minisforum

You need to prepare:USB flash drive (FAT32 formatted),Step:1. Unzip all the files in the ZIP archive to the USB disk,2. Insert the USB disk into the PC, then press [F7] to select the UEFI:USB disk to boot,3. Enter[fs0:] after entering the shell page,enter the root directory of the U disk, and then enter [dir]to list the files in this directory, and confirm that it is correct;if not [fs0:],try [fs1-2-3:]...and so on, depending on how many hard drives you have,4. Enter [type EfiFlash.nsh] to view the nsh file command, then enter [AfuEfix64.efi ... ],Then press Enter, start writing, do not power off! Just wait for it to restart naturally.

工具：U盘（FAT32格式）1个;1.把ZIP压缩包的所有文件解压至U盘根目录，如下图：

2.将U盘插到主机上，然后开机按F7选择U盘启动3.进入shell页面后，输入fs0：进入到U盘根目录 ，再输入dir列出此目录下文件，确认没错；不是fs0：就是fs1-2-3:，根据您的硬盘数量类推4.输入type EfiFlash.nsh查看nsh文件命令，然后照着敲出上方弹出的代码即可[AfuEfix64.efi ……]然后回车，就开始刷了，过程中不要断电！等它自然重启就 OK。