vFlash

vFlash Remote is executed by the expert in his office. It controls the reprogramming procedure. The Access Point runs at the vehicle/ECU location and updates the ECU(s) with new software.

vFlash Access Point may be executed via a Windows-based PC with an installed vFlash Access Point and Vector Network Interface.

The download of the vFlash Access Point required for this can be requested by clicking the TAB "Download Access Point" at this content element.

The remote connection between vFlash Remote and the vFlash Access Point is always encrypted. This ensures that flash data cannot be seen or manipulated by third parties. Furthermore, the transfer of flash data to the Access Point is decoupled from ECU reprogramming. Reprogramming is not started until the data to be flashed has been fully transferred to the Access Point and has passed a plausibility check.

The user gets added transparency from continuous display of progress information during the flash procedure, qualified status feedback after completion and optional generation of a report for documentation purposes.

Like vFlash, vFlash Remote works with flash templates which implement the flash specifications of the automotive OEMs. Currently, more than 140 templates are available for over 80 different OEMs.