如何在AnyLogic中保存或导出变量的值 | 您所在的位置:网站首页 › anylogic怎么导出图 › 如何在AnyLogic中保存或导出变量的值 |
new_Screenshot Questions revised: In my model, I have 10000 "Persons" as a type of agents at "Main" level. As shown new_Screenshot, there is a process like the statechart. "variable1" is determined by the process. For example, Person 1 will have 10 for the value of "variable1" while Person 2 will have 100 through the process. My question is how to obtain the values (e.g. Person 1: 10, Person 2: 100,.....Person 10000: 10) in AnyLogic. Thank you. 上一个版本:我的模型有10000个“人”作为一种代理 . “人员”具有状态图和变量(屏幕截图中的“variable1”)从状态图中获取一组不同的值 . 我试图从变量中为所有10000“人”收集所有这些值 . 我怎样才能做到这一点?我曾尝试使用traceln但它没有用,因为我需要的是值而不是最小值,最大值,平均值等 . 谢谢! Screenshot |
CopyRight 2018-2019 实验室设备网 版权所有 |