| 非华为机型如何体验HarmonyOS鸿蒙系统 刷写HarmonyOS鸿蒙GSI系统以及一些初步的bug修复 | 您所在的位置：网站首页 › oppo手机怎样更新鸿蒙系统 › 非华为机型如何体验HarmonyOS鸿蒙系统 刷写HarmonyOS鸿蒙GSI系统以及一些初步的bug修复 |
非华为机型如何体验HarmonyOS鸿蒙系统 刷写HarmonyOS鸿蒙GSI系统以及一些初步的bug修复
|
最近很多视频网站有非华为机型使用HarmonyOS鸿蒙系统的演示。其实大都是刷了HarmonyOS鸿蒙系统gsi系统。体验还可以。有些刷入后bug较多。那么这些机型是如何刷写gsi？可以参考我以往帖子 安卓玩机搞机-----没有第三方包 刷写第三方各种GSI系统 体验非官方系统_gsi刷机包_安卓机器的博客-CSDN博客 安卓玩机搞机----移植第三方rom修复 第三方GSI系统修复bug综合解析【一】_移植rom修复nfc_安卓机器的博客-CSDN博客 HarmonyOS鸿蒙系统的gsi已经更新到我的资源。点击：gsi资源，需要的友友可以下载。也可以自行到网络搜索下载体验 简单的描述一下步骤;gsi镜像为一个system.img文件。扩容系统分区后把这个镜像刷入到系统分区即可。有的机型直接就开机了，有的需要去各种加密等等方式才可以开机 💔💔💔💔💔💔💔💔刷写HarmonyOS鸿蒙系统GSI的基本步骤💔💔💔💔💔💔💔💔
因为HarmonyOS鸿蒙系统GSI占用的系统分区较大。大都在7----8G左右。这就面临着你如果想刷入这些gsi系统就需要扩容系统分区。否则你刷写不进去。至于怎么扩容，可以找你自己机型的扩容补丁或者手动扩容，可以参考： 再次提示。任何的修改分区操作都有可能导致手机不开机或者彻底黑屏故障。请谨慎操作。刷入gsi系统后如果机型还不开机。如果你的系统分区有vbmeta。你可以尝试关闭avb校验 fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img另外也要考虑你机型底包的原因。建议最好最新的官方系统下尝试刷写gsi 底包说明：底包说明解析 另外。目前有好几个版本的HarmonyOS鸿蒙系统GSI系统，具体需要自测。 #################################################################### 💔💔💔💔💔💔💔💔修复HarmonyOS鸿蒙系统GSI系统的一些bug操作💔💔💔💔💔💔💔💔 刷入卡第一屏：可以在boot宽容。avb验证。data加密。boot版本 。底包方面逐一排查。尝试把vendor/overlay里面的文件全部删除测试 出现HarmonyOS动画 重启到rec：进rec删除system/priv-app/HwStartGuide 关于手机界面修复：添加以下代码：# Harmony OS版本 ro.build.hide.matchers=4.0.0 ro.build.hide.replacements=4.0.0 hw_sc.build.platform.version=4.0.0 # 软件版本 ro.build.display.id=FOA-AL00 4.0.0.112(C00E112R3P2) ro.build.ver.physical=FOA-AL00 4.0.0.112(C00E112R3P2) ro.huawei.build.display.id=FOA-AL00 4.0.0.112(C00E112R3P2) # 处理器型号 ro.config.cpu_info_display=高通骁龙™ 712 （这里可以改成你自己的处理器） # GPU Turbo（图标作用） ro.gpu_turbo=GPU Turbo # 修复高刷 sys.aps.defaultmaxfps=120 开机动画修复：将根目录/hw_product/region_comm/china/media/ 里面的三个文件，复制到system/media HUAWEI/HarmonyOS开机动画和铃声就有了 鸿蒙gsi开机默认英文： 修改system/build.prop：将en修改为zh-CN 桌面名称修复：将hw_product里面的etc所以文件及文件夹和lib/lib64文件夹补到system对应etc文件夹和lib文件夹，注意，有相同的请跳过，不然容易不开机 热点修复;提取原rom包vendor里面的以下驱动换即可 vendor/bin/cnd vendor/bin/hostapd_cli vendor/bin/hw/hostapd vendor/etc/hostapd vendor/etc/init/hostapd.android.rc vendor/lib/libqsap_sdk.so vendor/lib/vendor.qti.hardware.wifi.hostapd.so vendor/lib64/libqsap_sdk.so vendor/lib64/vendor.qti.hardware.wifi.hostapd.so
目前最新的HarmonyOS鸿蒙系统GSI的build.prop。 #################################### # from generate-common-build-props # These properties identify this partition image. #################################### ro.product.system.brand=Redmi ro.product.system.device= ro.product.system.manufacturer=Xiaomi ro.product.system.model= ro.product.system.name= ro.system.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi ro.system.product.cpu.abilist32=armeabi-v7a,armeabi ro.system.product.cpu.abilist64=arm64-v8a ro.system.build.date=Sat Aug 12 10:22:32 CST 2023 ro.system.build.date.utc=1691806952 ro.system.build.fingerprint=Huawei/ohosqssi/ohosqssi:12/SKQ1.220804.001/huawei08121022:user/dev-keys ro.system.build.id=SKQ1.220804.001 ro.system.build.tags=dev-keys ro.system.build.type=user ro.system.build.version.incremental=eng.huawei.20230812.101427 ro.system.build.version.release=12 ro.system.build.version.release_or_codename=12 ro.system.build.version.sdk=31 #################################### # from out/target/product/ohosqssi/obj/PACKAGING/system_build_prop_intermediates/buildinfo.prop #################################### # begin build properties # autogenerated by buildinfo.sh ro.build.id=SKQ1.220804.001 ro.build.keys=dev-keys ro.build.version.sdk=31 ro.build.ark3.version=0.0.0.2 ro.build.ark3.min.version=0.0.0.2 ro.build.version.preview_sdk=0 ro.build.version.preview_sdk_fingerprint=REL ro.build.version.codename=REL ro.build.version.all_codenames=REL ro.build.version.release=12 ro.build.version.release_or_codename=12 ro.build.version.security_patch=2023-08-01 ro.build.version.base_os= config.disable_consumerir=true ro.build.version.security_patch=2023-08-01 ro.huawei.build.version.security_patch=2023-08-01 ro.build.version.min_supported_target_sdk=23 ro.build.date=Sat Aug 12 10:22:32 CST 2023 ro.huawei.build.date=Sat Aug 12 10:22:32 CST 2023 ro.build.date.utc=1691806952 ro.huawei.build.date.utc=1691806952 ro.build.type=user ro.build.host=cn-central-hcd-2a-16e33f4d21691804757398-7f79fc5959-gddn7 ro.huawei.build.host=cn-central-hcd-2a-16e33f4d21691804757398-7f79fc5959-gddn7 ro.build.flavor=ohosqssi-user # ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete, # use ro.product.cpu.abilist instead. ro.product.cpu.abi=arm64-v8a ro.product.locale=zh-CN ro.wifi.channels= ro.board.platform= ro.build.product=ohosqssi # Do not try to parse description or thumbprint ro.build.description=ohosqssi-user 12 SKQ1.220804.001 eng.huawei.20230812.101427 dev-keys # end build properties #################################### # from zidane/build/product/generic_phone.prop #################################### # whether ohos is enabled. hw_sc.build.os.enable=true # ohos API version number. hw_sc.build.os.apiversion=8 # ohos API release type. hw_sc.build.os.apireleasetype=Release # ohos system version. hw_sc.build.os.version=4.0.0 # ohos device type please use hw_sc.build.os.devicetype # ohos release type. hw_sc.build.os.releasetype=Release #################################### # from device/qcom/qssi/system.prop #################################### # # system.prop for qssi # rild.libpath=/vendor/lib64/libril-qc-hal-qmi.so #rild.libargs=-d /dev/smd0 persist.rild.nitz_plmn= persist.rild.nitz_long_ons_0= persist.rild.nitz_long_ons_1= persist.rild.nitz_long_ons_2= persist.rild.nitz_long_ons_3= persist.rild.nitz_short_ons_0= persist.rild.nitz_short_ons_1= persist.rild.nitz_short_ons_2= persist.rild.nitz_short_ons_3= ril.subscription.types=NV,RUIM DEVICE_PROVISIONED=1 # Set network mode to (NR_LTE_TDSCDMA_CDMA_EVDO_GSM_WCDMA, NR_LTE_TDSCDMA_CDMA_EVDO_GSM_WCDMA) for 8+8 mode device on DSDS mode ro.telephony.default_network=33,33 dalvik.vm.heapsize=36m dalvik.vm.dex2oat64.enabled=true dev.pm.dyn_samplingrate=1 #ro.hdmi.enable=true #persist.speaker.prot.enable=false qcom.hw.aac.encoder=true # # system props for the cne module # persist.vendor.cne.feature=1 #system props for the MM modules media.stagefright.enable-player=true media.stagefright.enable-http=true media.stagefright.enable-aac=true media.stagefright.enable-qcp=true media.stagefright.enable-fma2dp=true media.stagefright.enable-scan=true media.stagefright.thumbnail.prefer_hw_codecs=true mmp.enable.3g2=true media.aac_51_output_enabled=true #16777215 is decimal sum of supported codecs in AAL #codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD MOV MHAS vendor.mm.enable.qcom_parser=16777215 persist.mm.enable.prefetch=true # # system props for the data modules # ro.vendor.use_data_netmgrd=true persist.vendor.data.mode=concurrent #system props for time-services persist.timed.enable=true # # system prop for opengles version # # 196608 is decimal for 0x30000 to report version 3 # 196609 is decimal for 0x30001 to report version 3.1 # 196610 is decimal for 0x30002 to report version 3.2 # # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1 #Simulate sdcard on /data/media # persist.fuse_sdcard=true #System props for BT ro.bluetooth.library_name=libbluetooth_qti.so persist.vendor.btstack.aac_frm_ctl.enabled=true #system prop for RmNet Data persist.rmnet.data.enable=true persist.data.wda.enable=true persist.data.df.dl_mode=5 persist.data.df.ul_mode=5 persist.data.df.agg.dl_pkt=10 persist.data.df.agg.dl_size=4096 persist.data.df.mux_count=8 persist.data.df.iwlan_mux=9 persist.data.df.dev_name=rmnet_usb0 #property to enable user to access Google WFD settings persist.debug.wfd.enable=1 ##property to choose between virtual/external wfd display persist.sys.wfd.virtual=0 #property to latch unsignaled buffer # enable tunnel encoding for amrwb tunnel.audio.encode=true #enable voice path for PCM VoIP by default use.voice.path.for.pcm.voip=true # system prop for NFC DT ro.nfc.port=I2C #initialize QCA1530 detection sys.qca1530=detect #Enable stm events persist.debug.coresight.config=stm-events #hwui properties ro.hwui.texture_cache_size=72 ro.hwui.layer_cache_size=48 ro.hwui.r_buffer_cache_size=8 ro.hwui.path_cache_size=32 ro.hwui.gradient_cache_size=1 ro.hwui.drop_shadow_cache_size=6 ro.hwui.texture_cache_flushrate=0.4 ro.hwui.text_small_cache_width=1024 ro.hwui.text_small_cache_height=1024 ro.hwui.text_large_cache_width=2048 ro.hwui.text_large_cache_height=1024 config.disable_rtt=true #Bringup properties persist.sys.force_sw_gles=1 persist.vendor.radio.atfwd.start=true ro.kernel.qemu.gles=0 qemu.hw.mainkeys=0 #Expose aux camera for below packages #Add snapcam in privapp list #enable IZat OptInApp overlay persist.vendor.overlay.izat.optin=rro # Property for backup NTP Server persist.backup.ntpServer="0.pool.ntp.org" #Property to enable Mag filter persist.vendor.sensors.enable.mag_filter=true #Partition source order for Product/Build properties pickup. #Property to enable Codec2 for audio and OMX for Video debug.stagefright.ccodec=1 #Property to set native recorder's maximum base layer fps ro.media.recorder-max-base-layer-fps=60 #Battery Property ro.charger.enable_suspend=1 #Disable MTE Async for system server arm64.memtag.process.system_server=off # Disable blur on app launch ro.launcher.blur.appLaunch=0 #################################### # from variable ADDITIONAL_SYSTEM_PROPERTIES #################################### # Removed by post_process_props.py because ro.product.first_api_level is a disallowed key #ro.product.first_api_level=31 ro.maple.enable=0 ro.postinstall.fstab.prefix=/system persist.sys.dalvik.vm.lib.2=libart.so dalvik.vm.isa.arm64.variant=generic dalvik.vm.isa.arm64.features=default dalvik.vm.isa.arm.variant=cortex-a9 dalvik.vm.isa.arm.features=default ro.secure=0 security.perf_harden=0 ro.adb.secure=0 ro.allow.mock.location=0 ro.debuggable=1 net.bt.name=Android ro.vendor.qti.va_aosp.support=1 #################################### # from variable PRODUCT_SYSTEM_PROPERTIES #################################### debug.atrace.tags.enableflags=0 dalvik.vm.image-dex2oat-Xms=64m dalvik.vm.image-dex2oat-Xmx=64m dalvik.vm.dex2oat-Xms=64m dalvik.vm.dex2oat-Xmx=512m dalvik.vm.usejit=true dalvik.vm.usejitprofiles=true dalvik.vm.dexopt.secondary=true dalvik.vm.dexopt.thermal-cutoff=2 dalvik.vm.appimageformat=lz4 ro.magic.api.version=0.1 ro.dalvik.vm.native.bridge=0 pm.dexopt.first-boot=verify pm.dexopt.boot-after-ota=verify pm.dexopt.post-boot=extract pm.dexopt.install=speed-profile pm.dexopt.install-fast=skip pm.dexopt.install-bulk=speed-profile pm.dexopt.install-bulk-secondary=verify pm.dexopt.install-bulk-downgraded=verify pm.dexopt.install-bulk-secondary-downgraded=extract pm.dexopt.bg-dexopt=speed-profile # Removed by post_process_props.py because overridden by pm.dexopt.ab-ota=speed-profile #pm.dexopt.ab-ota?=speed-profile pm.dexopt.inactive=verify pm.dexopt.cmdline=verify pm.dexopt.shared=speed dalvik.vm.appimageformat=lz4 ro.magic.api.version=0.1 pm.dexopt.ab-ota=speed-profile dalvik.vm.dex2oat-updatable-bcp-packages-file=/system/etc/updatable-bcp-packages.txt dalvik.vm.dex2oat-resolve-startup-strings=true dalvik.vm.dex2oat-max-image-block-size=524288 dalvik.vm.minidebuginfo=true dalvik.vm.dex2oat-minidebuginfo=true ro.iorapd.enable=false dalvik.vm.madvise.vdexfile.size=0 dalvik.vm.madvise.odexfile.size=0 dalvik.vm.madvise.artfile.size=0 persist.device_config.runtime_native_boot.iorap_perfetto_enable=true #################################### # from variable PRODUCT_SYSTEM_DEFAULT_PROPERTIES #################################### # Auto-added by post_process_props.py persist.sys.usb.config=manufacture,adb # end of file ro.build.user=test ro.build.tags=release-keys ro.config.hw_navigationbar=true ro.build.display.id=FOA-AL00 4.0.0.112(C00E112R3P2) ro.comp.sys_support_vndk= const.persist.dex2oat.versionNum=ce5d10ce8831a79661e4133c9158b121aebbd3cc574ee1f8fd0a25adae25ae7f # BY Nippon ro.build.system_root_image=true ro.cp_system_other_odex=0 ro.nnapi.extensions.deny_on_product=true ro.support_one_handed_mode=true persist.sys.binary_xml=false # Some devices have sdcardfs kernel panicing on 8.0 # Disable for everyone for the moment ro.sys.sdcardfs=0 # Force triple frame buffers # ro.surface_flinger.max_frame_buffer_acquired_buffers=3 # Fix developer settings ro.oem_unlock_supported=1 # BT Fix persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac persist.bluetooth.a2dp_offload.disabled=false persist.vendor.qcom.bluetooth.a2dp_offload_cap=sbc-aptx-aptxtws-aptxhd-aac-ldac persist.vendor.qcom.bluetooth.aac_vbr_ctl.enabled=false persist.vendor.qcom.bluetooth.enable.splita2dp=true persist.vendor.qcom.bluetooth.scram.enabled=true persist.vendor.qcom.bluetooth.soc=cherokee persist.vendor.qcom.bluetooth.twsp_state.enabled=false ro.bluetooth.a2dp_offload.supported=true ro.vendor.bluetooth.wipower=false vendor.qcom.bluetooth.soc=cherokee persist.bluetooth.bluetooth_audio_hal.disabled=false persist.bluetooth.bluetooth_audio_hal.enabled=true # SIM Fix ro.multisim.simslotcount=2 ro.vendor.multisim.simslotcount=2 persist.radio.multisim.config=dsds persist.vendor.radio.msimode=dsds # Logcat logd.logpersistd=logcatd logd.logpersistd.buffer=all logd.logpersistd.enable=true logd.logpersistd.size=1024 logd.logpersistd.size.rotate=64 # You can nuke this if necessary ro.opengles.version=196610 telephony.lteOnCdmaDevice=1 ro.product.property_source_order=system,product,system_ext,vendor,odm sys.aps.defaultmaxfps=60 ro.build.hide.matchers=4.0.0 ro.build.hide.replacements=4.0.0 hw_sc.build.platform.version=4.0.0 ro.gpu_turbo=GPU Turbo其他的bug修复。需要你对照原机官方系统和华为原版鸿蒙系统进行修复。具体可以参考前面的博文.对于每个系统，评价不同。其实自己体验好的才是最好的 |
【本文地址】
公司简介
联系我们