Striker extreme usb 2.0 connectors usb56, Usb78, Usb910 | 您所在的位置:网站首页 › usb78和usb910 › Striker extreme usb 2.0 connectors usb56, Usb78, Usb910 |
2-32 Chapter 2: Hardware information Connect the right-angle side of SATA signal cable to the SATA device, or connect the right-angle side of the SATA cable to the onboard SATA port to avoid mechanical conflict with huge graphics cards. Right-angle side 4. USB connectors (10-1 pin USB56, USB78, USB910) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the USB cable to ASUS Q-Connector (USB, blue) first, and then install the Q-Connector (USB) to the USB connector onboard. STRIKER EXTREME ® STRIKER EXTREME USB 2.0 connectors USB56 NC GND USB_P6+ USB_P6- USB+5V GND USB_P5+ USB_P5- USB+5V 1 USB78 NC GND USB_P8+ USB_P8- USB+5V GND USB_P7+ USB_P7- USB+5V 1 USB910 1 NC GND USB_P6+ USB_P6- USB+5V GND USB_P5+ USB_P5- USB+5V |
CopyRight 2018-2019 实验室设备网 版权所有 |