT Carries the processed sample data XK_RE and XK_IM .m_axis_data_tlast(ifft_m_data_tlast),//OUT Asserted by the core on the last sample of the frame .m_axis_data_tready(ifft_m_data_tready),//IN Asserted by the external slave to signal that it is ready to accept data. Only present in Non-Realtime mode .m_axis_data_tuser(ifft_m_data_tuser),//OUT Carries additional per-sample information: XK_INDEX, OVFLO and BLK_EXP .m_axis_data_tvalid(ifft_m_data_tvalid),//OUT Asserted by the core to signal that it is able to provide status data //EVENTS .event_frame_started(ifft_event_frame_started),//Asserted when the core starts to process a new frame .event_tlast_unexpected(ifft_event_tlast_unexpected),//Asserted when the core sees s_axis_data_tlast High on a data sample that is not the last one in a frame .event_tlast_missing(ifft_event_tlast_missing),//Asserted when s_axis_data_tlast is Low on the last data sample of a frame .event_status_channel_halt(ifft_event_status_channel_halt),//Asserted when the core tries to write data to the Status channel and it is unable to do so .event_data_in_channel_halt(ifft_event_data_in_channel_halt),//Asserted when the core requests data from the Data Input channel and none is available .event_data_out_channel_halt(ifft_event_data_out_channel_halt)//Asserted when the core tries to write data to the Data Output channel and it is unable to do so ); //将FFT/IFFT处理完的信号传出(虚部/实部分别传出) assign fft_real = fft_m_data_tdata[7:0]; assign fft_imag = fft_m_data_tdata[15:8]; assign ifft_real = ifft_m_data_tdata[7:0]; assign ifft_imag = ifft_m_data_tdata[15:8]; endmodule 2.仿真文件fft_tb.v与上面步骤类似,不过在下面该步骤时,选择Add or create simulation sources 在运行仿真之前需要设置仿真时间,在下图SIMULATION处右击,进入Simulation Settings 仿真之后只会显示仿真文件中的信号,结果分析需要查看内部模块的信号。在下图中,单击fft_test即可看到内部信号,将未显示的信号选中右击,选择Add to Wave Window,这些信号即可添加进仿真波形图中。 找到dds_m_data_tdata,fft_m_data_tdata,ifft_m_data_tdata信号,分别进行如下设置。 选中信号,右击,找到Waveform Style,选择Analog。 DDS产生波形,周期为100ns,即频率为10MHz。复位信号至少拉低两个时钟周期。 |
CopyRight 2018-2019 实验室设备网 版权所有 |