皇声CA600功放 | 您所在的位置:网站首页 › ca1000功放 › 皇声CA600功放 |
皇声CA600功放 ![]()
![]()
![]()
![]()
皇声CA600功放 技术参数:
*超薄的2U结构,抗震性极好专为工程和流动演出而设计。 *全平衡超动态重驱技术,在驱动重负载时声音表现自如。 *高信噪比(100dB以上),噪声极低。 *信号和削波发光LED指示灯可监视功放的工作状态。 *全自动保护电路包括DC(直流)、过流、过压、 过热和动态自动限幅保护,确保功放稳定、高效的工作。 *大功率自调节双速风扇,有效降低机内温度,提高系统可靠性。 *经典的两种工作模式立体声/桥接满足不同系统的搭配。 *每个通道都采用Neutrik speakon输出插口和1/4英寸输出插口 *共4路接线柱,支持所有扬声器布线系统。
* Ultra-thin 2U frame, with the feature of resist-shake specially design for the project and flowing performance. * Dynamic full balance of ultra-wide drive technology can make free sound when driving heavy loads. * High SNR(above 100db), low noise. * The signal and shining LED indicator with Direct Wave Clipping can inspect work status of the amplifier. * Full automatic protection circuit which including DC、overcurrent、overvoltage、overheating and dynamic automatic limitation protection, ensure the stabilization and efficience of the amplifier. * The double-speed and high-power fan automatically regulate, reduce inner temperature and enhance the reliability of the system. * The classical work mode of stereo/mono/bridge meet to the coordinate with different system. * Each channel adopts Neutrik speakon output inetrface and 1/4 inch output inetrface, add 5- way terminal, supporting the all londspeaker cabling system.
品牌型号 皇声CA600 皇声 CA1000 皇声CA1200 Output Power输出功率立体声8Ω+8Ω 300W×2 500W×2 600W×2 Output Power输出功率立体声4Ω+4Ω 450W×2 700W×2 850W×2 OutputPower(BRIDGE)输出功率桥接方式8Ω 600W 1000W 1200W PowerConsumption耗电量 2200VA 3000VA 3600VA Dimensions外型尺寸(W×H×D) 482×90×430mm 482×90×430mm 482×90×430mm Weight重量 18kg 21kg 24kg Shipping Weight运输重量(1PCS) 21kg 24kg 27kg Frequency Respones频率范围(+/-0.5dB) 20Hz-20KHz Input Sensitivity输入灵敏度 0.775V Input Impedance输入阻抗 40KΩ平衡/20KΩ不平衡 Noise (unweighted)信噪比 >100dB Slew rate转换速度 >30V/uS Power Supply供电电源 220V/AC/50Hz
|
CopyRight 2018-2019 实验室设备网 版权所有 |