vbox虚拟机vdi文件用VMware打开 | 您所在的位置:网站首页 › 怎么打开vmware文件 › vbox虚拟机vdi文件用VMware打开 |
方法一: 使用VirtualBox 自带的VBoxManage来进行格式转换: 1、安装VBoxManage 2、使用VBoxManage格式转换指令转为Vmware能识别的(vmdk)格式 方法二: vdi转成VM虚拟机文件vmdk文件并生成vm虚拟机配置文件 1、vbox导出ova虚拟机文件 2、用VM虚拟机打开ova文件 方法三:我们将使用qemu-img工具。QEMU磁盘镜像工具(这个要在能开机的情况下开始,安装qemu-kvm可能导致virtualbox无法启动) 1、安装qemu-kvm 软件 2、修改已经建好的虚拟机,更改格式 ======================================================================== 方法一: 1.VBoxManage.exe在VirtualBox 安装目录下,如下图,我们进VirtualBox 安装目录查看到VBoxManage.exe
2.命令行进入VirtualBox目录,运行相关VBoxManage格式转换指令,语法如下: VBoxManage clonehd源硬盘格式文件 目录硬盘格式文件 --format目标格式后缀VBoxManageclonehd | [--format VDI|VMDK|VHD|RAW|] [--variant Standard,Fixed,Split2G,Stream,ESX] [--existing]
3.将VDI文件转成VHD文件,如下图命令将vdi的虚拟机文件转换成微软vhd虚拟机文件:
执行进度至100%结束完成转换,随后我们用微软虚拟机软件挂载顺利运行 至此,利用VBoxManage对三种常见虚拟硬盘格式转换介绍结束,vmdk、vhd转VDI等按格式套用即可。
方法二: xp.vdi转成VM虚拟机文件vmdk文件并生成vm虚拟机的配置文件vmx文件 1. virtal box 导入vdi文件 文件转换步骤 2.导出ova虚拟机文件 (1). ovf文件选择1.0格式。 (2). 2.0格式,第三步通不过。
(3). 用vmworkstaion打开ova文件
(4).打开step_2.vmx
在Ubuntu下可以很方便的安装 shily@hh-desktop:~# sudo apt-get install qemu-kvm 使用如下一个命令就可以轻松完成转换。 shily@hh-desktop:~# qemu-img convert -f vdi -O vmdk Winxp.vdi Winxp.vmdk 直接修改已经建好的虚拟机,(Ubuntu系统在~/vmware/)
例如我建立的虚拟机叫Win,则修改~/vmware/Win/Win.vmx,找到 ide0:0.fileName = "Win.vmdk"
把其中的Win.vmdk修改成你转换生成的文件名即可。 [注]: 1,Winxp.vdi要根据VitrualBox虚拟机的名称修改,在目录~/.VirtualBox/HardDisks下可以找到。 2,.vmx 是VMware虚拟机的配置文件,是一个文本文件可以直接修改,也可以在程序中更改,删除原来的硬盘,再添加转换后的硬盘。 ====================== shily@hh-desktop:~$ qemu-img qemu-img version 0.12.3, Copyright (c) 2004-2008 Fabrice Bellard usage: qemu-img command [command options] QEMU disk p_w_picpath utility Command syntax: check [-f fmt] filename create [-f fmt] [-o options] filename [size] commit [-f fmt] filename convert [-c] [-f fmt] [-O output_fmt] [-o options] filename [filename2[...]] output_filename info [-f fmt] filename snapshot [-l | -a snapshot | -c snapshot | -d snapshot] filename Command parameters: 'filename' is a disk p_w_picpath filename 'fmt' is the disk p_w_picpath format. It is guessed automatically in most cases 'size' is the disk p_w_picpath size in bytes. Optional suffixes 'k' or 'K' (kilobyte, 1024), 'M' (megabyte, 1024k), 'G' (gigabyte, 1024M) and T (terabyte, 1024G) are supported. 'b' is ignored. 'output_filename' is the destination disk p_w_picpath filename 'output_fmt' is the destination format 'options' is a comma separated list of format specific options in a name=value format. Use -o ? for an overview of the options supported bythe used format '-c' indicates that target p_w_picpath must be compressed (qcow format only) '-h' with or without a command shows this help and lists the supportedformats Parameters to snapshot subcommand: 'snapshot' is the name of the snapshot to create, apply or delete '-a' applies a snapshot (revert disk to saved state) '-c' creates a snapshot '-d' deletes a snapshot '-l' lists all snapshots in the given p_w_picpath Supported formats: cow qcow vdi vmdk cloop dmg bochs vpc vvfat qcow2parallels nbd host_cdrom host_floppy host_device raw tftp ftps ftp https http ====================== 参考: Howto ConvertVmware Image to Virtualbox Image or Import Vmware Image into Virtualbox ======================================警告: 安装qemu-kvm可能导致virtualbox无法启动,在我的机器上出现了如下提示: Failed to open a session for the virtual machine WinXP. VirtualBox can't operate in VMX root mode. Please disable the KVM kernelextension, recompile your kernel and reboot (VERR_VMX_IN_VMX_ROOT_MODE). Details: Result Code: NS_ERROR_FAILURE (0x80004005) Component: Console Interface: IConsole {6375231a-c17c-464b-92cb-ae9e128d71c3}
说 可能导致 的原因是系统环境比较复杂:安装在USB硬盘上,经常在T60p和Dell的740上工作,他们的 CPU一个是Intel、另外一个是AMD,在网上找到一个解决方案。 shily@hh-desktop:~$ sudo modprobe -r kvm_intel #因为我当前的CPU是Intel,你也可以直接使用sudo modprobe -r kvm来删除kvm模块,无论你使用什么样的CPU。 然后打开VirtualBox就可以了,但是你需要在每次重启开机后执行这个命令,如果你需要启动Vbox的话。 参照: VirtualBox can't operate in VMX rootmode.
|
CopyRight 2018-2019 实验室设备网 版权所有 |