实验三 配置OSPF外部路由汇总.doc

R1(r4(config-router)#exit在r3上进行OSPF配置r3(config)#router ospf 1r3(config-router)#network area 0r3(config-router)#exitr3(config)#router ripr3(config-router)#network r3(config-router)#exit

r3(config)#router ospf 1r3(config-router)#redistribute rip metric 200 subnets 将rip的路由重发布到ospf自治系统中r3(config-router)#exitr3(config)#router ripr3(config-router)#redistribute ospf 1 metric 10 将ospf自治系统路由重发布到rip网络中r3(config-router)#exit。r1#show ip routeCodes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGPi - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static routeGateway of last resort is not set is subnetted, 2 subnetsC is directly connected, Loopback0C is directly connected, Loopback1 is subnetted, 3 subnetsO E2 [110/200] via , 00:12:57, Serial2/0