详细步骤:SCI等论文投稿,修改图片格式visio | 您所在的位置:网站首页 › ps如何导出矢量图图片并保存 › 详细步骤:SCI等论文投稿,修改图片格式visio |
读研一年半了,投过了好多期刊,修改图片格式着实令人头疼,最近痛定思痛,打算一定搞懂。今天就来介绍一下不使用ps情况下,图片格式的修改。 投稿分为word和latex版的,一般word用png或者pdf,latex用pdf或者eps。今天就来介绍一下,如何使用visio画的图导出符合期刊要求的eps。因为在visio导出为eps的过程中,需要png和pdf作为过渡。所以,学会了visio转eps,也就学会了转png和pdf,就可以应用于绝大多数的投稿过程中。 1.visio画图可以用visio直接画,也可以把matlab、python、excel等画的图复制到visio中。 2.visio导出png点击:设计、大小、适应绘图。这样纸张大小就和图片一样大了。 点击:文件、另存为。保存类型选择可移植网络图形。点击保存。 根据期刊格式要求调整保存要求,分辨率一般调整为600x600,矢量图1200x1200。 一般单栏图片的宽度不超过84mm,双栏图片宽度不超过174mm。高度要求不太一样,差不多一般都没问题。 3.png生成pdf右键点击png,选择转换为Adobe PDF。 当然,要提前下载这个东西,很多博客都有介绍,这里不再冗余介绍。 4.pdf生成eps用adobe acrobat打开pdf 点击:文件、导出到、postscript。 格式选择eps 这样就导出eps了,导出效果: 怎么纸张这么大?没关系的。因为一般是latex使用eps,所以使用的时候,会自动调整好的。 放大之后,图片的清晰度也没有问题。 顺便分享一下,latex插入eps的方法: % For one-column wide figures use \begin{figure} % Use the relevant command to insert your figure file. % For example, with the graphicx package use \includegraphics{example.eps} % figure caption is below the figure \caption{Please write your figure caption here} \label{fig:1} % Give a unique label \end{figure} % % For two-column wide figures use \begin{figure*} % Use the relevant command to insert your figure file. % For example, with the graphicx package use \includegraphics[width=0.75\textwidth]{example.eps} % figure caption is below the figure \caption{Please write your figure caption here} \label{fig:2} % Give a unique label \end{figure*}如果有说的不对的,或者有更简单的办法,欢迎大佬们在评论区指正!!! 完 欢迎讨论 欢迎吐槽 |
CopyRight 2018-2019 实验室设备网 版权所有 |