使用docker快速部署wordpress并绑定SSL证书以及常见问题 |
您所在的位置:网站首页 › docker安装ssl证书 › 使用docker快速部署wordpress并绑定SSL证书以及常见问题 |
因为准备帮人搭建个wordpress网站,想到docker更便捷且有相对隔离的环境,果断决定使用docker来快速部署。 既然使用docker部署,前提自然得有docker环境,此篇基于Linux centOS 7.5+ 环境部署,需要的安装的有:wordpress(必须),mariadb/mysql(可选),nginx(可选): 按照操作的简易程度和目的,分为仅搭建wordpress,或是wordpress站点在docker环境下启用SSL证书,也就是HTTPS访问。 wordpress版本和对应的php版本关系: WP版本↓PHP版本→ 5.67.07.17.27.37.48.08.18.2 6.2√√√√√√√√√6.1√√√√√√√√√6.0√√√√√√√√×5.9√√√√√√√√×5.8√√√√√√√××5.7√√√√√√√××5.6√√√√√√√××5.5√√√√√√××× docker快速部署wordpress准备工作 1.预装docker环境:如果没有安装docker,也简单,两行搞定: yum install -y docker systemctl start docker分别是安装,启动docker (linux centos 7+环境) 2.拉取wordpress镜像:拉取镜像,先拉取wordpress镜像 docker pull wordpress //如要指定版本如5.6 ,换为: docker pull wordpress:5.6此操作拉取了最新版本,如果要指定版本,在wordpress后:版本号 即可,如: docker pull wordpress:5.6 当前官网推荐配置: 3.拉取mariadb镜像,如没有数据库或链接配置,则需安装:通常小站的wp数据库都同时在本机进行部署,即如果没有数据库环境,则需要在当前环境下安装数据库,或者采用连接远程数据库的方式。使用docker安装mysql或是mariadb均可,建议安装mariadb,和5.7版mysql比,内存占用少,开销少了花费少。 docker run --name mariadb10.3 --restart=always -p 3307:3306 -e MYSQL_ROOT_PASSWORD='yourpassword' -v /home/mysql/data:/var/lib/mysql -d mariadb:10.3 --lower_case_table_names=1y以上完成mariadb10.3的安装和运行,修改MYSQL_ROOT_PASSWORD为自己密码即可,数据库挂载在宿主机/home/mysql/data下,同时暴露了外网端口为3307,当然出于安全也可以不开放外部访问端口,直接用 -p 3306即可。 此时 docker ps 应该可以看到有IMAGE 下面有mariadb:10.3 的容器在运行中: 进入mariadb创建对应wordpress的数据库名称:docker exec -it bd(容器ID) /bin/bashmysql -uroot -p yourpassword;此数据库名 root ,yourpassword 在之后wordpress初始化要使用use mysql;create database mywp(数据库名称); //mywp 即为起的数据库名,可随意修改show databases; //会看到刚才自己定义的数据库名;此数据库名在之后wordpress初始化要使用exit; //退出docker inspect bd(容器ID)|grep IPAddress //获取的ip在之后wordpress初始化要使用。3.拉取Nginx镜像,不是必须的:如果一个服务器需要部署多个wordpress站点时,由于服务器的IP只有一个80端口用于绑定域名,所以此时需要时候Nginx实现代理访问。如果只部署单个站点则可不使用nginx。 docker安装wordpress安装和操作LAMP相比简单太多,一行命令: docker run --restart=always --name Mywordpress -p 80:80 -d wordpress解释下:–name 后面 Mywordpress 是自定义的名称 -p 是端口映射,表示公网80端口映射至容器80端口,如果服务器没使用nginx,做为简单的配置或测试,可以直接用80端口,如果用了nginx做反代,可调整端口配置。 -d 后台运行 。后面的wordpress,则是之前拉取的镜像名 ,这里指默认拉取了最新版的,如果指定了拉取版本,那么此时运行也需要加上版本: wordpress:5.6 --restart=always 容器退出时,docker会总是自动重启这个容器 这里使用的参数简单,当然启动参数还可以扩充。 比如 --link mysqlXXX:mysql 表示数据库连接参数。 操作完成,查看是否运行 使用docker -p。 如果列表有包含Mywordpress 的项目,则表明运行成功。 接着浏览器试试 http://172.x.x.x (对应的ip地址) 进入wordoress安装界面,到此安装完成,下一步进入wp的安装配置页。 顺便提一句,如果此处使用了docker安装的mysql/mariadb数据库,那么数据库主机地址ip可用mariadb对应的docker容器ip如我这里172.17.0.2,如果是连接了外部库或者开放了mariadb公网ip,那么数据库主机也可以使用公网ip 之前有遇到过,如果在浏览器不能的打开 wordpress的起始安装页,那就 dockers logs MywordpressId 看看日志: AH00558: apache2: Could not reliably determine the server’s fully qualified domain name, using 172.17.0.x. Set the ‘ServerName’ directive globally to suppress this messageapache 报错了 172.17.0.x 无疑是wp的容器ip了 在apache的默认配置文件内放开 ServerName IP 注释即可 具体的文件路径是: /etc/apache2/sites-enabled/000-default.conf因为容器没有修改命令,可安装,也可以 先把容器文件复制到宿主机 在宿主机修改此文件 在将文件复制到容器 比如我这wordpress的容器ID是 69123456789 docker cp -L 69:/etc/apache2/sites-enabled/000-default.conf /home/修改的内容是: 放开 ServerName ,并修改后面的ip为容器ip 即 ServerName 172.17.0.x 完整文件内容: # The ServerName directive sets the request scheme, hostname and port that # the server uses to identify itself. This is used when creating # redirection URLs. In the context of virtual hosts, the ServerName # specifies what hostname must appear in the request's Host: header to # match this virtual host. For the default virtual host (this file) this # value is not decisive as it is used as a last resort host regardless. # However, you must set it for any further virtual host explicitly. ServerName 172.17.0.x #SeverAdmin webmaster@localhost DocumentRoot /var/www/html # Available loglevels: trace8, ..., trace1, debug, info, notice, warn, # error, crit, alert, emerg. # It is also possible to configure the loglevel for particular # modules, e.g. #LogLevel info ssl:warn ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined # For most configuration files from conf-available/, which are # enabled or disabled at a global level, it is possible to # include a line for only one particular virtual host. For example the # following line enables the CGI configuration for this host only # after it has been globally disabled with "a2disconf". #Include conf-available/serve-cgi-bin.conf修改后还原至容器内: docker cp /home/000-default.conf 69:/etc/apache2/sites-enabled/000-default.conf此时,再重启wordpress 容器: docker restart CONTAINER_ID查看运行日志,发现有报错: Invalid command 'SeverAdmin', perhaps misspelled or defined by a module not included in the server configuration注释掉 上面文件中 SeverAdmin 内容 再次重启 OK,进入wordpress 安装页面。 不得不说,php的运行占用内存和java比,是真的少。启动时只有53M,下面的java项目启动都得400M内存占用。 CONTAINER ID NAME CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O 69********** Mywordpress 0.01% 59.81MiB / 1.795GiB 3.25% 1.07MB / 516kB 4.87MB / 758kB ************ myxx 0.29% 458.5MiB / 1.795GiB 24.94% 633MB / 317MB 50.2MB / 20.5kB ************ mariadb 0.11% 121.5MiB / 1.795GiB 6.61% 233MB / 1.34GB 100MB / 407MB |
今日新闻 |
点击排行 |
|
推荐新闻 |
图片新闻 |
|
专题文章 |
CopyRight 2018-2019 实验室设备网 版权所有 win10的实时保护怎么永久关闭 |