Fault Code 077 您所在的位置:网站首页 富士施乐077-113 Fault Code 077

Fault Code 077

2024-06-04 16:21| 来源: 网络整理| 查看: 265

Power off the Press. For details, refer to  Power On/Off the Press.

Open the front left and center doors.

Unlock and pull out the Transfer Drawer by turning the green 2 handle (at the center) to the right until it is in the horizontal position. Pull the drawer straight out until it stops.

Power on the press with the Transfer Drawer still pulled out.

When prompted by the machine to close the Transfer Drawer, close the drawer.

Grasp the green 2 handle and gently push in the Transfer Drawer completely. Turn the green handle to the left to lock the drawer in place.

Close the front left and center doors completely. The press will not operate if a door is open even slightly.

Try your job agian. If the problem persists, contact Support.



【本文地址】

公司简介

联系我们

今日新闻

    推荐新闻

      专题文章
        CopyRight 2018-2019 实验室设备网 版权所有