材料科学与工程学院

[1]    Dang X#, Li Y#（共同一作）, Chen K, et al. Avoiding cracks in additively manufactured non-weldable directionally solidified Ni-based superalloys[J]. Additive Manufacturing, 2022, 59: 103095. （中科院 1区）

[2]    Dang X, Li Y*（通讯作者）, Chen K, et al. Insight into the interfacial architecture of a hybrid additively-manufactured stainless steel/Ni-based superalloy bimetal[J]. Materials & Design, 2022, 216: 110595. 

[3]    Chen Z#,*, Li Y#,*（共同一作&通讯作者）, Zhang S, et al. Hierarchical architecture and mechanical behavior of K418 Ni-based superalloys manufactured by laser powder bed fusion[J]. Materials Science and Engineering: A, 2022, 851: 143630. （中科院 1区）

[4]    Liu Y, Li Y*（通讯作者）, Kou H, et al. Microstructural and hardness investigation of a multiphase Mo-Si-B alloy processed by laser surface remelting[J]. Surface and Coatings Technology, 2022: 129012. （中科院 1区）

[5]    Zhang F, Huang K, Zhao K, Tan H, Li Y, et al. Directed energy deposition combining high-throughput technology and machine learning to investigate the composition-microstructure-mechanical property relationships in titanium alloys[J]. Journal of Materials Processing Technology, 2023, 311: 117800. （中科院 1区）

[6]    Zhao K, Zhou X, Hu T, Li Y, et al. Microstructure characterization and tensile properties of Ti–15Mo alloy formed by directed energy deposition[J]. Materials Science and Engineering: A, 2022, 858: 144103. （中科院 1区）

[7]    李尧，党晓凤，陈凯，何卫锋，感应加热对激光增材修复高温合金DZ125L组织和力学性能的影响，机械工程学报，2021, 57(22): 52-59. （中文核心EI）

[8]    李尧，杨浩，贺红伟，张洁，张孟延，李梦阳，郝建民，后处理对激光重熔Inconel 718合金组织及性能的影响，中国有色金属学报，2022, 32(6): 1673-1684. （中文核心EI）

[9]    杨浩，李尧（通讯作者），郝建民，激光增材制造Inconel 718高温合金研究进展，材料导报，2022, 36(6): 129-138. （中文核心EI）

[10]Li Y, Chen K, Narayan RL, et al. Multi-scale microstructural investigation of a laser 3D printed Ni-based superalloy[J].Additive Manufacturing, 2020, 34: 101220. （中科院 1区）

[11]Li Y, Chen K, Dang X, et al. XtalCAMP: A comprehensive program for the analysis and visualization of scanning Laue X-ray micro-/nanodiffraction data[J]. Journal of Applied Crystallography, 2020, 53: 1392–1403. （中科院 2区）

[12]Chen K, Huang R, Li Y, et al. Rafting-Enabled Recovery Avoids Recrystallization in 3D-Printing-Repaired Single-Crystal Superalloys[J]. Advanced Materials, 2020, 32 (12): 1907064.（中科院 1区）

[13]Li Y, Chen K, Tamura N. Mechanism of heat affected zone cracking in Ni-based superalloy DZ125L fabricated by laser 3D printing technique [J]. Materials & Design, 2018, 150, 171-181. （中科院 1区）

[14]Li Y, Qian D, Xue J, Wan J, Zhang A, Tamura N, Song Z, Chen K. A synchrotron study of defect and strain inhomogeneity in laser-assisted three-dimensionally-printed Ni-based superalloy [J]. Applied Physics Letters, 2015, 107 (18): 181902. （中科院 2区）

[15]Li Y, Wan L, Chen K. A look-up table based approach to characterize crystal twinning for synchrotron X-ray Laue microdiffraction scans [J]. Journal of Applied Crystallography, 2015, 48 (3): 747–757. （中科院 2区）

[16]Xue J, Zhang A, Li Y（共同一作）, Qian D, Wan J, Qi B, Tamura N, Song Z, Chen K. A synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy [J].Scientific Reports, 2015, 5 (9): 14903.（中科院 3区）

[17]Wang ZJ, Li QJ, Li Y, Huang LC, Lu L, Dao M, Li J, Ma E, Suresh S, Shan ZW. Sliding of coherent twin boundaries [J].Nature Communications, 2017, 8: 1108.（中科院 1区）

[18]Zhang FY, Gao PP, Tan H, Li Y, Chen YN, Mei M, Clare AT, Zhang LC, Tailoring grain morphology in Ti-6Al-3Mo through heterogeneous nucleation in directed energy deposition, Journal of Materials Science & Technology, 2021, 88, 132–142. （中科院 1区）

[19]Zhao D, Chen YN, Jiang CP, Li Y, Zhao QY, Xu YK, Zhan HF, Wan MP, Zhao YQ, Morphological evolution of Ti2Cu in Ti-13Cu-Al alloy after cooling from semi-solid state, Journal of Alloys and Compounds, 2020, 848, 156639. （中科院2区）

[20]Zhang FY*, Qiu Y, Hu TT, Clare AT, Li Y, Zhang LC, Microstructures and mechanical behavior of beta-type Ti-25V-15Cr-0.2Si titanium alloy coating by laser cladding, Materials Science & Engineering A, 2020, 796, 140063（中科院 1区）

[21]Chen K, Kunz M, Li Y, Zepeda-Alarcon E, Sintubin M, Wenk HR. Compressional residual stress in Bastogne boudins revealed by synchrotron X-ray microdiffraction [J]. Geophysical Research Letters, 2016, 43 (12): 6178–6185. （中科院 1区）

[22]Lupinacci A, Chen K, Li Y, Kunz M, Jiao Z, Was GS, Abad MD, Minor AM, Hosemann P. Characterization of ion beam irradiated 304 stainless steel utilizing nanoindentation and Laue microdiffraction [J]. Journal of Nuclear Materials, 2015, 458: 70–76. （中科院 1区）

[23]Shen H, Zhu W, Li Y, Tamura N, Chen K. In situ synchrotron study of electromigration induced grain rotations in Sn solder joints [J]. Scientific Reports, 2016, 6: 24418.（中科院 3区）

[24]Jackson MD, Mulcahy SR, Chen H, Li Y, Li Q, Cappelletti P, Wenk HR. Phillipsite and Al-tobermorite mineral cements produced through low-temperature water-rock reactions in Roman marine concrete [J]. American Mineralogist, 2017, 102 (7): 1435–1450.（中科院 3区）

[25]Zhou G, Zhu W, Shen H, Li Y, Zhang A, Tamura N, Chen K. Real-time microstructure imaging by Laue microdiffraction: A sample application in laser 3D printed Ni-based superalloys [J]. Scientific Reports, 2016, 6: 28144.（中科院 3区）

[26]Qian D, Zhang A, Zhu J, Li Y, Zhu W, Qi B, Tamura N, Li D, Song Z, Chen K. Hardness and microstructural inhomogeneity at the epitaxial interface of laser 3D-printed Ni-based superalloy [J]. Applied Physics Letters, 2016, 109 (10): 101907.（中科院 2区）

[27]Qian D, Xue J, Zhang A, Li Y, Tamura N, Song Z, Chen K. Statistical study of ductility-dip cracking induced plastic deformation in polycrystalline laser 3D printed Ni-based superalloy [J]. Scientific Reports, 2017, 7: 2859. （中科院 3区）

[28]李尧，杨浩，刘源，张勇，张凤英，一种激光熔覆原位合成钼-硅-硼合金涂层的方法，发明专利，中国：ZL202011536356.9，2022-08-02

[29]李尧，张勇，张凤英，陈永楠，一种适用于多相钼合金的纳米硬度测量方法，发明专利，中国：ZL201911058976.3，2021-07-23

[30]张凤英，黄开虎，高盼盼，胡腾腾，李尧，孙志平．一种面向激光增材制造应用的类TC4钛合金：发明专利，中国，ZL 202010462036.7，2021-07-23．

[31]李尧，杨浩，陈永楠，张凤英，电子背散射衍射实验数据可视化软件，软件著作权，登记号：2021SR0763413，2021-05-25

[32]李尧，刘源，陈永楠，张凤英，电子背散射衍射实验数据前处理软件，软件著作权，登记号：2021SR0763414，2021-05-25

[33]陈凯，李尧．同步辐射微束衍射实验数据处理软件[简称：XtalCAMP] V2.0：中国，软件著作权，登记号：2016SR060878．2016-03-23．

[34]陈凯，李尧．同步辐射微束衍射实验数据处理软件[简称：XtalCAMP] V1.0：中国，软件著作权，登记号：2015SR263332．2015-12-16．