CentOS基础文件基本操作命令 | 您所在的位置:网站首页 › Linux查看所有文件夹 › CentOS基础文件基本操作命令 |
文件(夹)查看类命令 ls--显示指定目录下内容 说明:ls 显示结果以不同的颜色来区分文件类别。蓝色代表目录,灰色代表普通文件,绿色代表可执行文件,红色代表压缩文件,浅蓝色代表链接文件。 -a---显示所有内容,包括隐藏文件 说明:在Linux系统中,以“.”开头的就是隐藏文件或隐藏目录。 -l---以长格式(内容更详细)显示文件或目录的详细信息。 说明:ls -l命令可以简写成ll, 输出的信息共分为7组:文件类别和文件权限、链接数或子目录个数、文件所有者、文件所属组、文件大小(单位为字节B)、文件创建或修改时间、文件名。 文件类别:第一组前1位表示文件类别,“-”代表普通文件,“d”代表目录,“l”代表符号链接,“c”代表字符设备,“b”代表块设备文件权限:第一组后9位表示文件权限,前3位为user、中间3位为group、后三位为other的权限 -d---显示目录本身的属性而不是目录中的内容。 1 2 3 4 5 [root@localhost ~] # ls -ld /home drwxr-xr-x. 4 root root 4096 9月 22 10:41 /home [root@localhost ~] # ls -d /home /home [root@localhost ~] #-h---以K、M、G等单位显示文件大小(默认为字节) 1 2 3 4 5 6 7 [root@localhost ~] # ls -h /home justin lost+found [root@localhost ~] # ls -lh /home 总用量 20K drwx------. 27 justin justin 4.0K 9月 22 13:19 justin drwx------. 2 root root 16K 9月 18 15:30 lost+found [root@localhost ~] #-R---若目录下有档案,也将档案依序列出 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 [root@localhost ~] # ls -lR /home /home : 总用量 20 drwx------. 27 justin justin 4096 9月 22 13:19 justin drwx------. 2 root root 16384 9月 18 15:30 lost+found /home/justin : 总用量 32 drwxr-xr-x. 2 justin justin 4096 9月 22 10:49 公共的 drwxr-xr-x. 2 justin justin 4096 9月 22 10:49 模板 drwxr-xr-x. 2 justin justin 4096 9月 22 10:49 视频 drwxr-xr-x. 2 justin justin 4096 9月 22 10:49 图片 drwxr-xr-x. 2 justin justin 4096 9月 22 10:49 文档 drwxr-xr-x. 2 justin justin 4096 9月 22 10:49 下载 drwxr-xr-x. 2 justin justin 4096 9月 22 10:49 音乐 drwxr-xr-x. 2 justin justin 4096 9月 22 10:49 桌面 /home/justin/ 公共的: 总用量 0 /home/justin/ 模板: 总用量 0 /home/justin/ 视频: 总用量 0 /home/justin/ 图片: 总用量 0 /home/justin/ 文档: 总用量 0 /home/justin/ 下载: 总用量 0 /home/justin/ 音乐: 总用量 0 /home/justin/ 桌面: 总用量 0 /home/lost +found: 总用量 0 [root@localhost ~] #-t---将档案按照建立时间的先后次序列出 1 2 3 4 5 6 7 8 9 10 11 [root@localhost ~] # ls -l /home 总用量 20 drwx------. 27 justin justin 4096 9月 22 13:19 justin drwx------. 2 root root 16384 9月 18 15:30 lost+found -rw-r--r--. 1 root root 0 9月 22 15:21 t [root@localhost ~] # ls -lt /home 总用量 20 -rw-r--r--. 1 root root 0 9月 22 15:21 t drwx------. 27 justin justin 4096 9月 22 13:19 justin drwx------. 2 root root 16384 9月 18 15:30 lost+found [root@localhost ~] #说明:ls命令还可以结合通配符“?”或“*”一起使用,问号“?”可以匹配文件名中的一个任意字符,而“*”可以匹配文件名中的任意多个字符。这两个通配符同样也适用于Shell环境中的其他大多数命令。 1 2 3 4 5 6 7 8 9 10 11 12 gssapi_mech.conf popt.d xml gtk-2.0 portreserve yp.conf hal postfix yum host.conf ppp yum.conf hosts prelink.cache yum.repos.d hosts.allow prelink.conf hosts.deny prelink.conf.d [root@localhost etc] # ll -d /etc/po*.d drwxr-xr-x. 2 root root 4096 1月 11 2010 /etc/popt .d [root@localhost etc] # ll -d /etc/po?.d ls : 无法访问 /etc/po ?.d: 没有那个文件或目录 [root@localhost etc] #du---显示文件或目录大小 -h或--human-readable---以K,M,G为单位,提高信息的可读性 1 2 3 4 5 [root@localhost src] # du -h nagios-3.5.0.tar.gz 1.8M nagios-3.5.0. tar .gz [root@localhost src] # du nagios-3.5.0.tar.gz 1748 nagios-3.5.0. tar .gz [root@localhost src] #-a---显示全部目录和其次目录下的每个档案所占的磁盘空间 -b或-bytes---显示目录或文件大小时,以byte为单位 1 2 3 [root@localhost local ] # du -b src/nagios-3.5.0.tar.gz 1789376 src /nagios-3 .5.0. tar .gz [root@localhost local ] #-c或--total---显示每个目录或文件的大小外,同时也显示所有目录或文件的总和 -m或--megabytes---以1MB为单位-s---只显示各档案大小的总合 1 2 3 [root@localhost local ] # du -sh src/ 41M src/ [root@localhost local ] #-x---只计算同属同一个档案系统的档案 -L---计算所有的档案大小 df---显示档案系统的状况;主要用来了解系统中已经挂载的各个文件系统的磁盘使用情况 -h 显示更易读的容量单位-T 显示文件系统的类型 1 2 3 4 5 6 7 8 [root@localhost ~] # df -Th 文件系统 类型 容量 已用 可用 已用%% 挂载点 /dev/sda2ext4 9.9G 2.6G 6.9G 28% / tmpfs tmpfs 504M 112K 504M 1% /dev/shm /dev/sda1ext4 194M 27M 158M 15% /boot /dev/sda5ext4 7.7G 147M 7.2G 2% /home /dev/sr0iso9660 2.9G 2.9G 0 100% /media/RHEL_6 .3 i386 Disc 1 [root@localhost ~] #file---查看文件类型 1 2 3 4 5 6 [root@localhost home] # file justin/ justin/: directory [root@localhost home] # file justin1 justin1: empty [root@localhost ~] # file install.log install .log: UTF-8 Unicode text说明:file命令用于查看文件的类型,可以根据文件的内部存储结构来进行判别,而不根据文件的扩展名来进行判别。在Linux系统中,文件扩展名与文件类型没有绝对的关系。 创建文件名中可以带有空格,但需要用引号引起来,不建议使用空格 文件内容查看 cat---显示文件内容 1 [root@localhost log] # cat /var/log/messages说明:cat在显示文本文件的内容时不进行停顿,对于内容较长的文件,在快速滚屏显示之后,只有最后一页的文件内容保留在屏幕中显示,因此cat不适合查看长文件。 more---分页显示文件内容 -num--- 一次显示的行数 -s ---当遇到有连续两行以上的空白行,就代换为一行的空白行 +num ---从第 num 行开始显示 1 2 3 4 5 6 7 [root@localhost log] # more -5s /var/log/messages Sep 22 10:36:06 localhost kernel: imklog 5.8.10, log source = /proc/kmsg started. Sep 22 10:36:06 localhost rsyslogd: [origin software= "rsyslogd" swVersion= "5.8.10" x-pid = "1323" x-info= "http://www.rsyslog.com" ] start Sep 22 10:36:06 localhost kernel: Initializing cgroup subsys cpuset Sep 22 10:36:06 localhost kernel: Initializing cgroup subsys cpu --More--(0%)说明:类似 cat ,不过会以一页一页的显示方便使用者逐页阅读,空白键(space):显示下一页,b 键:显示上一页,q 键 :退出 less----分页显示文件内容 说 明:less命令的用法与more命令类似,它们之间的区别是当文件内容显示到文件尾时,more命令会自动退出阅读环境,而less命令不自动退出,用 户仍然可以利用上下键来卷动文件,这样更加有利于对文件内容的反复阅读。当要结束浏览时,要在less命令的提示符“:”后按Q键退出 head---查看文件开头部分的内容 -n 指定显示的具体行数。 1 2 3 4 5 6 7 [root@localhost ~] # head -5 /etc/passwd root:x:0:0:root: /root : /bin/bash bin:x:1:1:bin: /bin : /sbin/nologin daemon:x:2:2:daemon: /sbin : /sbin/nologin adm:x:3:4:adm: /var/adm : /sbin/nologin lp:x:4:7:lp: /var/spool/lpd : /sbin/nologin [root@localhost ~] #说明:默认情况下,head显示前10行内容 tail---查看文件末尾部分的内容 1 2 3 4 5 6 7 [root@localhost ~] # tail -5 /etc/passwd nfsnobody:x:65534:65534:Anonymous NFS User: /var/lib/nfs : /sbin/nologin abrt:x:173:173:: /etc/abrt : /sbin/nologin sshd:x:74:74:Privilege-separated SSH: /var/empty/sshd : /sbin/nologin tcpdump:x:72:72::/: /sbin/nologin justin:x:500:500:justin_peng: /home/justin : /bin/bash [root@localhost ~] #说明:tail命令用法与head命令类似 创建文件(夹)命令 touch---改变档案的时间记录,档案不存在则创建一个空文件,通常用来创建一个文件 1 2 3 4 [root@localhost home] # touch file1 file2 [root@localhost home] # ls file1 file2 justin lost+found t [root@localhost home] #-a 改变档案的读取时间记录。 -m 改变档案的修改时间记录。 -c 假如目的档案不存在,不会建立新的档 1 2 3 4 5 6 7 [root@justin touch ] # touch file{1..5} [root@justin touch ] # ls file1 file2 file3 file4 file5 [root@justin touch ] # touch file{6...9} [root@justin touch ] # ls file1 file2 file3 file4 file5 file {6...9} [root@justin touch ] #说明:在实际使用中经常用于创建新的测试文件。使用文件名作为参数,可以同时创建多个文件,切中间只能是两个点号。当目标文件已经存在时,将更新该文件的时间标记,否则将创建指定名称的空文件。 mkdir---Make Directory---创建新的目录 -p 确保目录名称存在,不存在的就建一个。 1 2 3 4 5 6 7 [root@localhost home] # ls justin lost+found t [root@localhost home] # mkdir dir1 [root@localhost home] # mkdir dir2/dir mkdir : 无法创建目录 "dir2/dir" : 没有那个文件或目录 [root@localhost home] # mkdir -p dir2/dir [root@localhost home] #同时创建多级目录 1 2 3 4 5 6 7 8 [root@localhost home] # ls justin lost+found t [root@localhost home] # mkdir -p {dir1,dir2/{dir3,dir4}} [root@localhost home] # ls dir1 dir2 justin lost+found t [root@localhost home] # ls dir2 dir3 dir4 [root@localhost home] #删除文件(夹)命令 rmdir---删除空目录(若目录非空删除中会报错) -p 当子目录被删除后也成为空目录的话,则顺便一并删除 1 2 3 4 5 6 7 8 9 10 [root@localhost home] # mkdir -p {dir1,dir2/dir3} [root@localhost home] # ls dir1 dir2 justin lost+found t [root@localhost home] # rmdir dir1 [root@localhost home] # rmdir dir2 rmdir : 删除 "dir2" 失败: 目录非空 [root@localhost home] # rmdir -p dir2/dir3/ [root@localhost home] # ls justin lost+found t [root@localhost home] #rm---删除档案或目录 文件的删除权限是由上级目录决定的,即使一个用户有该文件的删除权限,没有上次目录的写权限也是无法删除该文件 -i 删除前逐一询问确认。 -v 显示删除过程-f 即使原档案属性设为唯读,亦直接删除,无需逐一确认。 -r 将目录及以下档案也逐一删除。 1 2 3 4 5 6 [root@localhost home] # mkdir -p dir1/dir2 [root@localhost home] # rm -r dir1/ rm :是否进入目录 "dir1" ? y rm :是否删除目录 "dir1/dir2" ?y rm :是否删除目录 "dir1" ?y [root@localhost home] #Linux 删除除某个文件之外的所有文件 1 2 3 4 5 6 [root@APP rm ] # ls sda SDa sdaa SDaa sdaaa sdaaaa SDaaaa sdaab sdaz [root@APP rm ] # ls |grep -v SD|xargs rm -f [root@APP rm ] # ls SDa SDaa SDaaaa [root@APP rm ] #还有一种更为方便的方法,需要卡其BashShell的extglob选项, 1 2 3 4 5 6 7 8 [root@APP rm ] # touch sda SDa sdaa SDaa sdaaa sdaaaa SDaaaa sdaab sdaz [root@APP rm ] # rm -f !(SD*) - bash : !: event not found [root@APP rm ] # shopt -s extglob [root@APP rm ] # rm -rf !(SD) [root@APP rm ] # ls SDa SDaa SDaaaa [root@APP rm ] #如果出现-bash: !: event not found表示当前系统未开启, 列出所有选项:shopt -p 列出所有打开的选项:shopt -s 开启extglob命令:shopt -s extglob 列出所有关闭的选项:shopt -u 关闭extglob命令:shopt -u extglob 开启之后,以下5个模式匹配操作符将被识别: ?(pattern-list) - 所给模式匹配0次或1次; *(pattern-list) - 所给模式匹配0次以上包括0次; +(pattern-list) - 所给模式匹配1次以上包括1次; @(pattern-list) - 所给模式仅仅匹配1次; !(pattern-list) - 不匹配括号内的所给模式。 !():与@()相反 |
CopyRight 2018-2019 实验室设备网 版权所有 |