OPPO Reno4 Pro 5G

NOTES

1. Due to slight variations in device components and measurement methods, device thickness may differ by ±0.2mm and device weight may differ by ±3g compared to specifications.

2. Reno4 Pro 5G(Galactic Blue) and Reno4 Pro 5G(Green Glitter) uses the Reno Glow process. The final effect may vary between phones in color and details. Please refer to the actual product.

3. In 120° Ultra-Wide Angle mode, the corrected angle of view is 101° (with a 16:9 aspect ratio).

4. The telephoto lens uses a 13MP sensor, and the actual shooting resolution can go up to 4160 x 3120.

5. Qualcomm Snapdragon™ 765G supports both SA and NSA 5G modes. Considering the actual construction progress of 5G network infrastructure by some countries, regions, or carriers, SA mode might be unavailable on OPPO Reno4 5G series.

6. Data provided by Qualcomm. It may vary depending on factors such as 5G network signals and carrier policies.

7. Based on tests performed at OPPO labs. The actual charging time may vary depending on differences in environments or individual devices (such as temperature variations and battery age).

8. Data provided by TÜV Rheinland. The actual duration may vary depending on the specific conditions under which you use your phone.

9. OPPO Reno4 Pro 5G uses two 2000mAh batteries in series, equivalent to 4000mAh, and supports high-current SuperVOOC Flash Charge. The batteries have been specially encrypted for safety purposes. Using a non-genuine battery will result in usage issues, including but not limited to slow charging. To repair your battery or to get a genuine replacement battery, please go to an official OPPO service center.

10. Based on tests performed at OPPO labs. The displayed remaining battery power may vary from device to device. To ensure accuracy in testing, "5% battery" is defined as the equivalent of 5% of a 4000mAh battery, i.e., 200mAh.

11. 6.5 inches is the diagonal length when the four rounded corners of the screen are extended into right angles the actual size is smaller.

12. By default, the screen refresh rate is set to "Auto select", in which the refresh rate changes automatically depending on the usage scenario. You can also set it to "90Hz" or "60Hz" in "Settings".

13. When you use the 90Hz refresh rate, the 180Hz touch sampling rate is available only in some scenarios. The 120Hz touch sampling rate is used in other scenarios.

14. Based on tests performed at OPPO labs. The actual loading time may vary depending on differences in environments or individual devices.

15. Product pictures are for reference only. Some specifications and descriptions of this product may vary due to changes in suppliers. Please refer to the actual product. All data mentioned above is based on the technical design parameters of OPPO as well as test data from its labs and suppliers. The actual data may differ slightly depending on the OS version used for testing and the testing environment.