Python PyQt5中弹出子窗口解决子窗口一闪而过的问题 |
您所在的位置:网站首页 › 抖音上的一闪而过怎么取消 › Python PyQt5中弹出子窗口解决子窗口一闪而过的问题 |
转载自:https://www.jb51.net/article/208142.htm
方式一:槽函数中创建子窗口对象,赋值到普通变量
在主窗口添加按钮,并把按钮信号关联槽,在槽函数中创建子窗口对象赋值到普通变量,并调用其 show 方法。 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 from PyQt5.QtWidgets import * import sys
class Main(QMainWindow): def __init__(self): super().__init__() self.setWindowTitle("主窗口") button = QPushButton("弹出子窗", self) button.clicked.connect(self.show_child)
def show_child(self): child_window = Child() child_window.show()
class Child(QWidget): def __init__(self): super().__init__() self.setWindowTitle("我是子窗口啊")
# 运行主窗口 if __name__ == "__main__": app = QApplication(sys.argv)
window = Main() window.show()
sys.exit(app.exec_()) 运行结果: 该段代码运行后,点击主窗口中的按钮,子窗口一闪而过。 方式二:槽函数中创建子窗口对象,赋值为对象属性在主窗口添加按钮,并把按钮信号关联槽,在槽函数中创建子窗口对象并赋值为对象属性,并调用其 show 方法。 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 from PyQt5.QtWidgets import * import sys
class Main(QMainWindow): def __init__(self): super().__init__() self.setWindowTitle("主窗口") button = QPushButton("弹出子窗", self) button.clicked.connect(self.show_child)
def show_child(self): self.child_window = Child() self.child_window.show()
class Child(QWidget): def __init__(self): super().__init__() self.setWindowTitle("我是子窗口啊")
# 运行主窗口 if __name__ == "__main__": app = QApplication(sys.argv)
window = Main() window.show()
sys.exit(app.exec_()) 运行结果: 该段代码运行后,点击主窗口中的按钮,子窗口正常打开,重复点击按钮,子窗口重复弹出。 方式三:在主窗口__init__方法中创建子窗在主窗口__init__方法中创建子窗口对象并赋值为对象属性,添加按钮,并把按钮信号关联槽,在槽函数中调用子窗口对象的 show 方法。 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 from PyQt5.QtWidgets import * import sys
class Main(QMainWindow): def __init__(self): super().__init__() self.setWindowTitle("主窗口") button = QPushButton("弹出子窗", self) button.clicked.connect(self.show_child) self.child_window = Child()
def show_child(self): self.child_window.show()
class Child(QWidget): def __init__(self): super().__init__() self.setWindowTitle("我是子窗口啊")
# 运行主窗口 if __name__ == "__main__": app = QApplication(sys.argv)
window = Main() window.show()
sys.exit(app.exec_()) 运行结果: 重复点击按钮,子窗口不重复弹出。 方式四:exec()方法把例1的show()方法改为exec()方法 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 from PyQt5.QtWidgets import * import sys
class Main(QMainWindow): def __init__(self): super().__init__() self.setWindowTitle("主窗口") button = QPushButton("弹出子窗", self) button.clicked.connect(self.show_child)
def show_child(self): child_window = Child() child_window.exec()
class Child(QWidget): def __init__(self): super().__init__() self.setWindowTitle("我是子窗口啊")
# 运行主窗口 if __name__ == "__main__": app = QApplication(sys.argv)
window = Main() window.show()
sys.exit(app.exec_()) 运行结果:子窗口顺利弹出,且不能重新选择父窗口 结论:这里涉及到一个概念 模式对话框 与 非模式对话框 (modeless dialog | modal dialog) 模式对话框,就是在弹出窗口的时候,整个程序就被锁定了,处于等待状态,直到对话框被关闭。这时往往是需要对话框的返回值进行下面的操作。如:确认窗口(选择“是”或“否”)。 非模式对话框,在调用弹出窗口之后,调用即刻返回,继续下面的操作。这里只是一个调用指令的发出,不等待也不做任何处理。如:查找框。 show() ------ modeless dialog exec() ------- modal dialog 方式一中 子窗口 通过 show() 方法显示,为非模态窗口,它的实例为父窗口show_child()方法中的局部变量,当窗口显示后,父窗口的show_child()方法继续执行,当方法运行完后,python的回收机制就把局部变量销毁了,相当于子窗口实例被销毁,故子窗口一闪而过;方式二中 子窗口实例为 主窗口类的变量,当show_child()方法运行完后,主窗口对象依旧存在,子窗口实例也存在,故子窗口正常显示,但是每一次运行槽函数都会重新创建子窗口对象;方式三中 子窗口实例为 主窗口类的变量,当show_child()方法运行完后,主窗口对象依旧存在,子窗口实例也存在,故子窗口正常显示,每一次show_child()函数,重新调用子窗口对象show_child()方法,不会创建新窗口,且可随意在父,子窗口间切换;方式四中 子窗口 通过 exec() 方法显示,为模态窗口,虽然他为父窗口show_child()方法中的局部变量,由于阻塞的机制,父窗口show_child()并没有继续执行,故其不会像 例1 中 一闪而过,且不能在父,子窗口间切换; |
今日新闻 |
点击排行 |
|
推荐新闻 |
图片新闻 |
|
专题文章 |
CopyRight 2018-2019 实验室设备网 版权所有 win10的实时保护怎么永久关闭 |