华为防火墙USG基本配置

拓扑图：

交换机配置（LAV1）：

vlan batch 10 20 100  //建立VLANinterface GigabitEthernet0/0/1 //配置端口为ACCESS与所属VLAN port link-type access port default vlan 10

interface GigabitEthernet0/0/2 port link-type access port default vlan 20

interface GigabitEthernet0/0/3 port link-type access port default vlan 100

interface GigabitEthernet0/0/23 //配置trunk与允许VLAN,华为默认trunk不允许任何VLAN通过。 port link-type trunk port trunk allow-pass vlan 10 20

interface GigabitEthernet0/0/24 port link-type access port default vlan 100

AR1配置：

interface GigabitEthernet0/0/0 ip address 202.1.1.1 255.255.255.0

ip route-static 0.0.0.0 0.0.0.0 202.1.1.254AR2配置：

interface GigabitEthernet0/0/0 ip address 192.168.1.1 255.255.255.0

ip route-static 0.0.0.0 0.0.0.0 192.168.1.254AR3配置：

interface GigabitEthernet0/0/0 ip address 10.1.1.1 255.255.255.0

ip route-static 0.0.0.0 0.0.0.0 10.1.1.254

防火墙配置：

interface GigabitEthernet0/0/1.10 vlan-type dot1q 10 alias GigabitEthernet0/0/1.10 ip address 202.1.1.254 255.255.255.0

interface GigabitEthernet0/0/1.20 vlan-type dot1q 20 alias GigabitEthernet0/0/1.20 ip address 192.168.1.254 255.255.255.0

interface GigabitEthernet0/0/2 ip address 10.1.1.254 255.255.255.0#配置trust ZONE包含的端口firewall zone trust set priority 85 add interface GigabitEthernet0/0/0 add interface GigabitEthernet0/0/2#配置untrust ZONE包含的端口firewall zone untrust set priority 5 add interface GigabitEthernet0/0/1.10#配置DMZ ZONE包含的端口firewall zone dmz set priority 50 add interface GigabitEthernet0/0/1.20#配置策略policy interzone trust untrust outbound policy 0  action permit  policy source 10.1.1.0 mask 255.255.255.0