简单工厂模式和工厂方法模式

简单工厂模式和工厂方法模式

One of the most common steps when troubleshooting a PC is to boot into Safe Mode. For a long time this has been achieved by pressing the F8 key, this all changes with Windows 10 and its Automatic Repair mode. But what if we want Safe Mode?

对PC进行故障排除时，最常见的步骤之一就是启动进入安全模式。 长期以来，通过按F8键即可实现这一点，而Windows 10及其“自动修复”模式将改变所有这些情况。 但是，如果我们想要安全模式怎么办？

If you mash the F8 key at just the right time (or get lucky spamming the key during boot up), Windows might still take you to a screen that lets you get into the recovery environment. From there, you can boot into Safe Mode (and we’ll talk about that environment a bit later. The trouble is that some computer manufacturers disable this option. And even on PCs that still support it, Windows startup (and particularly the handoff between the regular boot process and Windows startup) happens so much faster now, you barely have time to press the key.

如果您在正确的时间将F8密钥捣碎(或者在启动过程中很幸运地向其发送了垃圾邮件)，Windows 可能仍会带您进入一个使您进入恢复环境的屏幕。 从那里，您可以启动到安全模式(稍后我们将讨论该环境。问题是某些计算机制造商禁用了此选项。即使在仍支持该选项的PC上，Windows也可以启动(尤其是在现在，常规启动过程和Windows启动)的速度变得如此之快，您几乎没有时间按下该键。

The good news is that getting into Safe Mode is doable. The process is just more hidden now.

好消息是进入安全模式是可行的。 现在该过程更加隐蔽。

Note: This article is written using screenshots from Windows 10, but the techniques work pretty much the same way in Windows 8. We’ll note any differences where they occur.

注意 ：本文是使用Windows 10的屏幕快照编写的，但是这些技术在Windows 8中的工作方式几乎相同。我们会注意到它们的发生之处。

Most of the ways you access Safe Mode involve getting into the Windows recovery environment first. The recovery environment includes a number of troubleshooting options, and Safe Mode is one of them. How you get there depends on whether your PC can start Windows normally or not.

访问安全模式的大多数方式都涉及先进入Windows恢复环境。 恢复环境包括许多故障排除选项，安全模式就是其中之一。 如何到达那里取决于您的PC是否可以正常启动Windows。