ICS | 您所在的位置:网站首页 › ics5000离子色谱仪检出限 › ICS |
压力范围: 分析: 0–35 MPa (0–5000 psi) 毛细管:0–41 MPa (0–6000 psi) 流量范围: 分析:0.000-10.000 mL / min的流量,增量可设置在0.001mL / min,无需改变泵头 毛细管:0.001-0.100mL / min的流量,增量可设置在0.0001mL / min,典型的工作范围为5-30μL / min的流量增量 流量准确度: 流量精度: 压力波动: 真空脱气(分析和毛细管):集成,可选1元泵通道或4通道四元泵 活塞密封清洗:标准,自动操作 RFIC-EG梯度 分析:0.1-100mM 毛细管:0.1-200mM 梯度配比准确度和精密度(分析):±0.5,在2mL / min 尺寸:41×23×56厘米(16×8.75×21.5英寸) 重量SP:20.4公斤(45磅) - DP:24.1(55磅) 更多参数:
Dionex iCS-5000+ 单泵和双泵指标 泵 类型 串联双活塞泵,微处理器控制,稳定冲程,可变流速,具有zl技术的等动力淋洗液预混功能,无需使用阻尼器 结构 泵头及所以接触淋洗液的部件均采用具有化学惰性的PEEK材质,可兼容反相有机溶剂及pH 0-14的溶液 耐压范围: 0–35 MPa (0–5000 psi) (分析型) 0–41 MPa (0-6000 psi) (毛细管型) 流速范围: 分析型:0.000–10.000 mL/min,增幅0.001 mL/min 毛细管型:0.001–0.100 mL/min,zei高可达3.000 mL/min,增幅0.0001 mL/min 流速精度: 流速准确度: 压力波动: 加压:无需加压 真空脱气:内置真空脱气,单通道(等度泵)或四通道(四元梯度泵) 活塞密封清洗:标准配置,自动运行 梯度产生方式:四元低压梯度或电解淋洗液在线产生高压梯度 梯度类型:可产生线性、非线性、抛物线等多种形式的梯度 梯度比例精度和准确度:±0.5% 梯度混合:主动梯度混合器(选配) Pump泵 Type Dual-piston (in series), microprocessor controlled, constant stroke, variable speed, patented Isokinetic Eluent Precompression Construction Chemically inert, metal-free PEEK pump heads and flow path; compatible with aqueous eluents from pH 0–14 and reversed-phase solvents
Pressure Range Analytical: 0–35 MPa (0–5000 psi) Capillary: 0–41 MPa (0–6000 psi) Flow Rate Range Analytical: 0.000–10.000 mL/min with settable flow increments at 0.001 mL/min, without changing pump heads Capillary: 0.001–0.100 mL/min flow rate and up to 3.000 mL/min for pump priming mL/min with settable flow increments at 0.0001 mL/min, typical working range of 5–30 µL/min Flow Rate Precision (Analytical and Capillary) Flow Rate Accuracy Pressure Ripple Pressure None required Vacuum Degasser (Analytical and Capillary) Integrated, optional 1 channel for isocratic pump or 4 channel for quaternary pump Piston Seal Wash Standard, automatic operation Gradient Formation (Analytical and Capillary) Quaternary low pressure (analytical only) or electrolytic eluent generation at high pressure
RFIC-EG梯度: 分析:0.1–100 mM 毛细管:0.1–200 mM 梯度疲惫准确度:±0.5 at 2 mL/min
RFIC-EG Gradients Analytical: 0.1–100 mM Capillary: 0.1–200 mM Gradient Profiles Any combination of an unlimited number of linear, convex, and concave positive and negative gradient profiles Gradient Proportioning Accuracy ±0.5 at 2 mL/min and Precision (Analytical Only) Gradient Mixing (Analytical Only) Passive mixers for 2 mm and 4 mm i.d. columns, optional Eluent Generation (Analytical and Capillary) Optional eluent generation (RFIC-EG) Eluent On/Off Valve Electrically actuated, standard Leak Sensor Optical, standard System Software Software Chromeleon Chromatography Data System software, supports Microsoft ® Windows ® 7, Windows Vista ® , and Windows XP ® operating systems Automated Procedure Wizards Standard feature System Smart Startup and Shutdown Standard feature Application Templates Standard feature Automation Support of 3rd Party Instruments Fully controls over 300 different instruments from more than 30 manufacturers, including GC, HPLC, and MS Customizable System Control Panels Standard feature Signal Channels Pump pressure Data Trending Plots All numerical device parameters System Status Virtual Channels Standard feature Power Failure Protection Standard feature System Trigger Commands and Contitionals Standard feature Daily Audit Trail Standard feature Sample Audit Trail Standard feature System Calibration Storage Factory, present and previous. Completely user selectable Customized Reporting Standard feature with unlimited report workbooks GLP Compliance Optional
Physical Specifications Power Requirements 90–265 V ac, 47–63 Hz Dimensions (h × w × d) 41 × 23 × 56 cm (16 × 8.75 × 21.5 in.) Weight SP: 20.4 kg (45 lb) — DP: 24.1 (55 lb) Flow Path: All polymeric (PEEK), anion or cation configuration11 EG淋洗液自动发生装置 zei小和zei大分析:0.1–100 mM 淋洗液浓度范围毛细管:0.01-200mM 流速范围:分析0.0–3.000 mL/min;毛细管:0.001–0.030 mL/min 淋洗液类型:分析: KOH, LiOH, NaOH; Carbonate; Carbonate/Bicarbonate; MSA 毛细管: KOH, MSA zei大操作压力:分析: Dionex EGC III: 21 MPa (3000 psi); Dionex EGC 500: 35 MPa (5000 psi) 毛细管: 35 MPa (5000 psi) 有机物zei大浓度:阳离子:不允许有有机溶剂存在;阴离子:能耐受25%的甲醇 淋洗液罐的数量:支持两个淋洗液罐的同时使用 电源条件:90–265 V ac, 47–63 Hz 尺寸(h×w×d) :41×23 ×56 cm(16×8.75×21.5in.) 重量:25 kg(40 lb)(不带选配件下) Dionex iCS-5000+ eg eluent generator specifications Minimum and Maximum Analytical: 0.1–100 mM Eluent Concentration Capillary: 0.1–200 mM Flow Rates Analytical: 0.1–3.000 mL/min;Capillary: 0.001–0.030 mL/min Eluent Types Analytical: KOH, LiOH, NaOH; Carbonate; Carbonate/Bicarbonate; MSA Capillary: KOH, MSA Maximum Operating Pressure Analytical: Dionex EGC III: 21 MPa (3000 psi); Dionex EGC 500: 35 MPa (5000 psi) Capillary: 35 MPa (5000 psi) Maximum Solvent Concentration Cations: None (Analytical and Capillary) Anions: 25% methanol (KOH, NaOH and LiOH cartridges); None (Carbonate cartridge and EPM) Gradient Profiles Standard - any combination of an unlimited number of linear, convex and concave positive and negative gradient profiles Number of Cartridges Supported Two–dual cartridge support RFIC Eluent Degasser (Analytical only) Eluent degasser housed in the EG Module
System Software Software Chromeleon Chromatography Data System software, supports Microsoft Windows 7, Windows Vista, and Windows XP operating systems Automated Procedure Wizards Standard feature System Smart Startup and Shutdown Standard feature Application Templates Standard feature Automation Support of 3rd Party Instruments Fully controls over 300 different instruments from more than 30 manufacturers, including GC, HPLC, and MS Customizable System Control Panels Standard feature Signal Channels Eluent concentration Data Trending Plots Device numerical parameters plotted System Status Virtual Channels Standard feature Power Failure Protection Standard feature System Trigger Commands and Contitionals Standard feature Daily Audit Trail Standard feature Sample Audit Trail Standard feature Eluent Cartridge Information Storage Serial number and expiration date Customized Reporting Standard feature with unlimited report workbooks GLP Compliance Optional package provides security, modification history, and electronic signatures
Physical Specifications Power Requirements 90–265 V ac, 47–63 Hz Dimensions (h × w × d) 41 × 23 × 56 cm (16 × 8.75 × 21.5 in.) Weight 25 kg (40 lb) without optional items Flow Path All polymeric (PEEK), anion or cation configuration
Dionex iCS-5000+ er eluent regeneration SPeCifiCationS (analytiCal) Eluents Carbonate and carbonate/bicarbonate combinations up to 20 mM MSA up to 34 mM Flow Rates 1.00–2.00 mL/min Continuous Operation with 4 L of Eluent Up to 28 days or 2000 samples, typically Always on, Always Ready Capable Standard feature Remains Fully Calibrated for Extended Standard feature, results are traceable to a single calibration Periods of Time (≤ 28 Days): System Wellness Consumables usage monitoring for predictive maintenance Maximum Operating Pressure 21 MPa (3000 psi) Operating Temperature Range 4–40 °C
Dionex iCS-5000+ DC DeteCtor/ChromatograPhy ComPartment SPeCifiCationS Dual Temperature Zone Model Upper Zone Temp. Range: 10–40 °C (minimum temperature: ambient -15 °C); (maximum temperature: ambient +20 °C) Lower Zone Temp. Range: 10–70 °C (minimum temperature: ambient -15 °C) (maximum temperature: ambient +50 °C) Temperature Accuracy: ±0.5 °C Temperature Stability: ±0.2 °C Temperature Precision: ±0.2 °C Lower Zone (Analytical) Injection Valves: Up to two high-pressure valves,either 6- or 10-port, 2-position Low Pressure Valves: Up to 2 inert, 2- or 3-way Reaction Coil Heater (RCH): Holds two reaction coils RCH Temperature Range: 5 °C above upper zone, 80 °C maximum AutoPrep Kit: Dual loop for sample preconcentration All valves and heater upgradable and field installable Automation Manager Injection Valves: Up to two high-pressure valves, either 6- or 10-port, 2-position (Optional - Analytical Only) Low Pressure Valves: Up to 2 inert, 2- or 3-way Reaction Coil Heater (RCH): Holds two reaction coils RCH Temperature Range: 5 °C above upper zone, 80 °C maximum AutoPrep Kit: Dual loop for sample preconcentration All valves and heater upgradable and field installable Capillary IC Cube One or two IC Cube modules holding the following: (Optional - but required for Injection Valves: Up to two (one per cube) high-pressure valves, 4-port, 2-position. An optional capillary chemistries) 6-port, 2-position valve is available to support large loop and concentrator applications
EG Degasser Column and Guard Carbonate Removal Device Capillary Suppressor (See Suppressor section) IC Cubes and cartridges are customer installable with pre-formed tubing and color-coded labeling Capillary column heater 15 to 85 °C) Flow Path Plumbing configurations for 4 mm, 2 mm, and 0.4 mm columns, fully inert, PEEK Detectors Any combination of two conductivity or electrochemical detectors, upgradeable and field installable. Dual detectors can be operated simultaneously or independently. Optional remote operation up to 3 m from instrument. Analog Signal Output Two analog output channels, two 24 V relays, 2 TTL Out and 8 TTL In lines, upgradable and field installable, optional Leak Detection Optical leak sensor standard Application Control Automation Standard. All DC modules come equipped with two switched AC controllers built-in to automate external devices and the ability to control up to six low pressure 2-way or 3-way valves for fluidic automation
Suppression Non-Suppressed Conductivity Supported - both anion and cation Suppressor Wear Parts None. No valves, pumps, peristaltic pump tubing, or inline filters required Chemical Suppression 2 mm and 4 mm anion and cation membrane suppression available Displacement Chemical Suppression 2 mm and 4 mm anion and cation membrane suppression available Electrolytic Suppression, Self-Regenerating 0.4 mm (with optional IC Cube) 2 mm and 4 mm anion and cation. Membrane and MonoDisc suppression bed types available. Membrane for capillary (0.4 mm) suppressor Electrolytic Suppression, Self-Regenerating, 0.4 mm (with optional IC Cube) 2 mm and 4 mm anion and cation. Membrane and MonoDisc External Water Mode suppression bed types available for 4 mm and 2 mm. Membrane for capillary (0.4 mm) suppressor Salt Converter Available in 2 and 4 mm versions Dionex AMMS-ICE Available in 9 mm version Carbonic Acid Removal for Anions Thermo Scientific Dionex ASRS ™ 300 or Dionex AMMS ™ 300 plus Dionex CRD 200 and CRD 300 for 2 and 4 mm versions, Dionex ACES ™ 300 plus Dionex CRD 200 (0.4 mm) for capillary suppressors13
Dionex iCS-5000+ DC DeteCtor/ChromatograPhy ComPartment SPeCifiCationS (CONTINUED) Suppressors Suppression Capacities Dionex ASRS 300 (4 mm): 200 μeq/min Thermo Scientific Dionex CSRS ™ 300 (4 mm): 110 μeq/min Dionex ASRS 300 (2 mm): 50 μeq/min Dionex CSRS 300 (2 mm): 37.5 μeq/min Dionex AMMS 300 (4 mm): 150 μeq/min Thermo Scientific Dionex CMMS ™ 300 (4 mm): 150 μeq/min Dionex AMMS 300 (2 mm): 37.5 μeq/min Dionex CMMS 300 (2 mm): 37.5 μeq/min Dionex AAES: 25 μeq/min Dionex CAES: 25 μeq/min Dionex AMMS-ICE 300: N/A Dionex ACES 300 (0.4 mm): 2 µeq/min Thermo Scientific Dionex CCES ™ 300 (0.4 mm): 1.5 µeq/min Suppressor Void Volumes Dionex SRS 300 (4 mm): Dionex SRS 300 (2 mm): Dionex MMS 300 (4 mm): Dionex MMS 300 (2 mm): Dionex AMMS-ICE 300 (4 mm): Dionex AES (Anion or Cation): Dionex ACES 300 (0.4 mm): Dionex CCES 300 (0.4 mm):
System Software Software Chromeleon Chromatography Data System software, supports Microsoft Windows 7, Windows Vista, and Windows XP operating systems Automated Procedure Wizards 2 mm and 4 mm anion and cation membrane suppression available Electrolytic Suppression, Self-Regenerating Standard feature System Smart Startup and Shutdown Standard feature Application Templates Standard feature Automation Support of 3rd Party Instruments Fully controls over 300 different instruments from more than 30 manufacturers, including GC, HPLC, and MS Customizable System Control Panels Standard feature Signal Channels Detector signals, detector background signals, temperatures Data Trending Plots All device numerical parameters plotted System Status Virtual Channels Standard feature Power Failure Protection Standard feature System Trigger Commands and Conditionals Standard feature Daily Audit Trail Standard feature Sample Audit Trail Standard feature System Calibration Storage Factory, present, and previous. Completely user selectable GLP Compliance Optional
Physical Specifications Power Requirements 90–265 V ac, 47–63 Hz; (auto-sensing power supply; no manual voltage or frequency adjustment required) Dimensions (h × w × d) 44.5 × 42 × 57 cm (17.5 × 16.5 × 22.5 in.) Weight 38 kg (84 lb) Flow Path All polymeric (PEEK), anion or cation configuration14
Dionex iCS-5000+ CD ConDuCtiVity DeteCtor SPeCifiCationS Electronics Type Microprocessor controlled digital signal processing, autoranging Cell Drive 8 kHz square wave Linearity 1% Resolution 0.00238 nS/cm Flow Path Plumbing configurations for 4 mm, 2 mm, and 0.4 mm columns, fully inert, PEEK Output Range Digital Signal Range: 0–15,000 µS/cm Analog Signal Range: 0–15,000 µS/cm Noise, Wet Filter Rise times 0 to 10 s, programmable Sample Rate 1 to 100 Hz, user settable or automatic Cell Temperature 5 °C above DC upper zone temperature to 60 °C maximum. User settable, working range is identical to settable range. Cell Temperature Stability Cell Temperature Compensation Default 1.7% per °C; programmable from 0–3% per °C Flow Cell Maximum Pressure 10 MPa (1500 psi) Flow Cell Volume Analytical: 0.7 µL Capillary: 0.02 µL Cell Electrodes Passivated 316 stainless steel. Compatible with MSA Cell Body Chemically inert polymeric material Heat Exchanger Inert, tortuous-path for low axial dispersion
Software Software Chromeleon Chromatography Data System software, supports Microsoft Windows 7, Windows Vista, and Windows XP operating systems Automated Procedure Wizards Standard feature System Smart Startup and Shutdown Standard feature System Wellness and Predictive Performance Standard feature Application Templates Standard feature Automation Support of 3rd Party Instruments Fully controls over 300 different instruments from more than 30 manufacturers, including GC, HPLC, and MS Customizable System Control Panels Standard feature Signal Channels Conductivity, Total Conductivity Data Trending Plots Detector numerical parameters plotted System Status Virtual Channels Standard feature Power Failure Protection Standard feature System Trigger Commands Standard feature and Conditionals Daily Audit Trail Standard feature Sample Audit Trail Standard feature System Calibration Storage Factory, present, and previous. Completely user selectable. Customized Reporting Standard feature with unlimited report workbooks GLP Compliance Optional Physical Specifications Dimensions (h × w × d) 6.9 × 16.7 × 9.9 cm (2.7 × 6.5 × 3.9 in.) Weight 400 g (1.6 lb) 15
Dionex iCS-5000+ eD eleCtroChemiCal DeteCtor SPeCifiCationS Electronics Type Microprocessor controlled digital signal processing Electronic Noise (Wet Noise) IPAD (Au electrode) (Analytical and Capillary) Potential Range -2.0 to 2.0 V in 0.001 V increments Signal Range (Digital and Analog) Integrated Amperometry: 50 pC to 200 µC DC Amperometry: 5 pA to 74 µA Filter 0–10 s response time, user settable Control Mode Local or remote control using relay closures or TTL, or control using Chromeleon software via DC module Cell Body Titanium body with narrow-bore PEEK inlet tubing for capillary format, titanium inlet tubing for analytical format. Compatible with 0.2–0.6 mm i.d. columns (PEEK inlet), 2–7 mm i.d. columns (Ti inlet) Working Electrodes Conventional: gold, glassy carbon, platinum, and silver Disposable: gold, platinum, carbon, and silver Reference Electrode pH-Ag/AgCl combination, one piece design (Analytical and Capillary) PdH, one piece design (Capillary Only) Autoranging Yes Analog Output User selectable full scale of 10, 100, or 1000 mV Cell Volume at Working Electrode Maximum Cell Operating Pressure 0.7 MPa (100 psi) Software Software Chromeleon Chromatography Data System software, supports Microsoft Windows 7, Windows Vista, and Windows XP operating systems Detection Modes DC amperometry, pulsed amperometry, and integrated amperometry. Detection modes include use of multiple waveforms and multiple integration times to optimize detection conditions for individual analytes. Integrated amperometry mode—unlimited changes to the waveform profile’s number of segments, duration of each segment, and voltage applied at each segment. 3D Amperometry Three-dimensional display of the raw integrated amperometry data set, with crosshairs on an (Chromeleon 6.8 software only) isoamperometric plot used to select slices of the plot along the applied voltage axis (to render a chromatogram) and along the time axis (to render a voltammogram). Automated Procedure Wizards Standard feature System Smart Startup and Shutdown Standard feature System Wellness and Predictive Performance Standard feature Application Templates Standard feature Automation Support of 3rd Party Instruments Fully controls over 300 different instruments from more than 30 manufacturers, including GC, HPLC, and MS Customizable System Control Panels Standard feature Signal Channels Electrochemical and total electrochemical signals Data Trending Plots All detector numerical parameters plotted System Status Virtual Channels Standard feature Power Failure Protection Standard feature System Trigger Commands Standard feature and Conditionals Daily Audit Trail Standard feature Sample Audit Trail Standard feature System Calibration Storage Factory, present, and previous. Completely user selectable. Customized Reporting Standard feature with unlimited report workbooks GLP Compliance Optional Physical Specifications Dimensions (h × w × d) 6.9 × 16.7 × 9.9 cm (2.7 × 6.5 × 3.9 in.) Weight 400 g (1.6 lb) 16
Dionex iCS-SerieS PDa PhotoDioDe array specifications Optics Photodiode Array 1024 element Pixel Resolution 0.7 nm Lamps Tungsten and deuterium Optical Resolution 1.0 nm Wavelength Range 190–800 nm Electronics Analog Outputs Four, 0–3 AU, 1000 mV range Control Modes Software remote control through Chromeleon software Flow Cell Standard PEEK or SST, 13 µL, 10 mm path length Semi-Prep PEEK, 0.7 µL, 0.4 mm path length Maximum Flow Operating Pressure 300 psi ( 500 psi ( Performance Noise ±10 µAU at 254 nm (flowing water, 2s rise time) ±15 µAU at 520 nm (flowing water, 2s rise time) Drift Wavelength Accuracy ±1 nm, self-calibration with deuterium lines, verification with built-in holmium oxide filter Linearity > 2 AU Physical Specifications Power Requirements 90–265 V ac, 47–63 Hz Operating Temperature Range 4–40 °C (40–104 °F) Operating Humidity Range 5–95% relative, noncondensing Dimensions (h × w × d) 17.4 × 44.4 × 50.3 cm (6.8 × 17.5 × 19.8 in.) Weight 18.1 kg (40 lb)
tC thermal ComPartment moDule SPeCifiCationS (analytiCal) Temperature Range 5–85 °C (max 18 °C below ambient) in 0.1 °C increments Temperature Performance Accuracy: ± 0.5 °C Stability: ± 0.1 °C Precision: ± 0.1 °C Heat up / Cool down Time Typically 15 minutes - 20 °C to 50 °C and 50 °C to 20 °C High-Pressure Valve Types Six-port/two position - Rheodyne PEEK (injection) valve Ten-port/two position - Rheodyne PEEK (switching) valve Column Capacity Three column sets, 1–9 mm Maximum Column Length 300 mm + 50 mm guard column Precolumn Heat Exchangers (optional) Two low delay volume exchangers General Specifications Standard Chromeleon software Computer Connection USB Leak Detection Humidity and vapor sensors TTL and Relay inputs and outputs Two digital inputs/outputs, two relay outputs Physical Specifications Power Requirements 90–265 V ac, 47–63 Hz Operating Temperature Range 4–40 °C (40–104 °F) Operating Humidity Range 5–95% relative, noncondensing Dimensions (h × w × d) 17.4 × 44.4 × 50.3 cm (6.8 × 17.5 × 19.8 in.) Weight 15.4 kg (34 lb)17
Dionex iCS-SerieS Variable waVelength DeteCtor SPeCifiCationS Optics Optical System Dual beam forward optics design (monochromator) single or multiple (4-channel) wavelength UV-vis detector options Light Source Deuterium lamp for UV range; tungsten lamp for visible range Wavelength Range 190 to 900 nm in 1 nm increments Electronics Analog Output Ranges (optional) 0.001–3.0 AU Rise Time 0.00–4.55 s Full-Scale Recorder Output 1 V or 10 V Data Collection rate up to Full dynamic autoranging digital absorbance signal output to Chromeleon software 100 Hz Digital Output Control Modes Software remote control through Chromeleon software Flow Cells Cell PEEK Cell Path Length 10 mm (Standard and Capillary), 7 mm (Micro) Cell Volume 11 µL (Standard) 2.5 μL (Micro) 0.18 μL (Capillary) Heat Exchanger Volume 8.8 µL Maximum Flow Cell Operating Pressure 725 psi (5 MPa) Performance Wavelength Accuracy ±1 nm Linearity > 2 AU Bandwidth 6 nm at 254 nm Noise Typically - Drift Physical Specifications Power Requirements 85–265 V ac, 47–63 Hz Operating Temperature Range 10–35 °C (50–95 °F) Operating Humidity Range 5–80% relative, noncondensing Dimensions (h × w × d) 15.2 × 44.4 × 50.3 cm (6.0 × 17.5 × 19.8 in.) Weight 15.4 kg (34 lb)18
Dionex aS-aP autoSamPler SPeCifiCationS Sample Capacity 10 mL vials: 81 1.5 mL vials: 120 0.3 mL vials: 120 Well Plates: 288 (3 × 96 standard or deep well) Well Plates: 1152 (3 × 384 standard well) Minimum Sample Volume 10 µL can be sampled from a 300 µL microvial; 20 µL can be sampled from a 500 µL microvial Maximum Injection Volume 7500 µL Variable Volume Range 1–100 µL in 0.1 µL increments; 100–7500 µL in 1 µL increments Injection Cycle Time (including sample 15 s with sample overlap function; 30 s for a 5 µL full loop without sample overlap prep such as dilution) Injection Modes Full Loop; Partial Loop; Limited Sample; Capillary Sampling Technique Pull Mode; Push Mode Injection Precision Fixed Loop: Capillary Mode: Dilution 1:1 to 1:1000 AutoDilution With post-run functionality and Chromeleon AutoDilution License Dilution Precision Carryover Sample Tray Thermostatting 4 °C to 60 °C, optional Sample Conductivity and pH Inline measurement of sample conductivity and pH with postrun functionality, optional Dual Instrument Support Sequential (asynchronous) and Simultaneous modes, field upgradeable, optional Sample Degassing CRD 200/300, upgradeable, user installable Injection Valves One or two 2-position, 6- or 10-port Diverter Valve One 2-position, 6- or 10-port Sample Preparation Dilution, addition of internal standards, concentration/matrix elimination, derivatization, etc. Inline Sample Filtration Dual filter, backflush, optional Software Software Chromeleon Chromatography Data System software, supports Microsoft Windows 7, Windows Vista, and Windows XP operating systems Automated Procedure Wizards Standard feature System Smart Startup and Shutdown Standard feature System Wellness and Predictive Performance Standard feature Application Templates Standard feature Automation Support of 3rd Party Instruments Fully controls over 300 different instruments from more than 30 manufacturers, including GC, HPLC, and MS Customizable System Control Panels Standard feature Power Failure Protection Standard feature System Trigger Commands Standard feature and Conditionals Daily Audit Trail Standard feature Sample Audit Trail Standard feature System Calibration Storage Factory, present, and previous. Completely user selectable. Customized Reporting Standard feature with unlimited report workbooks GLP Compliance Optional Physical Specifications Dimensions (h × w × d) 44.5 × 35.9 × 51.6 cm (17.5 × 14.1 × 20.3 in.) Weight Power 90–265 V ac, 47–63 Hz Flow Path All polymeric (PEEK), anion or cation configurations
|
CopyRight 2018-2019 实验室设备网 版权所有 |