|
概要・特点
机能・规格
订购信息・选件
技术支持・下载
概要・特点
This product is PCI-compliant interface boards that convert analog input signals to digital equivalents (performing analog-to-digital conversion). This product can perform A-D conversion at a conversion speed of 10µsec[100KSPS] per channel and a resolution of 12bit. Windows/Linux driver is supported with this product.
Multi-channel analog input
This product can perform an analog input of single-ended input 16 channels and differential input 8 channels.
Selection of single-ended input and differential input can be set up by the software.
Input range setup by software
Input range can be selected for each channel from the following ranges and can be set up by the software.
±10V, ±5V, ±2.5V, ±1.25V, 0 - +10V, 0 - +5V, 0 - +2.5V, 0 - +1.25V
Sampling control function
This product can perform sampling either at arbitrary timings under control of software or periodically in synchronization with a sampling clock signal.
The sampling clock signal can be selected between the internal one based on the on-board clock generator and the external one using a digital signal input from an external source.
Mixed on-board channels for analog output and digital I/O
This product has four digital input and four digital output pins for TTL level signals, allowing an external device to be monitored and controlled.
Optional units
Using optional units facilitates connections. For more details on the option, please refer to “Cable & Connector” or “Accessories (Option)”.
Windows/Linux compatible driver libraries are supported.
Using the digital I/O driver makes it possible to create applications of Windows/Linux. In addition, a diagnostic program by which the operations of hardware can be checked is provided.
|