Print 您所在的位置:网站首页 SONY镜头盖 Print

Print

2024-07-15 18:37| 来源: 网络整理| 查看: 265

When dust gets inside the lens of an interchangeable lens camera or fungus grows on the lens due to high humidity levels, it is not easy to remove. The following is an explanation of how to optimally store your interchangeable lens camera to prevent issues like fungal growth and dust contamination.

Pre-storage cleaning

Before storing cameras and lenses, it is recommended that you remove dust with a brush or blower and use a soft cloth to wipe off any dirt, fingerprints or grease.

For more information on how to clean lenses, refer to this article on How to clean dust, dirt, spots, marks or fingerprints from the front of the camera lens .

Storage containers

Storing cameras in a specially sealed dry box protects them from dust and humidity. Before you purchase such a container, it is recommended that you line up the cameras and lenses that you want to store to determine how large of a size you will need.

Dry boxes: A dry box is an airtight, watertight cabinet for storing cameras. Using a dry box lets you maintain a stable level of humidity at all times. There are many different types, including some that come with a backup plug, some that are lockable and some that electronically control humidity.

Electronic Dry box

Simple dry boxes: A simple dry box is an easy storage method that consists of an airtight plastic container inside which a desiccant is placed. Simple dry boxes are available in a variety of overall sizes, heights, widths, and depths. Choose one that is sized appropriately for the cameras or lenses that you want to store.

Dry boxes

Note: Observe the following when storing cameras and lenses. Camera body and lens: If you have a body cap and a lens rear cap, detach the lens before storage. If not, store the camera body with the lens attached. Body cap

Camera body without body cap - Camera body with body cap

Lens rear cap

Attach the lens rear cap

Battery pack: Remove the battery from the camera body before storage.Desiccant: When using a simple dry box, place a desiccant inside.Hygrometer: If using a dry box that does not come with a hygrometer, place a hygrometer inside so that you can control the humidity. An optimal humidity level is one between about 40% and 50%.


【本文地址】

公司简介

联系我们

今日新闻

    推荐新闻

    专题文章
      CopyRight 2018-2019 实验室设备网 版权所有