Linux/Unix命令之Ethtool (设置千兆网卡速度及模式) | 您所在的位置:网站首页 › linux系统修改网卡速率修改不了怎么办 › Linux/Unix命令之Ethtool (设置千兆网卡速度及模式) |
描述:
Ethtool是用于查询及设置网卡参数的命令。 概要: ethtool ethX //查询ethX网口基本设置 ethtool –h //显示ethtool的命令帮助(help) ethtool –i ethX //查询ethX网口的相关信息 ethtool –d ethX //查询ethX网口注册性信息 ethtool –r ethX //重置ethX网口到自适应模式 ethtool –S ethX //查询ethX网口收发包统计 ethtool –s ethX [speed 10|100|1000]/ //设置网口速率10/100/1000M [duplex half|full]/ //设置网口半/全双工 [autoneg on|off]/ //设置网口是否自协商 [port tp|aui|bnc|mii]/ //设置网口类型 [phyad N]/ [xcvr internal|exteral]/ [wol p|u|m|b|a|g|s|d...]/ [sopass xx:yy:zz:aa:bb:cc]/ [msglvl N] 举例: 1)[root@linux /]# ethtool eth1 Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: umbg Wake-on: d Link detected: yes 2)[root@linux /]# ethtool -i eth1 driver: e1000 version: 5.0.43-k1 firmware-version: N/A bus-info: 06:08.1 3)[root@linux /]# ethtool -S eth1 NIC statistics: rx_packets: 58068300 tx_packets: 87124083 rx_bytes: 1589713008 tx_bytes: 2165825901 rx_errors: 0 tx_errors: 0 rx_dropped: 0 tx_dropped: 0 multicast: 0 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_fifo_errors: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 4)[root@linux /]# ethtool -s eth1 autoneg off speed 100 duplex full 相关: 1)[root@linux /]# which ethtool /sbin/ethtool 2)[root@linux /]# rpm -qf /sbin/ethtool ethtool-1.6-5 3)怎样使ethtool设置永久保存在网络设备中? 解决方法一: ethtool设置可通过/etc/sysconfig/network-scripts/ifcfg-ethX文件保存,从而在设备下次启动时激活选项。 例如:ethtool -s eth0 speed 100 duplex full autoneg off 此指令将eth0设备设置为全双工自适应,速度为100Mbs。若要eth0启动时设置这些参数, 修改文件/etc/sysconfig/network-scripts/ifcfg-eth0 ,添加如下一行: ETHTOOL_OPTS="speed 100 duplex full autoneg off" 解决方法二: 将ethtool设置写入/etc/rc.d/rc.local之中。 文章出处:http://www.diybl.com/course/6_system/linux/Linuxjs/2008619/126834.html |
今日新闻 |
推荐新闻 |
专题文章 |
CopyRight 2018-2019 实验室设备网 版权所有 |