在 Ubuntu20.04 上安装 python2 并设置为默认方式 | 您所在的位置:网站首页 › 怎么在ubuntu中安装python解析器 › 在 Ubuntu20.04 上安装 python2 并设置为默认方式 |
文章目录
1. 安装 Python22. 设置默认方式(替代版本)
1. 安装 Python2
可以到 Python 官网去下载安装包进行安装,也可以直接使用如下命令安装 Python2: $ sudo apt install python2安装完成后检查 Python 的版本,在这里我安装的 Python版本为 2.7.18: $ python2 -V Python 2.7.18一般 Ubuntu 是自带 python3 版本的: $ python3 -V Python 3.8.5安装完成后我们可以使用如下命令来检查目前可用的 Python 版本: $ ls /usr/bin/python*
首先查看是否已经配置了 Python 的默认方式(替代版本): $ sudo update-alternatives --list python若没有设置,会显示: update-alternatives: error: no alternatives for python若设置了,则是显示你替代的版本,可以以此确认你的备选方案是否可用: $ sudo update-alternatives --list python /usr/bin/python2 /usr/bin/python3然后使用如下命令设置默认方式(替代版本): $ sudo update-alternatives --install /usr/bin/python python /usr/bin/python2 1 $ sudo update-alternatives --install /usr/bin/python python /usr/bin/python3 2选用可选的 Python 版本: $ sudo update-alternatives --config python There are 2 choices for the alternative python (providing /usr/bin/python). Selection Path Priority Status ------------------------------------------------------------ * 0 /usr/bin/python3 2 auto mode 1 /usr/bin/python2 1 manual mode 2 /usr/bin/python3 2 manual mode Press to keep the current choice[*], or type selection number: 1在本例中,选择 1 来选择 Python2… 最后,你可以检查你的 Python 版本来确认是否设置成功: $ python -V Python 2.7.18安装 Python 之后,肯定需要安装 pip,关于在 Ubuntu 下如何安装 pip 可以参考我的这篇博客:Ubuntu 下安装 pip |
CopyRight 2018-2019 实验室设备网 版权所有 |