Debian下一个网卡绑定多个ip的方法 您所在的位置:网站首页 一个网卡配置多个ip地址怎么设置 Debian下一个网卡绑定多个ip的方法

Debian下一个网卡绑定多个ip的方法

2023-09-06 21:20| 来源: 网络整理| 查看: 265

Debian 下一个网卡 绑 定多个 ip 的方法 File: /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface # auto lo表示开机时候自动加载一块叫lo的interface auto lo #定义lo这个interface的类型为loopback类型(本地环回# 接口) iface lo inet loopback # 自动加载叫eth0的interface auto eth0 # The primary network interface # eth0是个具备静态地址的interface iface eth0 inet static #ip地址 address 192.168.1.254 #子网掩码 netmask 255.255.255.0 #综合network和netmask的值来表示一个网络192.168.1.254/24 network 192.168.1.0 #broadcast表示广播地址 broadcast 192.168.1.255 #gateway表示网关地址 gateway 192.168.1.1 # dns-* options are implemented by the resolvconf package, if installed #DNS服务器地址 dns-nameservers 202.103.0.117 202.103.24.68 # DNS服务器地址一般在另外的一个文档里面配置,文档地址是 /etc/resolv.conf Debian下一个网卡绑定多个ip的方法(NetDC) 修改/etc/network/interfaces auto eth0 iface eth0 inet static address 172.16.3.123 netmask 255.255.255.0 network 172.16.3.0 broadcast 172.16.3.255 gateway 172.16.3.1 auto eth0:1 iface eth0:1 inet static address 10.16.3.123 netmask 255.255.0.0 network 10.16.0.0 broadcast 10.16.255.255

File:/etc/network/ifstate lo=lo eth0=eth0 eth0:1=eth0:1 没有文档/etc/network/ifstate,手工创建之 #/etc/init.d/networking restart 注意,eth0:0没有gateway 然后使用ifup eth0:0就能够了。 不要使用/etc/init.d/network restart的方法



【本文地址】

公司简介

联系我们

今日新闻

    推荐新闻

      专题文章
        CopyRight 2018-2019 实验室设备网 版权所有