一、配置telnet：

使用真机远程连接ENSP交换机（真机IP地址配置到VirtualBox Host-Only Ethernet Adapter网卡）

在自己的电脑上打开网络连接，然后你可以看到VirtualBox Host-Only Network，右击打开属性，最后按下面的图走：

拓扑图以及Cloud配置：

最后测试连通性以及telnet测试

SSH的配置

[Huawei]stelnet server en     [Huawei]stelnet server enable  Info: Succeeded in starting the Stelnet server. [ [Huawei]ssh authentication-type default password  [Huawei]aaa [Huawei-aaa]local-user ssher password cipher Huawei12#$ Info: Add a new user.     [Huawei-aaa]local-user ssher service-type ssh  [Huawei-aaa]local-user ssher privilege level 15 [Huawei-aaa]quit [Huawei]rsa local-key-pair create  The key name will be: Huawei_Host The range of public key size is (512 ~ 2048).  NOTES: If the key modulus is greater than 512,         it will take a few minutes. Input the bits in the modulus[default = 512]:1024 Generating keys... ...........................................++++++ .....++++++ ..++++++++ ........++++++++ [Huawei]user-interface vty 0 4 [Huawei-ui-vty0-4]protocol inbound ssh  [Huawei-ui-vty0-4]quit