JIS偵傛傞晛捠岞嵎偺摍媺乥惛媺丄拞媺丄慹媺丄嬌慹媺偺挿偝偲妏搙偺晛捠岞嵎昞

2024-02-28 14:31| 来源: 网络整理| 查看: 265

晛捠岞嵎偲偼丄恾柺偺悺朄偵懳偟偰僘儗偺嫋偝傟傞挿偝傗妏搙偺乽忋尷乿偲乽壓尷乿偺斖埻傪丄摍媺偵傛偭偰堦棩偵掕傔偨JIS偺婯奿偱偡丅堦斒岞嵎偲傕偄傢傟丄塸岅偱偼General tolerances偲偄偄丄傛偔巊傢傟傞偺偑晛捠岞嵎昞偺拞媺偲偄偆摍媺偱偡丅摍媺偼惛媺丄拞媺丄慹媺丄嬌慹媺偺係庬椶偵暘偗傜傟偰偍傝丄偦傟偧傟偱媮傔傜傟傞惛搙丄偮傑傝偢傟偰傕傛偄悺朄偺嫋梕斖埻偑曄傢傝傑偡丅傑偨丄岞嵎偺抣偼丄摍媺偩偗偱側偔悺朄偺戝偒偝偵傛偭偰傕曄傢傝傑偡丅僒僀僘偑450mm偺傕偺偲丄10mm偺傕偺偱偼摨偠摍媺偱傕岞嵎偺抣偼堎側傞偲偄偆偙偲偱偡丅

椺偊偽丄恾柺偱挿偝偑5mm偲側偭偰偄傞晛捠岞嵎偵偍偗傞拞媺偺岞嵎偼亇0.1mm偲側傝傑偡丅偟偨偑偭偰丄恾柺忋偱晛捠岞嵎偺拞媺傪嵦梡偟偰偄傞応崌丄偦偺晹埵偼岞嵎偺巜掕偑側偔偰傕丄5亇0.1偲偄偆偙偲偵側傝傑偡丅

側偍丄廂弅偑敪惗偡傞僑儉偺岞嵎偵偼愱梡偺岞嵎昞偑巊傢傟傞偙偲偑偁傝傑偡丅

JIS偵傛傞晛捠岞嵎偺摍媺乥惛媺丄拞媺丄慹媺丄嬌慹媺偺挿偝偲妏搙偺晛捠岞嵎昞乥栚師偦傕偦傕岞嵎偲偼岞嵎偺庬椶恾柺偱偺岞嵎巜掕曽朄 JIS婯奿偺晛捠岞嵎摍媺傪巊偆応崌晛捠岞嵎昞乥挿偝悺朄偺惛媺丄拞媺丄慹媺丄嬌慹媺晛捠岞嵎昞偺塸岅昞婰乥挿偝悺朄偺惛媺丄拞媺丄慹媺丄嬌慹媺晛捠岞嵎昞乥柺庢傝悺朄丒妏偺娵傒偺惛媺丄拞媺丄慹媺丄嬌慹媺晛捠岞嵎昞偺塸岅昞婰乥柺庢傝丄妏偺娵傒偺惛媺丄拞媺丄慹媺丄嬌慹媺晛捠岞嵎昞乥妏搙悺朄偺惛媺丄拞媺丄慹媺丄嬌慹媺晛捠岞嵎昞偺塸岅昞婰乥妏搙偺惛媺丄拞媺丄慹媺丄嬌慹媺

晛捠岞嵎昞偺傛偄偲偙傠偼丄偙傟傪揔梡偡傞偲恾柺偵昞婰偟偰偍偗偽丄悺朄昞婰偺岞嵎傪偄偪偄偪偡傋偰偵偮偄偰婰嵹偟側偔偰偡傓揰偱偡丅傑偨恾柺傪尒偰惢憿偡傞懁偵偲偭偰傕丄岞嵎偑偡傋偰偺悺朄悢抣偵彂偐傟偰偄偨傜尒偯傜偔偰偨傑傝傑偣傫丅恾柺偵懳偟偰丄偙偙偱偼晛捠岞嵎拞媺偺岞嵎傪揔梡丄偲巜掕偝傟偰偄傟偽丄帺偢偲庣傞傋偒悺朄偺斖埻偑尒偊偰偒傑偡丅

恾柺撪偱僇僢僐偱偔偔傜傟偨丄偄傢備傞嶲峫悺朄偲偄偆傕偺偑偁傝傑偡偑丄偙傟偵偼晛捠岞嵎昞偼揔梡偝傟傑偣傫丅

偦傕偦傕岞嵎偲偼

10mm偺挿偝偺傕偺傪壛岺偡傞偵偟偰傕丄姰慡偵10mm偺傕偺傪嶌傞偙偲偼偱偒傑偣傫丅寁應偟偰傒傟偽丄10.001mm偱偁偭偨傝丄10.02mm偱偁偭偨傝偟傑偡丅愝寁幰偺堄恾偲偟偰傕丄偙偺10mm傪巜掕偟偨応崌偵慱偭偰偄傞悺朄偺斖埻偼丄傎偲傫偳偺応崌丄10.000000001mm偐傜10.000000003mm偲偄偆傛偆側傕偺偱偼偁傝傑偣傫丅

椺偊偽丄9.9mm乣10.1mm偺斖埻偵擖偭偰偄傟偽傛偄丄偲偄偆傛偆側応崌丄偦偺斖埻傪巜掕偡傞偺偑悺朄岞嵎偱偡丅悺朄岞嵎偑尩偟偗傟偽丄壛岺偺僐僗僩偑忋偑傝丄帪娫傕偐偐傝傑偡丅偙偺偨傔丄昁梫側惛搙偵傛偭偰岞嵎傪巊偄暘偗傞偺偑堦斒揑偱偡丅

岞嵎偺庬椶

岞嵎偵偼悺朄岞嵎丄偼傔偁偄岞嵎丄婔壗岞嵎偺俁偮偺庬椶偑偁傝丄偦傟偧傟壓昞偺傛偆偵側偭偰偄傑偡丅

恾柺偱偺岞嵎偺庬椶堦棗岞嵎偺庬椶撪梕 JIS婯奿悺朄岞嵎俀揰娫偺挿偝丄捈宎丄敿宎丄妏偺娵傒傗柺庢傝悺朄偑懳徾 JIS B 0405 偼傔偁偄岞嵎屳偄偵偼傑傝偁偆娭學偵偁傞寠宎偲幉宎偺岞嵎乮悺朄嫋梕嵎乯傪婰崋偱偁傜傢偟偨傕偺 JIS B 0401 婔壗岞嵎恀墌搙傗摨幉搙丄墌摏搙丄暯柺搙丄恀捈搙側偳偲偄偭偨丄偁傞傋偒宍忬傗柺偵懳偟偰偺岞嵎 JIS B 0419

悺朄岞嵎傪掕傔偨JIS婯奿偺偆偪丄JIS B 0405乽晛捠岞嵎乚戞1晹丗屄乆偵岞嵎偺巜帵偑側偄挿偝悺朄媦傃妏搙悺朄偵懳偡傞岞嵎乿偼ISO偱偼ISO 2768偲昞帵偝傟偰偄傑偡丅

恾柺偱偺岞嵎巜掕曽朄

悺朄岞嵎偺恾柺偱偺彂偒曽傗撉傒曽偼偙偪傜偱徯夘偟偨捠傝偱偡偑丄巜掕偟側偄応崌偵堦棩偵揔梡偝傟傞岞嵎偲偟偰丄晛捠岞嵎傪巊偆応崌偼偍偍傓偹師偺俀捠傝偑偁傝傑偡丅

晛捠岞嵎偵偮偄偰偼丄侾丏奺幮偱撈帺偺岞嵎昞傪嶌惉偟偰梡偄傞偙偲傕偱偒傟偽丄俀丏JIS婯奿偱婯掕偝傟偨傕偺傪偦偺傑傑巊偆偙偲傕偱偒傑偡丅慜弎偺捠傝丄悺朄悢抣偺傂偲偮傂偲偮偵岞嵎傪偮偗偰偄偔偺偼嶌恾偡傞傎偆傕撉恾偡傞傎偆傕堦嬯楯偱偡丅偟偨偑偭偰丄傎偲傫偳偺恾柺偱偼摿暿側岞嵎巜掕売強偑側偄晹暘偵偼丄JIS偺晛捠岞嵎偐丄帺幮偱婯掕偟偨晛捠岞嵎偺偄偢傟偐傪堦棩偱梡偄偰偄傑偡丅

恾柺偱巜掕偡傞応崌丄岞嵎昞帺懱傪恾柺偵挘傝晅偗偰偄傞働乕僗偑傛偔尒傜傟傑偡偑丄恾柺傪尒傞傎偆傕娫堘偄偑彮側偔丄婯奿傪偦偺搒搙尒捈偡昁梫偑側偄偺偱曋棙側曽朄偱偡丅傑偨丄帺幮婯奿偺岞嵎昞傪巊偆応崌偼丄撈帺偺昞傪恾柺偵傕婰嵹偟偰偍偔偲娫堘偄偑尭傝傑偡丅

JIS婯奿偺晛捠岞嵎摍媺傪巊偆応崌

壓昞偺傛偆偵丄嵦梡偡傞摍媺偵墳偠偰丄JIS偺婯奿斣崋偲堦弿偵昞戣棑偺嬤偔偵婰嵹偟偰偍偔偐丄嵦梡偡傞岞嵎昞帺懱傪恾柺偵挘傝晅偗偰偍偒傑偡丅

恾柺偱偺JIS晛捠岞嵎偺彂偒曽丒巜掕椺婰嵹椺摍媺 JIS B 0405-f丂惛媺 JIS B 0405-m丂拞媺 JIS B 0405-c丂慹媺 JIS B 0405-v丂嬌慹媺

晛捠岞嵎昞偵奩摉偟側偄岞嵎傪巜掕偡傞売強偼丄偡傋偰屄暿偵婰擖偟偰嶌恾偟傑偡丅偮傑傝丄恾柺偵岞嵎偑捈愙彂偐傟偰偄傞応崌偼丄晛捠岞嵎偺婎弨偑忋彂偒偝傟丄捈愙巜掕偝傟偰偄傞岞嵎偑揔梡偝傟傑偡丅

晛捠岞嵎昞乥挿偝悺朄偺惛媺丄拞媺丄慹媺丄嬌慹媺

懠偺婯奿偱婯掕偝傟偰偄側偄応崌偲偄偆忦審晅偒偱丄挿偝悺朄乮奜懁悺朄丄撪懁悺朄丄抜嵎悺朄丄捈宎丄敿宎側偳乯偵揔梡偝傟傑偡丅0.5mm枹枮偵偮偄偰偼丄屄乆偵巜掕偡傞寛傑傝偵側偭偰偄傑偡丅

晛捠岞嵎昞乥挿偝乮扨埵丗mm乯婎弨偲側傞悺朄偺嬫暘岞嵎摍媺惛媺乮f乯拞媺乮m乯慹媺乮c乯嬌慹媺乮v乯 0.5埲忋3埲壓亇0.05 亇0.1 亇0.2 - 3傪挻偊6埲壓亇0.05 亇0.1 亇0.3 亇0.5 6傪挻偊30埲壓亇0.1 亇0.2 亇0.5 亇1 30傪挻偊120埲壓亇0.15 亇0.3 亇0.8 亇1.5 120傪挻偊400埲壓亇0.2 亇0.5 亇1.2 亇2.5 400傪挻偊1000埲壓亇0.3 亇0.8 亇2 亇4 1000傪挻偊2000埲壓亇0.5 亇1.2 亇3 亇6 2000傪挻偊4000埲壓 - 亇2 亇4 亇8 晛捠岞嵎昞偺塸岅昞婰乥挿偝悺朄偺惛媺丄拞媺丄慹媺丄嬌慹媺

挿偝偺晛捠岞嵎傪塸岅昞婰偟偨応崌偼丄壓昞偲側傝傑偡丅

乽0.5mm枹枮偺婎弨悺朄偵懳偟偰偼丄偦偺婎弨悺朄偵懕偗偰嫋梕嵎傪屄乆偵巜帵偡傞乿偺扐偟彂偒晹暘傪塸岅偵捈偡偲丄乽For nominal sizes below 0.5 mm, the deviations shall be indicated adjacent to the relevant nominal size(s).乿偲側傝傑偡丅

GENERAL TOLERANCES FOR LINEAR DIMENSIONS (Values in millimetres) Permissible deviations of basic size range Tolerance class fine (f) medium (m) coarse (c) very coarse (v) 0.5 up to 3 亇0.05 亇0.1 亇0.2 - over 3 up to 6 亇0.05 亇0.1 亇0.3 亇0.5 over 6 up to 30 亇0.1 亇0.2 亇0.5 亇1 over 30 up to 120 亇0.15 亇0.3 亇0.8 亇1.5 over 120 up to 400 亇0.2 亇0.5 亇1.2 亇2.5 over 400 up to 1000 亇0.3 亇0.8 亇2 亇4 over 1000 up to 2000 亇0.5 亇1.2 亇3 亇6 over 2000 up to 4000 - 亇2 亇4 亇8 晛捠岞嵎昞乥柺庢傝悺朄丒妏偺娵傒偺惛媺丄拞媺丄慹媺丄嬌慹媺

妏傗僐乕僫乕偺娵傒丄柺庢傝悺朄偵偮偄偰偺晛捠岞嵎偼JIS偱偼埲壓偑揔梡壜擻偱偡丅0.5mm枹枮偵偮偄偰偼丄屄乆偵巜掕偡傞寛傑傝偵側偭偰偄傑偡丅

晛捠岞嵎昞乥柺庢傝丄妏偺娵傒乮扨埵丗mm乯婎弨偲側傞悺朄偺嬫暘岞嵎摍媺惛媺乮f乯拞媺乮m乯慹媺乮c乯嬌慹媺乮v乯 0.5埲忋3埲壓亇0.2 亇0.2 亇0.4 亇0.4 3傪挻偊6埲壓亇0.5 亇0.5 亇1 亇1 6傪挻偊傞傕偺亇1 亇1 亇2 亇2 晛捠岞嵎昞偺塸岅昞婰乥柺庢傝丄妏偺娵傒偺惛媺丄拞媺丄慹媺丄嬌慹媺

柺庢傝傗妏偺娵傒偵偮偄偰偺晛捠岞嵎偵偍偗傞塸岅昞婰偼壓昞偺傛偆偵側傝傑偡丅

GENERAL TOLERANCES FOR EXTERNAL RADIUS AND CHAMFER HEIGHTS (Values in millimetres) Permissible deviations of basic size range Tolerance class fine (f) medium (m) coarse (c) very coarse (v) 0.5 up to 3 亇0.2 亇0.2 亇0.4 亇0.4 over 3 up to 6 亇0.5 亇0.5 亇1 亇1 over 6 亇1 亇1 亇2 亇2 晛捠岞嵎昞乥妏搙悺朄偺惛媺丄拞媺丄慹媺丄嬌慹媺

妏搙偵偮偄偰偺晛捠岞嵎偼壓昞偲側傝傑偡丅側偍丄偙傟偼懳徾偲偡傞妏搙偺抁偄傎偆偺曈偺挿偝偵傛偭偰婎弨偲側傞悺朄嬫暘偑愝掕偝傟偰偄傑偡丅

晛捠岞嵎昞乥妏搙乮扨埵丗mm乯婎弨偲側傞悺朄偺嬫暘乮懳徾妏搙偺抁偄傎偆偺曈偺挿偝乯岞嵎摍媺惛媺乮f乯拞媺乮m乯慹媺乮c乯嬌慹媺乮v乯 10埲壓亇1亱亇1亱亇1亱30乫亇3亱 10傪挻偊50埲壓亇30' 亇30' 亇1亱亇2亱 50傪挻偊120埲壓亇20' 亇20' 亇30' 亇1亱 120傪挻偊400埲壓亇10' 亇10' 亇15' 亇30' 400傪挻偊傞傕偺亇5' 亇5' 亇10' 亇20' 晛捠岞嵎昞偺塸岅昞婰乥妏搙偺惛媺丄拞媺丄慹媺丄嬌慹媺

妏搙悺朄偵偮偄偰偺晛捠岞嵎昞偺塸岅昞婰偼壓昞偲側傝傑偡丅

GENERAL TOLERANCES FOR ANGULAR DIMENSIONS Permissible deviations for ranges of lengths, in millimetres, of the shorter side of the angle concerned Tolerance class fine (f) medium (m) coarse (c) very coarse (v) up to 10 亇1亱亇1亱亇1亱30乫亇3亱 over 10 up to 50 亇30' 亇30' 亇1亱亇2亱 over 50 up to 120 亇20' 亇20' 亇30' 亇1亱 over 120 up to 400 亇10' 亇10' 亇15' 亇30' over 400 亇5' 亇5' 亇10' 亇20'

僗億儞僒乕儕儞僋

>乽JIS偵傛傞晛捠岞嵎偺摍媺乥惛媺丄拞媺丄慹媺丄嬌慹媺偺挿偝偲妏搙偺晛捠岞嵎昞乿偺愭摢傊

搖愇俻仌俙堦棗傊栠傞 JIS偵傛傞晛捠岞嵎偺摍媺乥惛媺丄拞媺丄慹媺丄嬌慹媺偺挿偝偲妏搙偺晛捠岞嵎昞偺娭楢婰帠偲儕儞僋恾柺偱偺岞嵎偺彂偒曽乥悺朄岞嵎偺昞婰偲尒曽偵偮偄偰 H7側偳偺婰崋偱帵偝傟傞乽偼傔偁偄岞嵎乿偲偼壗偱偡偐丠偼傔偁偄岞嵎昞乮JIS婯奿偵傛傞嫋梕悺朄堦棗昞乯

【本文地址】

公司简介

联系我们