武汉理工大学材料科学与工程学院欢迎您

Associate Proffessor: Jian Zhang

Address: No. 122 Luoshi Road, Hongshan District, Wuhan, 430070, P. R

Email： [email protected]            Tel: 15927131301

EDUCATION

2004. 09-2008. 06  B.S. in Material Chemistry School of Materials Science and Engineering, Wuhan University of Technology, China.

2008. 09-2010. 12  M.S. in Materials Science, School of Materials Science and Engineering, Wuhan University of Technology, China.

2010. 09- 2013. 06 PhD in Materials Science, school of Materials Science and Engineering, Wuhan University of Technology, China.

WORK EXPERIENCE

2013.07-2015. 06   Post Doctoral, Huazhong University of Science and Technology

2015.07-Present   Associate professor, State Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology

RESEARCH PROJECT

1. Preparation of porous tungsten with high porosity by step dealloying and its micro / nano pore structure control，National Natural Science Foundation of China.

2. Application verification of functionally graded materials under controllable strain rate loading, National key R & D sub project.

3. Ultrasonic assisted diffusion bonding technology for titanium/aluminum dissimilar metal materials, Field Fund.

SELECTED PUBLICATION

[1] Corrosion behaviour of AlN ceramics in LiF-LiCl-LiBr-Li molten salt at 500 °C. Corros Sci 190 (2021) 109672

[2] Achieving porous tungsten with high porosity by selective dissolution of W-Fe alloy. Scr. Mater., 198 (2021) 113830.

[3] Microstructure and mechanical properties of HfC reinforced W matrix composites regulated by trace Zr. Int. J. Refract. Met. H., 86 (2020) 15096.

[4] Y Li, GQ Luo, Y Sun, J Zhang*, Q Shen*, LM Zhang. Microstructure and mechanical properties investigation of W-Cu composites prepared from dual-layer coated powders, Appl. Surf. Sci., 516 (2020) 146098

[5] J Zhang, YY Hu, QQ Wei, Y Xiao, PA Chen, GQ Luo, Q Shen. Microstructure and mechanical properties of RexNbMoTaW highentropy alloys prepared by arc melting using metal powders. J. Alloy. Compd., 827 (2020) 154301.

PATENT

1. J Zhang, JW Zhu, KJ Kang, GQ Luo, Q Shen, LM Zhang. A W-B4C multi-phase composite and its arc melting manufacturing method. Chinese Patent No. ZL 201711337666.6

2. J Zhang, DQ Zhou, GQ Luo, Q Shen, LM Zhang. A micron size porous tungsten and its manufacturing method. Chinese Patent No. ZL 201710413422.5

3. Q Shen, J Zhang, GQ Luo, MJ Li, LM Zhang. The low temperature diffusion bonding method of magnesium alloy and aluminum alloy. Chinese Patent ZL No. 201010289606.3

4. LM Zhang, J Li, J Zhang, GQ Luo, Q Shen, CB Wang. The metal powder slurry of non-aqueous tape-casting and its manufacturing method. Chinese Patent ZL No. 200910061157.4

INTERNATIONAL CONFERENCE

1. Joining 304 stainless steel and TC4 alloy using Ag foil interlayer by plasma activated sintering. Chinese Materials Conference, 2017, Yinchuan, China (Oral Presentation)

2. Interlayer design and interfacial structure control of diffusion bonding for Mg/Al dissimilar metals. International Symposium on Functionally Graded Materials, Multiscale & Multifunctional structures, 2016, Bayreuth, Germany (Oral Presentation)

3. Microstructure characterization of the Mg/Cu/Al diffusion bonded joint. The 12th International Symposium on Multiscale, Multifunctional & Functionally Graded Materials, 2012, Beijing, China (Poster Presentation)