1.25G-GBIC-10 is Multi-Vendor MSA Compatible GBIC (Gigabit Interface Converter) Transceiver, operating over Double Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 12 dB, with in most cases is enough to reach about 10 km distance. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality FP Laser transmitter with operating at nominal wavelength 1310 nm. and 1310 nm. PIN Photodiode receiver. 1.25G-GBIC-10 operates in Standard 0°-70°C temperature range and has Double SC interface. GBIC support 1.063-1.25Gbps data rate and such applications as Gigabit Ethernet (1.25 Gbps)|1G Fiber Channel (1.0625 Gbps). 1.25G-GBIC-10 GBIC Double Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular applications are Internet Service Provider (ISP) Fiber To The Home aggregation and backbone, Various Data Communication Gigabit Ethernet Links, Data Center SAN networking and other optical links.

    Transceiver is CE/RoHS certified and it is Compliant with product safety standards. 1.25G-GBIC-10 GBIC Transceiver is fully compliant to SFF-8053 Specification for GBIC (Gigabit Interface Converter). Consequently, it means that module is compatible with 80% of networking equipment, where is not implemented a special algorithm for protection against third party modules. However – we can provide GBIC transceiver with custom-encoded firmware in order to make it work almost in any equipment. Therefore, we will be glad to know what your requirement is. Because our focus is providing top quality service, we are performing serious quality checks before delivery of our products. As a result, we do optical parameter measurements, connector cleanness tests and GBIC transceiver EEPROM memory data validation tests.

Single-Mode Fiber (SMF)

1310 nm.

1310 nm.

12 dB

10km

1.063-1.25Gbps

Gigabit Ethernet (1.25 Gbps), 1G Fiber Channel (1.0625 Gbps)

Not Available

Standard 0°-70°C

Double SC

100 nm (1260-1360 nm)

100 nm (1260-1360 nm)

-9 dB

3 dB

-21 dBm

-3 dBm

70-100 ps/nm

FP Laser

PIN photodiode

+3.3V single power supply

SEMTECH, UX

CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8053 GBIC Multi-Source Agreement (MSA)

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.