Black群晖VideoStation不支持音频 DTS\EAC3\TureHD的解决办法

2024-07-10 08:30| 来源: 网络整理| 查看: 265

前几天自己手贱，更新了VideoStation，更新完又回到不支持 DTS格式的情况，之前修复的方法又没做笔记，所以这次把笔记做好，防止下次！

1、安装或更新完VideoStation后，接着安装ffmpeg（我安装的是4.4.4.49），再安装Media Extensions；

2、停用VideoStation；

3、到控制面板里面打开ssh；

4、用电脑ssh远程连接到群晖上；

5、获取su权限sudo -i，输入后回车再输一次密码；

6、依次执行以下命令：如果第二条命令执行失败，请看完解决办法后再继续执行下面的几条命令。

#重名备份ffmpeg41为ffmpeg41.orig mv /var/packages/CodecPack/target/pack/bin/ffmpeg41 /var/packages/CodecPack/target/pack/bin/ffmpeg41.orig # 这里可能因为无法访问 github 失败，下面又解决办法，请看完再继续下面的命令 wget -O - https://raw.githubusercontent.com/Rootjhon/Synology_Enhance/main/VideoStation/DSM7_1/ffmpeg41-wrapper > /var/packages/CodecPack/target/pack/bin/ffmpeg41 #修改ffmpeg41 权限 chmod 755 /var/packages/CodecPack/target/pack/bin/ffmpeg41 #重名备份libsynovte.so 为libsynovte.so.orig cp -n /var/packages/VideoStation/target/lib/libsynovte.so /var/packages/VideoStation/target/lib/libsynovte.so.orig #修改libsynovte.so.orig的用户组权限 chown VideoStation:VideoStation /var/packages/VideoStation/target/lib/libsynovte.so.orig #设置解码 sudo sed -i -e 's/eac3/3cae/' -e 's/dts/std/' -e 's/truehd/dheurt/' /var/packages/VideoStation/target/lib/libsynovte.so #重启VideoStation sudo synopkg restart VideoStation

好了，如果你顺利执行上面的命令，那恭喜你，应该解决了。如果第二条命令执行失败，往下看。

现在说说第二条命令，这条命令是把https://raw.githubusercontent.com/Rootjhon/Synology_Enhance/main/VideoStation/DSM7_1/ffmpeg41-wrapper脚本下载到/var/packages/CodecPack/target/pack/bin/并命名为ffmpeg41。由于git被墙了，除非有梯子，要不然没办法。哈哈~~不过我已经把上面的脚本下载下来了，继续往下看怎么解决。

1、在/var/packages/CodecPack/target/pack/bin/下创建ffmpeg41，执行下面命令：

vim /var/packages/CodecPack/target/pack/bin/ffmpeg41

2、复制下面代码，粘贴上去：

#!/bin/bash # Fork from code of BenjaminPoncet rev.12 with some revisions and little fixes. rev="AME_12.3.1" _log(){ echo "$(date '+%Y-%m-%d %H:%M:%S') - ${streamid} - $1" >> /tmp/ffmpeg.log } _log_para(){ echo "$1" | fold -w 120 | sed "s/^.*$/$(date '+%Y-%m-%d %H:%M:%S') - ${streamid} - = &/" >> /tmp/ffmpeg.log } _term(){ rm /tmp/ffmpeg-${streamid}.stderr _log "*** KILLCHILD ***" kill -TERM "$childpid" 2>/dev/null } trap _term SIGTERM arch=`uname -a | sed 's/.*synology_//' | cut -d '_' -f 1` nas=`uname -a | sed 's/.*synology_//' | cut -d '_' -f 2` pid=$$ paramvs=$@ stream="${@: -1}" streamid="FFM$pid" bin1=/var/packages/CodecPack/target/pack/bin/ffmpeg41.orig bin2=/var/packages/ffmpeg/target/bin/ffmpeg args=() vcodec="KO" while [[ $# -gt 0 ]] do case "$1" in -i) shift movie="$1" args+=("-i" "$1") ;; -hwaccel) shift hwaccel="$1" args+=("-hwaccel" "$1") ;; -scodec) shift scodec="$1" args+=("-scodec" "$1") ;; -f) shift fcodec="$1" args+=("-f" "$1") ;; -map) shift args+=("-map" "$1") idmap=`echo $1 | cut -d : -f 2` if [ "$vcodec" = "KO" ]; then vcodec=`/var/packages/ffmpeg/target/bin/ffprobe -v error -select_streams $idmap -show_entries stream=codec_name -of default=noprint_wrappers=1:nokey=1 "$movie" | head -n 1` vcodecprofile=`/var/packages/ffmpeg/target/bin/ffprobe -v error -select_streams $idmap -show_entries stream=profile -of default=noprint_wrappers=1:nokey=1 "$movie" | head -n 1` else acodec=`/var/packages/ffmpeg/target/bin/ffprobe -v error -select_streams $idmap -show_entries stream=codec_name -of default=noprint_wrappers=1:nokey=1 "$movie" | head -n 1` fi ;; *) args+=("$1") ;; esac shift done _log "*** PROCESS START REV $rev DS$nas ($arch) PID $pid ***" _log "MOVIE = $movie" set -- "${args[@]}" argsnew=() args1sv=() args2sv=() args1vs=() args2vs=() while [[ $# -gt 0 ]] do case "$1" in -ss) shift argsnew+=("-ss" "$1") args1sv+=("-ss" "$1") args1sv+=("-noaccurate_seek") args1vs+=("-ss" "$1") args1vs+=("-noaccurate_seek") args2sv+=("-analyzeduration" "10000000") args2vs+=("-analyzeduration" "10000000") ;; -i) shift argsnew+=("-i" "$1") args1sv+=("-i" "$1") args2sv+=("-i" "pipe:0" "-map" "0") args1vs+=("-i" "$1") args2vs+=("-i" "pipe:0" "-map" "0") ;; -vf) shift if [ "$hwaccel" = "vaapi" ] && [ "$vcodecprofile" = "Main 10" ]; then scale_w=`echo "${1}" | sed -e 's/.*=w=//g' | sed -e 's/:h=.*//g'` scale_h=`echo "${1}" | sed -e 's/.*:h=//g'` if let ${scale_w} AND let ${scale_h}; then argsnew+=("-vf" "scale_vaapi=w=${scale_w}:h=${scale_h}:format=nv12,hwupload,setsar=sar=1") else argsnew+=("-vf" "scale_vaapi=format=nv12,hwupload,setsar=sar=1") fi else argsnew+=("-vf" "$1") fi args2sv+=("-vf" "$1") args1vs+=("-vf" "$1") ;; # Para activar los límites de Bitrate que trae el VideoStation. Si se quieren fijar siempre a un valor, cambiar el $1 y poner 8M por ejemplo. -vb) shift argsnew+=("-vb" "$1") args1sv+=("-vb" "$1") args2sv+=("-vb" "$1") args1vs+=("-vb" "$1") args2vs+=("-vb" "$1") ;; -vcodec) shift argsnew+=("-vcodec" "$1") args1sv+=("-vcodec" "copy") args2sv+=("-vcodec" "$1") args1vs+=("-vcodec" "$1") args2vs+=("-vcodec" "copy") ;; -acodec) shift if [ "$1" = "libfaac" ]; then argsnew+=("-acodec" "aac") args1sv+=("-acodec" "aac") args2vs+=("-acodec" "aac") else argsnew+=("-acodec" "$1") args1sv+=("-acodec" "$1") args2vs+=("-acodec" "$1") fi args2sv+=("-acodec" "copy") args1vs+=("-acodec" "copy") ;; -ab) shift argsnew+=("-ab" "$1") args1sv+=("-ab" "$1") args2vs+=("-ab" "$1") ;; -ac) shift argsnew+=("-ac" "$1") args1sv+=("-ac" "$1") args2vs+=("-ac" "$1") ;; -f) shift argsnew+=("-f" "$1") args1sv+=("-f" "mpegts") args2sv+=("-f" "$1") args1vs+=("-f" "mpegts") args2vs+=("-f" "$1") ;; -segment_format) shift argsnew+=("-segment_format" "$1") args2vs+=("-segment_format" "$1") args2sv+=("-segment_format" "$1") ;; -segment_list_type) shift argsnew+=("-segment_list_type" "$1") args2vs+=("-segment_list_type" "$1") args2sv+=("-segment_list_type" "$1") ;; -hls_seek_time) shift argsnew+=("-hls_seek_time" "$1") args2vs+=("-hls_seek_time" "$1") args2sv+=("-hls_seek_time" "$1") ;; -segment_time) shift argsnew+=("-segment_time" "$1") args2vs+=("-segment_time" "$1") args2sv+=("-segment_time" "$1") ;; -segment_time_delta) shift argsnew+=("-segment_time_delta" "$1") args2vs+=("-segment_time_delta" "$1") args2sv+=("-segment_time_delta" "$1") ;; -segment_start_number) shift argsnew+=("-segment_start_number" "$1") args2vs+=("-segment_start_number" "$1") args2sv+=("-segment_start_number" "$1") ;; -individual_header_trailer) shift argsnew+=("-individual_header_trailer" "$1") args2vs+=("-individual_header_trailer" "$1") args2sv+=("-individual_header_trailer" "$1") ;; -avoid_negative_ts) shift argsnew+=("-avoid_negative_ts" "$1") args2vs+=("-avoid_negative_ts" "$1") args2sv+=("-avoid_negative_ts" "$1") ;; -break_non_keyframes) shift argsnew+=("-break_non_keyframes" "$1") args2vs+=("-break_non_keyframes" "$1") args2sv+=("-break_non_keyframes" "$1") ;; -max_muxing_queue_size) shift args2vs+=("-max_muxing_queue_size" "$1") args2sv+=("-max_muxing_queue_size" "$1") ;; -map) shift argsnew+=("-map" "$1") args1sv+=("-map" "$1") args1vs+=("-map" "$1") ;; *) argsnew+=("$1") if [ "$stream" = "$1" ]; then args1sv+=("-bufsize" "8192k" "pipe:1") args2sv+=("$1") args1vs+=("-bufsize" "8192k" "pipe:1") args2vs+=("$1") else args2sv+=("$1") args1vs+=("$1") args2vs+=("$1") fi ;; esac shift done sed -i -e "s/{\"PID\":${pid},\"hardware_transcode\":true,/{\"PID\":${pid},\"hardware_transcode\":false,/" /tmp/VideoStation/enabled startexectime=`date +%s` if [ "$scodec" = "subrip" ]; then _log "FFMPEG = $bin1" _log "CODEC = $scodec" _log "PARAMVS =" _log_para "$paramvs" $bin1 "${args[@]}" 2> /tmp/ffmpeg-${streamid}.stderr & elif [ "$fcodec" = "mjpeg" ]; then _log "FFMPEG = $bin1" _log "CODEC = $fcodec" _log "PARAMVS =" _log_para "$paramvs" $bin1 "${args[@]}" 2> /tmp/ffmpeg-${streamid}.stderr & else _log "VCODEC = $vcodec ($vcodecprofile)" _log "ACODEC = $acodec" _log "PARAMVS =" _log_para "$paramvs" _log "MODE = ORIG" _log "FFMPEG = $bin1" _log "PARAMWP =" param1=${argsnew[@]} _log_para "$param1" $bin1 "${argsnew[@]}" 2> /tmp/ffmpeg-${streamid}.stderr & fi childpid=$! _log "CHILDPID = $childpid" wait $childpid if grep "Conversion failed!" /tmp/ffmpeg-${streamid}.stderr || grep "not found for input stream" /tmp/ffmpeg-${streamid}.stderr || grep "Error opening filters!" /tmp/ffmpeg-${streamid}.stderr || grep "Unrecognized option" /tmp/ffmpeg-${streamid}.stderr || grep "Invalid data found when processing input" /tmp/ffmpeg-${streamid}.stderr; then _log "*** CHILD END ***" startexectime=`date +%s` _log "STDOUT =" _log_para "`tail -n 15 /tmp/ffmpeg-${streamid}.stderr`" # _log_para "`cat /tmp/ffmpeg-${streamid}.stderr`" _log "MODE = PIPE V_ORIG-A_WRAP" _log "FFMPEG1 = $bin1" _log "FFMPEG2 = $bin2" _log "PARAM1 =" param1=${args1vs[@]} _log_para "$param1" _log "PARAM2 =" param2=${args2vs[@]} _log_para "$param2" $bin1 "${args1vs[@]}" | $bin2 "${args2vs[@]}" 2> /tmp/ffmpeg-${streamid}.stderr & childpid=$! _log "CHILDPID = $childpid" wait $childpid fi if grep "Conversion failed!" /tmp/ffmpeg-${streamid}.stderr || grep "not found for input stream" /tmp/ffmpeg-${streamid}.stderr || grep "Error opening filters!" /tmp/ffmpeg-${streamid}.stderr || grep "Unrecognized option" /tmp/ffmpeg-${streamid}.stderr || grep "Invalid data found when processing input" /tmp/ffmpeg-${streamid}.stderr; then _log "*** CHILD END ***" startexectime=`date +%s` _log "STDOUT =" _log_para "`tail -n 15 /tmp/ffmpeg-${streamid}.stderr`" # _log_para "`cat /tmp/ffmpeg-${streamid}.stderr`" _log "MODE = PIPE V_WRAP-A_ORIG" _log "FFMPEG1 = $bin2" _log "FFMPEG2 = $bin1" _log "PARAM1 =" param1=${args1sv[@]} _log_para "$param1" _log "PARAM2 =" param2=${args2sv[@]} _log_para "$param2" $bin2 "${args1sv[@]}" | $bin1 "${args2sv[@]}" 2> /tmp/ffmpeg-${streamid}.stderr & childpid=$! _log "CHILDPID = $childpid" wait $childpid fi if grep "Conversion failed!" /tmp/ffmpeg-${streamid}.stderr || grep "not found for input stream" /tmp/ffmpeg-${streamid}.stderr || grep "Error opening filters!" /tmp/ffmpeg-${streamid}.stderr || grep "Unrecognized option" /tmp/ffmpeg-${streamid}.stderr || grep "Invalid data found when processing input" /tmp/ffmpeg-${streamid}.stderr; then _log "*** CHILD END ***" startexectime=`date +%s` _log "STDOUT =" _log_para "`tail -n 15 /tmp/ffmpeg-${streamid}.stderr`" # _log_para "`cat /tmp/ffmpeg-${streamid}.stderr`" _log "MODE = WRAPPER" _log "FFMPEG = $bin2" $bin2 "${args[@]}" 2> /tmp/ffmpeg-${streamid}.stderr & childpid=$! _log "CHILDPID = $childpid" wait $childpid fi stopexectime=`date +%s` if test $((stopexectime-startexectime)) -lt 10; then _log "STDOUT =" _log_para "`tail -n 22 /tmp/ffmpeg-${streamid}.stderr`" # _log_para "`cat /tmp/ffmpeg-${streamid}.stderr`" fi _log "*** CHILD END ***" _log "*** PROCESS END ***" rm /tmp/ffmpeg-*.stderr

3、按esc键退出编辑模式，输入:wq保存退出，然后继续上面的命令完成即可。

收工！

【本文地址】

公司简介

联系我们