分享华三AP瘦模式切胖模式的方法，建议你收藏！以免下次找不到！

Boot System

Enter Serial SubMenu

Enter Ethernet SubMenu

File Control

Restore to Factory Default Configuration

Skip Current System Configuration

BootWare Operation Menu

Skip Authentication forConsole Login

Storage Device Operation

Reboot

===================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9): 此处按键 Ctrl+F，作用：格式化flash

Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y //输入Y

...........................................................................................................................

Format success.

=======================================

Boot System

Enter Serial SubMenu

Enter Ethernet SubMenu

File Control

Restore to Factory Default Configuration

Skip Current System Configuration

BootWare Operation Menu

Skip Authentication forConsole Login

Storage Device Operation

Reboot

===================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9): //按键Ctrl+Y，设置ap胖模式或者瘦模式

Please select the new mode

Current mode is Fit //提示当前是fit瘦模式

===================================================================

NO. Mode

1 Fat Mode

2 Fit Mode

0 Exit

===================================================================

Enter your choice(0-2):1 // 输入1，即fat胖模式

Changed to fat mode successfully! //修改成fat胖模式成功

=======================================

Boot System

Enter Serial SubMenu

Enter Ethernet SubMenu

File Control

Restore to Factory Default Configuration

Skip Current System Configuration

BootWare Operation Menu

Skip Authentication forConsole Login

Storage Device Operation

Reboot

===================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9): 3 //进入以太口子菜单

==============================================

Note:the operating device is flash

Download Image Program To SDRAM And Run

Update Main Image File

Update Backup Image File

Download Files(*.*)

Modify Ethernet Parameter

Exit To Main Menu

===================================================================

Enter your choice(0-5): 5 //修改以太口参数

========================================

Note: '.'= Clear field.

'-'= Go to previous field.

Ctrl+D = Quit.

===================================================================

Protocol (FTP or TFTP) :ftp TFTP

//忽略输出内容，直接输入TFTP，然后回车

Load File Name : WA5300-CMW710-E2329P01-FAT.ipe

//忽略输出内容，直接输入WA5300-CMW710-E2329P01-FAT.ipe，然后回车

WA5300-CMW710-E2329P01-FAT.ipe 是胖版本文件名称

Target File Name : WA5300-CMW710-E2329P01-FAT.ipe

//忽略输出内容，直接输入WA5300-CMW710-E2329P01-FAT.ipe，然后回车

WA5300-CMW710-E2329P01-FAT.ipe 是胖版本文件名称

Server IP Address :192.168.0.1

//忽略输出内容，直接输入电脑主机的 IP，比如192.168.0.1，然后回车

Local IP Address :192.168.0.50

//忽略输出内容，直接输入和电脑主机的ip同一网段，比如192.168.0.50，然后回车

Gateway IP Address :0.0.0.0

//忽略输出内容，直接回车

备注：注意给电脑手动配置一个与AP同网段的IP地址，保证电脑与AP路由可达

==============================================

Note:the operating device is flash

Download Image Program To SDRAM And Run

Update Main Image File

Update Backup Image File

Download Files(*.*)

Modify Ethernet Parameter

Exit To Main Menu

===================================================================

Enter your choice(0-5): 2 // 输入2，更新版本

Loading.................................................................................................................Done.

38265856 bytes downloaded!

Image file wa5300-fat-boot.bin is self-decompressing...

Saving file flash:/wa5300-fat-boot.bin .................Done.

Image file wa5300-fat-system.bin is self-decompressing...

Saving file flash:/wa5300-fat-system.bin ..............................................................................................Done.

==============================================

Note:the operating device is flash

Download Image Program To SDRAM And Run

Update Main Image File

Update Backup Image File

Download Files(*.*)

Modify Ethernet Parameter

Exit To Main Menu

===================================================================

Enter your choice(0-5): 0 // 输入0，返回

=======================================

Boot System

Enter Serial SubMenu

Enter Ethernet SubMenu

File Control

Restore to Factory Default Configuration

Skip Current System Configuration

BootWare Operation Menu

Skip Authentication forConsole Login

Storage Device Operation

Reboot

===================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9): 0 // 输入0，重启AP

System is starting...

设备启动完成

Press ENTER to get started.

//升级成功

%Dec 15 18:56:54:395 2017 H3C SHELL/5/SHELL_LOGIN: Console logged infrom con0.

建议与总结：

先Ctrl+F格式化flash，再Ctrl+Y选择胖模式，最后加载fat版本。返回搜狐，查看更多