TN | 您所在的位置:网站首页 › intouch作为opcserver › TN |
Description
This article from InSource shows how to enable and setup InTouch as a OPA UA Server Author: Lewis Talley Published: 06/27/2022 Applies to: 2020 R2Details To enable OPC UA in InTouch is done from the application manager as shown below: Next we will need to configure the OPC UA Client. For Wonderware products, this is done via the SMC: Note that the first image I clicked the test button on purpose with configuration mis matches to show what happens when you are unable to connect:
after the configuration is saved, you should be able to access the DeviceGroup (below the OPCUA configuration) as shown and be able to add device items by browsing: |
CopyRight 2018-2019 实验室设备网 版权所有 |