可调式减压阀怎么调，请问可调式减压阀怎么调压视频介绍？

最近有很多热心网友都十分关心可调式减压阀怎么调，请问可调式减压阀怎么调压视频介绍？这个问题。还有一部分人想了解可调式减压阀怎么调压视频介绍。对此，绿润百科小编「﹏細雨輕愁〞」收集了相关的教程，希望能给你带来帮助。

可调式减压阀调节方法如下：

1、根据不同的使用工况下，在安装减压阀的管路中，需要安装一个过滤器，用来过滤管道中的渣滓，避免因潭滓而使得阀心卡住。

2、新安装管道及调试管道中，在可调式减压阀压力调节之前关闭减压阀前后的阀门，通过旁通管道充分清洗30分钟，把管道内的异物清除掉后，再关闭旁通管道，关闭出口处阀门，最后慢慢打开进口处阀门。

3、揭开可调式减压阀的罩，按顺时针方向调节螺栓出口压力上升，按逆时针方向旋转出口压力下降。

4、在确认出口压力达到设定压力之后，拧紧锁紧螺帽，固定调节螺栓，在安装阀罩。

可调式减压阀一定用在有高压的环境，因此操作的时候要特别小心，否则压力外泄将有安全隐患。

【英文介绍/For English】：

The adjustment method of the adjustable pressure reducing valve is as follows:

1. According to different working conditions, a filter needs to be installed in the pipeline where the pressure reducing valve is installed to filter the dross in the pipeline to avoid the valve core being stuck due to the dregs.

2. In the newly installed pipeline and the debugging pipeline, close the valves before and after the pressure reducing valve before adjusting the pressure of the adjustable pressure reducing valve, and fully clean the bypass pipeline for 30 minutes. After removing the foreign matter in the pipeline, close the bypass pipeline , close the outlet valve, and finally slowly open the inlet valve.

3. Uncover the cover of the adjustable pressure reducing valve, adjust the outlet pressure of the bolt clockwise to increase, and turn it counterclockwise to decrease the outlet pressure.

4. After confirming that the outlet pressure reaches the set pressure, tighten the locking nut, fix the adjusting bolt, and install the valve cover.

The adjustable pressure reducing valve must be used in an environment with high pressure, so special care must be taken when operating it, otherwise there will be safety hazards if the pressure leaks out.

声明：本站所有文章资源内容，如无特殊说明或标注，均为采集网络资源。如若本站内容侵犯了原著者的合法权益，可联系本站删除。如若转载，请注明出处：https://www.hbgreen.com.cn/news/2924882cd.html